Coleman B200R Minibike First Impressions & Ride 

Yeah I gave out bad information a few days ago thinking it was 5/8.

I wanted to put old school Briggs on mine and have to put bushing on the shaft so the newer clutch will fit

What's the gas mileage on the 1 gallon tank?

@@DaMasonJar depends on the engine and how much you push it, taking it easy on the 196 will go for longer, maybe 75 Miles. Nowadays with my 224 I’ll do about 50 or 60 miles on a tank but I always carry even just a little extra fuel with me in case I need it since I prefer going on longer rides.

I agree, a torque converter is the way to go for a more reliable build I would say. Which is why that’s going to be my biggest performance modification. Keeping the engine itself fairly light on upgrades and keeping up with maintenance will definitely help keep it more reliable and help the engine last a lot longer.

What torque converter do you guys recommend installing on this bike?

@@alexc199930 series, I have 3

@@pfmachineshow would it be more reliable with a torque converter and belt driving it. Straight Chain drive and a jackshaft with two different chains is the way to go for long distance driving. Torque converters are better for racing off road and short distance driving in my opinion. Not trying to be rude or anything.

I feel ya bro. A sneeze did it for me lol

Do some perfect form squats and banded oblique twists every day, that should prevent that from happening

I just saw that at the store. I'm getting it for sure

If your planning on riding it off-road a lot, the stock tires leave a lot to be desired in my opinion. A lot of people go for sunf tires and other brands make mini bike tires as well.

Its a pretty good bike doesn’t need anything before ridden. If you are looking to upgrade it though i would get a new set of tires [sunF are pretty good] and maybe a new front suspension if you want but i think its fine.

Loosen the throttle lever bolt, it needs to be loose enough to where the throttle lever is loose and springs back.

I will try that thank you and let you know. @@pfmachines

Well, I had already done that I guess when I was playing with it the first time. Not really too familiar with all the parts but I noticed that was a little tight and restricting it. Still not springing enough though. But I went into the trusty fix all tool bag and found that an elastic band finally did the trick after lots of fiddling around. Strapping that to the throttle lever to help pull it back was perfect. We had a fun hour or two of riding and breaking it in. Nice to see him smile rather than panic lol. Either way thanks for the help and if I get to the root of the actual problem, I will let you know. Might buy a nice spring to help with that return next time I'm out as elastic will break down eventually. Thanks

Got it from harbor freight, it carries up to 400lb of bike. I may make a video on it since people seem to be interested in something like that.

That’s good to know, definitely will be doing a torque converter on mine so looking forward to that.

By the looks of this frame design an engine riser may get interesting.

Ok I may have been wrong. I put a torque converter on my b200r yesterday. I didn't measure the shaft. But the torque converter I bought was this one and it fit perfectly (Vevor 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40 or 41 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter). Because of the frame I had to get this riser (JMCHstore Torque Converter Engine Motor Riser Hardware Kit for Predator 212cc) it's just a 1 inch high square tube. It fits with no room to spare so the ones that rise any higher or shift is the engine forward will not fit. Also I used a grinder to cut a little bit off the chain guard where the torque converter case is. Because of the tight fit, I will have trouble replacing the air filter. My fix is that I will change out the air intake.

My b200 has 3/4 shaft

@@dabosssr24 the b200 already comes with a torque converter? Does the engine have risers or is the b200 not need them?

Not this 196 clone. It’s 3/4

True 196 clones have always had a 3/4" shaft. Three of the Coleman models used a 196 with a 16mm shaft, not 5/8". The Hisun engine Coleman used is the only 196 with the smaller shaft. These Coleman minibikes and Predator 212's didn't exist when I started buying clones.

23mph stock, with my current upgrades as of may 2024 it will do 45 on smooth road pretty comfortable.

What’s the best way to atleast make it go 30

@@Walterwhite77172 install a 30 series cvt

@@pfmachines what did you put to make it go 45? was it the 30 series cvt or something else

@@TrustyJameo 30 series with a predator 224

Because we like the challenge

plus they are too expensive lol. Fkn people want 2500 for a 2003 pit bike 😂

@@dank9288639 I agree so much with you man😂

​@dank9288639 that's used car prices🤣🤦‍♂️