Cold Air Intakes: STOP MESSING THIS UP!

Подписаться 90 тыс.

Просмотров 42 тыс.

50% 1

Cold air intakes are a cheap easy way to get in to modding your vehicle's engine. They are relatively inexpensive to obtain and require almost not skill or knowledge to instal.... And that is a bad thing! Because CAIs are cheap and easy, they have been misused and misunderstood for years!
K&N Cold Air Intake Kit (99-04 Grand Cherokee):
amzn.to/31MclkO
The vehicle in this video is a 2001 Jeep Grand Cherokee 4.7L V8.
Get 10% off all GRYPMAT gear by using code D&E10 at
www.grypmat.com?aff=DEinthegarage
HAS ONE OF OUR VIDEOS HELPED OR ENTERTAINED YOU?
Want to help up make more?
Checkout D&E Merchandise and our Patreon Page..
T-Shirt, Beer Koozies, Stickers and More:
www.etsy.com/shop/DandEintheg...
Become a PATREON and receive D&E gear as well as exclusive content:
/ dandeinthegarage
We hope you enjoyed this video and will keep in mind that all information included is intended to be purely academic and in fact is only the opinion of D&E. We are not professionals, nor are we qualified to knight you a professional. D&E want to ensure that anyone modify or fixing their own vehicle does so in a safe manner which leaves the vehicle in a legal, roadworthy state. In short, DON'T BE A MONKEY WITH A TOOL BOX! If you don't know what you are doing, leave it the professionals!

Авто/Мото

Опубликовано:

8 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 60

@rvmagnum5415 2 года назад

back when I was 17, I ran a vacuum hose from my engine to the inside of my 62 buick to suck the cigarette smoke out of the car, lol.

@TangoCharlieAlpha 4 месяца назад

Well........I'm 51, and that is the first time I've ever heard of someone doing that! Hat's off to you for your ingenuity!! 😄

@natewj1077 2 года назад

I'm 19 and I have to admit, I love intakes and exhausts, but one thing I hound on my buddies is: leave the sensors! I hate it when someone modifies their exhaust and they delete the O2 sensors, and wonder why it runs like crap... Leave the sensors alone!!

@Rogue--gg6nt 3 месяца назад

super late but this comment is real asf im 16 and even i know that my shitty civic needs its sensors to run right

@enhancedphysique6452 2 месяца назад

Yep around 19 you learn that. Good stuff. True. No longer sawing everything out no more ripping head rest off to save weight hahaha don't matter

@fdmackey3666 2 года назад

Your Dad "recreated" the first "homemade" cold air intake I ever saw on a street legal vehicle back in the 1980s. By the way, our immediate neighbor just gave his youngest son his bone stock Ford-Mazda Ranger "step side" pickup with just over 500,000 miles on the clock. Yes, you read correctly, just over 500,000 miles. The engine and transmission (five speed manual) were original to the truck with only the clutch and throw out bearing having been replaced at about 250,000 miles. Otherwise, our neighbor only did basic maintenance (oil, hoses, belts, tires, etc.) to the truck he purchased new from a local dealer. Enjoyed the video as usual! Keep the great entertaining and informative videos coming! Merry Christmas and Happy New Year to you and yours!!!

@larryfogle3697 2 года назад

Some of those same engineers put alternators under the intake manifold or the battery in weird places etc.

@johnbarker5009 5 месяцев назад

This was a really good video. I laughed and immediately upvoted at the point you got in an argument with the filter box and said "give it back!"

@robertkeenbuildingmylifesh3429 2 года назад

I just got me a diesel truck build on my channel, I had to replace my stolen work truck... I'm going to be putting my same type of cold air intake I had on my other truck....Salute to everyone grind, Motivations, accomplishments , families , goals.....

@sjddjs 8 месяцев назад

This guy is fantastic! Informative and extremely entertaining!

@xc8487 2 года назад

I have an 02 KJ 3.7. I replaced the resonator box with a tube from an 04+, got a K&N panel filter, and covered the air box and pipe in DEI reflective material. About as cold as its going to get.

@NXT_LVL Год назад

8:40 Snoozel lol perfect! Mine in my 4.7 Dakota didnt route like yours did, it turned 80 degrees and pointed into the inner fender, so yeah, I 3D printed my own Snoozel to pull straight from the front grill, like yours, while still using the stock system and drop in K&N.

@theortegas5502 Год назад

I am from San Diego CA and recently recharge my spectre filter on my f150 since it was pretty much a dust ball and went to a long road trip, added to the fuel tank a redline injector cleaner and did the numbers for my mpgs and it really helped. I honestly don't know how I feel about cold air intakes but I do like them. I guess my suggestion is that if you don't have the money it's really not necessary.

@rvmagnum5415 2 года назад

I picked up the dana 44- 2 weeks ago for my 2000 wj, its been down for 4 years (long story) at the u pull ( garys, my favorite ) . well there was a complete cold air system and I forgot to take it, im not that big into cold air system but it would have been nice to have it on hand. I did grab the led tail lights for 30 $ ( there on amazon for 140$ ). Cant wait to get my jeep back on the road.

@Bighorn_Rockcrawling 2 года назад

I did the the ol’ dryer vent through the passenger side headlight. Not legal but it’s cold air

@anthonyjacksonjr4812 5 дней назад

Thanks for the explanation. 💪🏾💪🏾

@jamescaldwell2095 2 года назад

What people don't realize is how detrimental they can be. Best example besides sensors left put would be the big ugly bellows or chambers built into the sides of the tubing. Especially in older cars, taking them off can hurt performance. But it does sound good.

@Bulletz4Breakfast13 Год назад

Where do I get one of these Snoozles for my 02 Jeep Grand Cherokee Laredo 4.7L? Mine was missing the day I got it! Had no clue what it was even called. Been watching Jeep vid after intake video to find the part. Literally the only youtube video that has even mentioned that hose from grill to filter housing!

@michaellacy6285 4 месяца назад

Bruhhhh, how you not gonna make a port for your PCV valve. That is just as essential as the sensors you had time to mention lol

@PREDATOR07 Год назад

I don't have the link but there's an article by Mopar showing a few upgrades recommended by them cold air intake by K&N gaining 7 hp.

@bobvedder2451 Месяц назад

I had a F350 that had the air coming in from the right fender. I put on a cold air intake and thinking of where it was getting air, didn't have my filter feeding directly from the right fender. When you drive in snowy and freezing rain etc. All of the freezing crapola get adhered to your air filter. I now drive a gladiator with a drop in k&n filter, leaving the existing cold air filter working.

@lowellstokes5328 2 года назад

I didn’t really need advice but watched for fun & he’s pretty entertaining! I too enjoyed the reference. Well done!

@DEInTheGarage 2 года назад

Thanks!

@thomasallen4211 6 месяцев назад

I like K&N or Iceman if I don’t build it myself. I make a plate like K&N uses to help keep engine heat from the filter. I also wrap the tubes with header wrap to help them from getting hot and creating an oven effect to the air going through the tube. But, with using a DRB to check the temperature readings in the intake. It shows a lower temperature than it was with the stock box. Oh, I also put pre-filters on my filters to help keep them cleaner longer. I’ll try to send you a picture of one of mine.

@kh83401 2 месяца назад

Are you talking about a plate sealing the top instead of the supposed hood being the top of the box. I’d like to see your top plate and insulation. Also, a pre-filter to the cone filter? Thanks

@brothawill1596 9 месяцев назад

Hey you got the same color Jeep, motor and everything as a Jeep I just got, how did you know the alternator was bad, my voltage will go down then sometimes jump back up when driving

@robertgrauman8602 2 года назад

It's been years since I've heard a joke referencing Of Mice and Men. Nice one, lol.

3 месяца назад

I am 26f and going to modify the stock setup to take cold air from the fog light grille straight into the airbox on my toyota

@mindyabiznessthatsalljustm8134 Год назад

8:55 - 8:57 sounds like typical playtime with my cats LOL

@pablopervguy4355 2 месяца назад

what if you cut a hole in the hood and install a hood scoop on top of the filter??

@tadavis12 2 года назад

I don’t know if it’s considered a cold air intake, BUT…. On my first xj I ever had I took a nice 2” hole saw to the factory air box. I made Swiss cheese out of the air box and put in a k&n drop in filter and 16 year old Tyler thought it was the coolest thing this side of the Mississippi. Not realizing or even thinking that it’s pulling in hot air directly from the headers… young, dumb, and full of s**t haha

@b_delta1733 11 месяцев назад

I love your insults thrown throughout this video bro lol. Came for Cold Air Intakes, stayed for the insults lol

@jorgemora7190 4 месяца назад

Hi d@e l like your video and l hope you and family get it nice time with the family and friends

@abu_salimullah445 Месяц назад

Where can i find a replacement tube for the N47 bmw f20 diesel where the air flow sensor comes ? I cant find it anywhere. Want to place a cold air intake wirh a universal ramair filter

@69bushwa69 9 месяцев назад

Not all that long ago I put a cold air intake w/K&N filter onmy 03 Grand Limited and immediately lost 100 miles per tank of gas. I put the stock stuff back on and got back half of that loss. So needless to say... I will not fuck with the engineered system any more.

@sarahm.2053 3 месяца назад

better to just connect a small hose to your inside ac cabin vents to suck REAL cold air into your engine air intake into the air filter box. For a TRUE COLD air intake system...atleast if your AC works and you have your ac on. just have to have a electronic cut off if you have the heat on in the vehicle.

@bassw1758 9 месяцев назад

Na man, almost all factory intakes are horrible, and a cold air intake is going to increase horsepower by 5 to 10%, if and only if you fabricate it in a way that fresh flowing air is getting to it. If not you're looking about the same hp maybe a little less. The difference is this fist off CAI are for the enthusiasts, automobile manufacturers rarely cater to the enthusiast. The stock intake system usually has a resonator and they're going for quiet. But the reason why you get a five to ten per-cent horsepower gain from a cold air intake is there's a suction and a vacuum, nothing more than a pipe with a filter, most stock intake systems are like a straw with holes in it. Its design like that on purpose in case you drive through a big puddle, water doesn't get sucked up into the engine. And some cars are extremely easy to install a good CIA because they have a lot of room under the hood, you just open up the front grill a little bit, and slap a cone filter right in the middle of it where the air is coming through, instant hp gain. But other vehicles the engine compartment is so cramped it's hard to get air flow without doing more severe alterations.

@joshrichardson9537 2 месяца назад

100%

@davidsinnett9207 8 месяцев назад

Injen cold air intake

@K8Nicole 4 месяца назад

" I said give it back" 😂

@wulfclaw4921 10 месяцев назад

Back in "the day" we eoukd take the rou d air filter cover and flip it over and get a lil sound out of the carburator. I just put one of these stupid cold air intakes on my Jeep and it sucks ....no more - actually less throttle response. It's a joke !

@pennypackmtb2542 Год назад

Not installing the proper intake correctly, can have the opposite effect.

@liammeharry 2 года назад

Never forget to segregate your air

@dancearoundtheworld5360 21 день назад

does anyone make a MAF sensor that will accept the inceased air and not throw a check engine light ?

@The-JMartian 19 часов назад

Do you have the engine light on, if so what code it come up with, on my 4.0 I had no problem .

@dancearoundtheworld5360 17 часов назад

@@The-JMartian i only get a engine light if i do a short ram not a long ram, but after some looking i dont have a maf on intake pipe a MAF designed to add fuel with more air would be healthier for my 4 cyl but it appears it doesnt exist i have a engine light sometimes for knocksensor but also need vaove adjustment and seen a trans mount blown so that could trigger a false code po325

@The-JMartian 17 часов назад

@@dancearoundtheworld5360 a long shot here , but make sure you have a good ground from the ECM/PCM to the engine, also cheque timing

@dancearoundtheworld5360 17 часов назад

@@The-JMartian thanks guy, i need to locate my ECM and do some more poking

@liljohnsonusmc 10 месяцев назад

Thor cowl intake

@Sncedayone 6 месяцев назад

Carbon monoxide in garage

@mechsupernova 4 месяца назад

I found the metal K&N on craigslist for $35 it seems like my jeep runs better with it and it definitely sounds better.

@JohnDoe-jq4mr 2 года назад

ALWAYS go throw the hood ALLOWS!!!

@claytonbyrd6134 2 года назад

Hwat?

@JohnBoulding Год назад

Don't buy one , problem solved. Engineers make great CAI called your factory air box. An ECU tune is your only teal power mod

@michaelfulton6662 11 месяцев назад

Wow you talked a lot man....

@rambo.69 11 месяцев назад

Dude why are you so snipey about everything?? Anyway decent video.

@michaelfulton6662 9 месяцев назад

Man you another one.. talking talking talking...God dam

@MunkyNutz13 7 месяцев назад

😂Bro, NO SHIT.. I guess we can't really hate too much, he's getting the good shit.. He was already far past "fully geeked the fuck out" a couple of days before the video was made..There's usually a cut off point when a man simply just needs to sleep.. My man here is so fucking twacked, he's about to snap and think that eating infant children's viscera is normal 😂.. Seriously Bruv, go to your room, hide all your paraphernalia and nose candy and shit, take you a short little time-out.. Maybe like a week and a half or something.. Before you start freaking out because you can hear your beard growing or some shit 🤘