Coleman CT200U-EX goes 60 MPH with a predator 212

Подписаться 85 тыс.

Просмотров 329 тыс.

50% 1

Coleman CT200U-EX goes 60 MPH with a predator 212
Installed a Predator 212 with a straight chain on the Coleman CC200U-EX minibike.
Did a top-speed run to see the results of the swap?
Coleman CC200U-EX playlist - • Coleman CT200U EX mini...
Instagram - doubledown555black66
Music - Nomyn - Flow _ Background Music No Copyright (Ambient)-W4oYpyu3wDc
________________________________________________
Parts used -
ARC.020 billet rod - www.arcracing....
ARC billet flywheel - www.arcracing....
hemi/
GX 160 head - www.ebay.com/i...
_trksid=p2060353.m1438.l2649
VM22 Mikuni carburetor - www.ebay.com
/itm/194372879282?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649
Header pipe - www.gopowerspo...
Clutch - www.ebay.com/i...
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 462

@albertpeterson7134 2 года назад

Cool Video Keep Them Coming

@Black66 2 года назад

Thanks !

@truthseekerKJV Год назад

A wise man once said, before you make a minibike go three times as fast, make sure it's brakes stop you 4 times as good.

@Black66 Год назад

Check out the CT200U-EX playlist. Have front and rear disk brake conversion.

@sportsmobile8328 9 месяцев назад

Exactly. Way too scary at an older age. I don't heal as fast.

@Metalcrystalmusic 6 месяцев назад

@Black66 you should paint it and replace the light with a skull and convert the storage into a gas tank and put luggage racks on it and handgaurds and new grips custom pegs and finally that's all I have to say

@Metalcrystalmusic 6 месяцев назад

@Shotifyz I tried doing some of them but not to long ago I left my bike out at my freinds all weiner it still runs but we were gonna fix the exhaust cause it broke off I fixed it today but now I just need to fix the pull start get a new exhaust and I'm gold

@ralphbarker7791 2 года назад

Awesome videos. I am 60 and I still like these minibikes. Big changes in speed though since the Tecumseh 3.5 that I had from Sears.

@dominickgonzalez1388 2 года назад

I wouldn’t doubt if he just has 5 212 predators mounted together for his car engine.😂

@Black66 2 года назад

Hmmmm...great idea!!!

@williamhartman9 Год назад

That’s funny

@HdhehdhdhdhHehhehdhdbd Год назад

No,when u first get it already dose 30mph

@rcinful 2 года назад

You're a braver man than me. On my lightly modified RB200 @ 45 mph I'm cringing about doing that on Chinese bearings.

@scottcolbern2224 2 года назад

What modifications did you do to it? I'm thinking of buying one and would like to get it up to some speeds like that

@rcinful 2 года назад

@@scottcolbern2224 Governor delete, vented crank case, billet rod, CM Super X grind .265 cam, flat top piston, .010 headgasket, 22 lb valve springs with .060 shims, champion rockers, Chikuni 24mm flat slide carb.

@rcinful 2 года назад

@@scottcolbern2224 oh and a PVL aluminum flywheel.

@EllisDesignandTradeCo 2 года назад

@@rcinful Bro, can you send me a detailed list of the parts and where you got them? My brother did a converter but it only tops 30, I'm trying to get at least 40-45.

@Draco900 Год назад

My predator 212 that I took the governor off and got a modified carburetor goes 70😭

@donkeyhole2782 2 года назад

I know you've done torque converter comparisons before. I would love to see the comp on this bike. However, I really like the simplicity of the straight chain, and it seemed like it has enough power to drive around in normal traffic. In my town, we are allowed to ride on all the streets (except main street) with our minibikes and ATVs. If we get a safety inspection pass, then we can go on main street also. I want to get this same bike new, make it like yours, and put blinkers, mirrors, front brake, and street tires, so I can cruise town and go anywhere I like. I love this channel! It's like minibike school and so fun. Ride that beast!

@Black66 2 года назад

Thanks, man! I am happy you like the channel. I have fun making the videos. Ya, I think a straight-chain would work really good on one of these bikes with a 60 sprocket on the back versus the 50 that's on there.

@Black66 2 года назад

It is really cool you can ride all over town legally.

@bt4b4 2 года назад

@@Black66 love your videos of these Coleman’s. Can you do another video explaining the difference in straight chain vs torque converter and 40 -60 sprocket ?

@Black66 2 года назад

@@bt4b4 I'll get back around to working with the big bikes again.

@adventuresofhunter Год назад

That’s awesome what state are you from

@keithcola9104 2 года назад

That still had more in it!!!! I have the same set up brand new bike and motor just not the cam n things which is coming!! Still so amazing what these little motors can do!! Thanks for ur vids much learned!👍🏾

@Black66 2 года назад

Thanks!!

@DaWiTtLeR 2 года назад

Your videos are very informative and educational, could you do some uphill test so we can see more of what the torque is like on straight chain setups

@Black66 2 года назад

Thanks! Ya, I have been wanting to do some off road stuff . I’ll have to do that .

@babyboy3972 Год назад

Dan it's garbage on straight chain no power at all I've got a predator 212cc removed the revlimiter out of the motor and added a performance muffler and a torque unit and it's fast at 60mph and has lots of climbing power

@babyboy3972 Год назад

@@Black66 OMBWAREHOUSE THEY WILL HAVE ALL THE PARTS YOU NEED

@GalvanizedSquareSteel891 Месяц назад

60 on a mini bike is absolutely outrageous 😂

@Black66 Месяц назад

Check out the 80 MPH mini video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zbn2shqOuaQ.html

@asphaltcowboy7868 2 года назад

I have a stage 4 predator on a drift trike and always thought about building another engine and put it on a mini bike...great build..

@Black66 2 года назад

Thanks! I really like this combo

@Strict30 2 года назад

Bro that thing is moving good

@mikestevens3506 2 года назад

I put a built and dyno'd 16 hp ducar motor on my minibike, which is only slightly bigger than your Coleman c100 (it's an old 60s Montgomery). And the thing hits 60 on the dot with a straight chain within a couple seconds. The thing is a total death trap and I love it hahah

@Black66 2 года назад

Awesome!

@caseycollins4633 2 года назад

How tight should my chain be

@cibdizzy 2 года назад

60 mph on that mini bike . You gotta be nuts to go that fast

@Black66 2 года назад

Check out this bike. It went over 70 MPH ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xV8i59aGUao.html

@chucotacos661 2 года назад

I'm doing this right now to my bt200x coleman can't wait to try it out once it's done

@Black66 2 года назад

It's gonna be a rocket ship!

@SWATT101 Год назад

My first bike was a mini with a Tecumseh motor...gas was .35 cents an imperial gallon! Broke a ring and scored the piston and cylinder...that was the end of that. 50 years later...still breaking motorcycles lol

@yeaveslewis8430 2 года назад

Man I wish I was good with my hands like this

@bigpoppachino3437 2 года назад

Awesome 💪🏾

@AnGryCruizer 2 года назад

BEAST MODE ACTIVATED!!!!!!!!!!!!GoDSPeeD

@Black66 2 года назад

Yes!

@bigmacmillerlite8775 2 года назад

Bro you just saved me a ton of time dude. I just got a Chikuni and I haven't been able to figure out how to load it. Smfh

@Black66 2 года назад

Glad I could help

@antoniohouston9088 2 года назад

Damn Good Video. Build Em N Ship Them. I Hav3 500-700$ $ bucks Rn for something like that that’s the most I can budget in with all the other stuff I have.

@Black66 2 года назад

Thanks!

@clarencewilliams7088 2 года назад

Great Video! 👍 and easy to understand 👌. thanks

@mikesbarn1858 2 года назад

Not sure I really want to go quite that fast. FYI I made a springer seat for my CT200UEX . Much more comfortable. Hinges at front and springs on rear. I will be using info from your other video to tune my carb properly. Thanks again.

@paulburrell1062 Год назад

Dude! You are like Burt Munro. You're gonna have to get that thing to the Salt Flats to really open her up!

@Black66 Год назад

Thanks! Check out the CT200U-EX playlist. We got it to run faster ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@specialspaghetti3290 2 года назад

Just built an engine just like that can't wait to get it on my bike

@guygalloway5448 2 года назад

I really appreciate this video and you telling me about this engine ✊

@Orlosthedruid 2 года назад

Just...DAMN!

@greengarage5682 2 года назад

Great video man you commented back on one of my comments super fast got another sub! Keep up the good videos and you will be a hit one day on RU-vid

@Black66 2 года назад

Thanks! Maybe, but if not that's ok too. It's fun doing the videos.

@MikeBeatzcom Год назад

Great video!!!!

@Black66 Год назад

Thanks! Check out the CT200O-EX playlist ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Up6TpJiopEo.html

@999benhonda 9 месяцев назад

I've watched a few vids, he builds the engines but sticks with a centrifugal clutch. A TC does a lot to boost the acceleration without losing top end. Even a stock 212 with a TC is better imo then a mild mod 212 with a centrifugal clutch. I suppose one could argue that a centrifugal clutch is fine for the street. Offroad, you definitely want a TC.

@Black66 9 месяцев назад

Check out the mega Moto and Coleman playlists for many bikes with a torque converter. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-i-aHzA_lQIE.html

@scottmarsalis4363 2 года назад

Im impressed

@Black66 2 года назад

Thanks!

@royalconstrictor0005 9 месяцев назад

Sweet!

@yeaveslewis8430 2 года назад

Great video brother

@Black66 2 года назад

Thanks! Check out the CT200U-EX playlist for many more combos with this bike. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@kingazhar1212 9 месяцев назад

Woooohooohooooo brother this is insane 🔥🔥🔥🔥🔥 . Love your videos man i wish to see more. Merry xmas to you and family mate . Just tell me if we could import that engine to mauritius island and how much it would cost please

@Black66 9 месяцев назад

Thanks! lol

@donkeyhole2782 2 года назад

That was awesome! Do you think the 196cc engine that comes with this bike could be made to do something close to that performance? What part of the bike was rattling when you go over bumps (fenders, kickstand, other)?

@Black66 2 года назад

Check out my other videos with the 196cc. Ya, the fenders where rattling

@trtlepwr 2 года назад

Appreciate the good vid! Hey, was it a straight chain set up? 😅

@Black66 2 года назад

Thanks! Yes, it was a straight chain. Check out the CT200U-EX playlist. There have been many different combos on this bike. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@kdbuilds619 2 года назад

I’m building one because of you

@Black66 2 года назад

Ah sweet! Your gonna love that bike!

@shanepotter6067 2 года назад

I have two of these bikes and I'm buying a 3rd, they are just so fun

@Black66 2 года назад

They are fun bikes! Stock or modified, they are all fun. Check out the video coming out on Saturday with the CT200U-EX. Thanks for watching!

@shanepotter6067 2 года назад

@@Black66 I plan on watching all of your videos you make very informative videos and I plan on subscribing the hurricane just hit in Florida and we have nothing to do but Moder bikes me and my son found your Channel

@shanepotter6067 2 года назад

@@Black66 do you happen to have a video that explains how far you can push these bikes before they break or what mods need to be done if you make a certain mod thanks

@pacmanxm 2 года назад

Hey bro! I love your videos and you seem very knowledgeable. Could I ask for some help? I just recently got into mini bikes, I wasn’t allowed to have “dangerous things” like this growing up so I’m not sure of some things. If I change from the stock engine to a predator 212 will the jack shaft plate work? Also will I need a new clutch? What clutch, if so, would you suggest!? Thank you in advance

@Black66 2 года назад

Yes, the plate will work. You need a 3/4 shaft #41/420/40 chain clutch. Something like this www.gopowersports.com/10t-3-4-bore-centrifugal-clutch-41-420/

@babyboy3972 Год назад

If you get a predator 212cc motor to put on it get a torque unit and a performance muffler remove the Governor from the motor and it'll top out at 60 mph fast and fun

@goadmerle 2 года назад

That was impressive. But bet that was scary on them stock nobby tires. That would really fly with some street rubber. I have the same bike. And i know those tires hate the street 🤣 my brother never rode one of these. Jumped on mine went flying down the street,and couldn't make the corner 🤣 ended up going straight through someone's yard🤣🤣

@Black66 2 года назад

That is awesome! sounds like you guys have fun with your bikes. Ya, some street tires would be a good upgrade for the street for sure.

@laithen4515 2 месяца назад

Can you put links to the parts you use on your bike??? This would be super helpful. Good work keep it up!!!!

@garyp9678 2 года назад

Hey man can you make a bike dedicated to wheelies? Wanting to know the best setup and bike for em.

@Mike-hr6jz 2 года назад

If you would reduce the sprocket on the back wheel by 10 or 12 teeth you will definitely do 75 miles an hour but you will need a long distance to get there

@Black66 2 года назад

Check out the CT200U-EX playlist. I have used a 40 sprocket on a few different combos. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@IPREVAIL-pv9rk Год назад

What size sprocket is on the front and rear?

@MrLong6 10 месяцев назад

Hey I’m young and my dad just bought one of these I’m planning on working on it. What’s the first thing I should buy to increase speed but also not be a gas guzzler. Thanks

@pedroarreola9650 2 года назад

Hey Man U did any clearance for the cam and stuff ? Or it all jus fit in

@Black66 2 года назад

The 265 cam dropped right in.

@daltonzucco6931 2 года назад

Non hemi wont need any clearance with a 265, the hemi is hit and miss

@samsgarage1716 2 года назад

You was out.Great job.

@JessePawlak 2 года назад

What clutch do you recommend using with the predator 212 when straight chain? Thanks

@Black66 2 года назад

This is a good one for the #40/41/420 chain www.amazon.com/Bravex-Centrifugal-Clutch-Tooth-Chain/dp/B07HFXHNNY/ref=sr_1_14?crid=2084QFKAMRAQA&keywords=mini+bike+clutch+for+predator+212&qid=1649971577&sprefix=minibike+clutch%2Caps%2C314&sr=8-14

@derekgonzalez3247 2 года назад

If I did this to mine I would go to jail

@MountainEagle77 Месяц назад

Then you need to leave where you live. It’s called tyranny

@sandmanbub 2 года назад

@Whoop!

@joelhernandez6278 Год назад

☺60 mph. Mucho gooooood

@Black66 Год назад

Until you fall off....😳

@bradcarpenter2396 2 года назад

Black66, I think I saw recently where you put a hub on a ct200uex that will allow you to change the sprocket without pulling the axle every time too switch sprockets, what was that hub❓ pls. advise. Thank you. ✌🏻

@Black66 2 года назад

Maybe this was the video you are talking about? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JIHHuNigHy4.html

@bradcarpenter2396 2 года назад

@@Black66 yes this is the one thank you, will it fit a ct200uex or is it different? Where can I find one.? Thank you.

@MotoMaxMX 2 года назад

i swear you have to live in nevada because i recognize that neighborhood

@adariushickmon293 2 года назад

But make sure your throttles turned up and your engine is turned up too so it can go that fast

@unchartedcazaypesca6254 2 года назад

Fantastic videos. Question if I mount DuroMax XP18HP 440cc. Which you think will be the speed on it. And do you think it’s good engine. Do you think will fit COLEMAN CT200U

@Black66 2 года назад

Thanks, Ya, I think it will fit. With all that torque you should be able to put a high gear on it.

@carsoncobia5925 4 месяца назад

Did you built the predator 212 yourself or did you buy one like that.

@Black66 4 месяца назад

Yes check out the playlist for the entire build on this bike and many others. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZTC1ZAkuNdk.html

@Brandenuzis 2 года назад

Got the same mini bike for free and put a cr125 engine on it it’s a monster now

@A.E.Lanman777 Год назад

I have a Coleman bt, with a predator 224, and torque converter, it goes scary fast.

@Black66 Год назад

AWesome!! We have some with the 224. Check out the playlist on the channel. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2GxryXDUkt8.html

@robertlitchford4218 2 года назад

I've gotten 59mph out of a 196cc, no governor and rear sprocket change 👍 cool video man

@ontheflipsideedc 2 года назад

The engine that came on it?

@keithcola9104 2 года назад

Wow!! What was ur set up?

@cesarcabanillas9333 2 года назад

Straight chain? Or jackshaft?

@robertlitchford4218 2 года назад

@@cesarcabanillas9333 its was with a jackshaft at that time

@cesarcabanillas9333 2 года назад

@@robertlitchford4218 man that’s awesome I have header pipe, intake, non regulated clone carb, and governor taken out and I’m only pushing 35 on my top speed did the rear sprocket change make that much of a difference for you?

@robertandreason3218 Год назад

You now have a torque converter and it'll pop a wheelie change your rear sprocket and you'll get your top speed that you want

@Black66 Год назад

Check out the CT200U-EX playlist for many videos with a torque converter and different engine combos. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@RYANINBODEN1547 11 месяцев назад

Why a gx160 head? I have a gx160 me and my buddy just ungoverned and threw on a mega moto 80 frame i had and i was looking for ways to make it go faster and more torque. Other then governor removal, cheap intake carb kit, new clutch and #35 chain its all stock. It seems to have a ton of compression it's incredibly hard to pull but usually starts first pull.

@jenniferj7588 6 месяцев назад

Take the twist gas throttle off and use a break lever on your bikes you get more full throttle than the twist kind ..Or use a thumb throttle your choice but i like the break lever on my bikes I even replace on my scooters too .

@jenniferj7588 6 месяцев назад

For the break lever throttle you can even use one finger ...

@Black66 6 месяцев назад

Check out the CT200U-EX playlist for many combos on this bike ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eHax9KYC0xo.html

@jenniferj7588 6 месяцев назад

Use a bicycle break lever for your gas throttle this is what I meant ...

@JonJong Год назад

Great video. What do you use to get GPS speed and overlay on video?

@Black66 Год назад

Thanks! I use a dragy performance meter for 0 to 30 and digiHUD on the phone for top speed. Camera GoPro software for the overlay, Check out the CT200U-EX playlist for more combos on this bike. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@Ezdrumms 2 года назад

I put a 60t sprocket on the back with the straight chain cuz I wanted to see if that would give me my torque back and for the most part it did, I still have a 10t on the front but I have a 12t just waiting to be put on lol

@Black66 2 года назад

I have a video coming out with the 60 sprocket! It is a rocket ship!

@Ezdrumms 2 года назад

@@Black66 awesome I can’t wait! Subscribed!!

@simonpowell1223 Год назад

did you ever do a video with the predator 212 with a torque converter installed?

@Black66 Год назад

Yes, check out the CT200U-EX playlist for many combos with this bike ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@larryguevara3350 Год назад

It's one of the lightest frame out there. I'm sure that helps

@Black66 Год назад

Yes, it does. Check out my other bike that makes easy work of the CT200U-EX ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-o0UliTSSwWc.html

@heathenprojects2639 2 года назад

I got 55 out of the ducar but was running the 10/53 and I got a few extra pounds got my 228 Tillotson apart tapping the block way to much crank case pressure at 9k rpm so much it blew my rear oil plug out on some test hits

@jeffreygraham4058 2 года назад

So what are the bearings on those rated at I can imagine they're not for that speed I'm just curious if you've upgraded them or not

@Black66 2 года назад

Stock bearings

@theclaytonshow838 5 месяцев назад

Keep them greased lubed up

@tracyazevedo 2 года назад

I want it sooo bad!! 😂

@CHUNKYNUGGET666 2 года назад

It’s quick but not too quick and it flys😂

@Black66 2 года назад

Check out this one ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Up6TpJiopEo.html

@litnlarry 2 года назад

I noticed you put to washers on before clutch. What size were those? Did you put the stock chains together? Or buy a new chain? And what length of chain do I need for it? Sorry for all the questions.

@Black66 2 года назад

They are 3/4 washers. It is stock chain spliced together. If you Use a chain breaker and you can splice any length you need.

@miguelpagansr6128 2 года назад

Nice, I wonder how it would do with a torque converter. Maybe on your next video?

@Black66 2 года назад

Ya, ill have to add one

@WyFoster 2 года назад

I'd guess it'll lose like 5 mph

@mikestevens3506 2 года назад

Probably be a little slower but have much better accel

@danielroach8330 2 года назад

I have the same bike with the stock 212 and torque converter. Mine tops out at 42. The low end pick up is really nice though.

@heathenprojects2639 2 года назад

@UC4CbpFrWUBBXSuUcEDthhzg have a Baja warrior we did a bone stock ducar with tav 30 it runs 49 with 10/50 set up they work great we upgraded the front to a 12 and it's now doing 56 at 5100 rpm

@WilliamWonka 2 года назад

I’m trying to talk myself out of buying this exact same bike, but this isn’t helping.

@Black66 2 года назад

This should help. Check out the CT200U-EX playlist . lol ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@williamhartman9 Год назад

Do you recommend using the straight chain or no ?

@Black66 Год назад

Depends on what your doing with the bike IMO. If you are a light weight rider and only want speed it's ok but you should use a bigger sprocket to be easier on the clutch. If you are using the bike for trailing or hills or are heavier I would use the TAV for sure.

@theclaytonshow838 5 месяцев назад

Got rid of my stock motor wonder what my Tilliston stage one would do with a straight chain

@klankrank187 2 года назад

Put that new ghost motor on it made by preditor its also a 212cc but a straight racing motor

@Black66 2 года назад

I Have Ghost videos coming out on a different bike. Check out the CT200U-EX playlist for many different engines and combos on this bike and others. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@klankrank187 2 года назад

@@Black66 i would like to see what it would do on that bike tho i bet that thing would fly you would at least hit 80 mph no problem

@MrFoot-hc1zv 2 года назад

Was this the normal predator 212cc 6.5 hp or was this the ghost version?

@Black66 2 года назад

This is a normal Predator. Check out the playlist for more combos on this bike. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@bradygainey8043 Год назад

Would the straight chain be ok with hills and dirt also is this a hemi or a non hemi

@Black66 Год назад

No, a straight chain is good for highway use but doesn't work well on hills. This build is a non-hemi. Check out the CT200U-EX playlist for many combos with this bike. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@FnLn55 2 года назад

10t on the clutch, and 50t on the rear wheel ... how tall are the tires? And, how often do you oil the clutch bearing? Thank you Professor Black66!

@Black66 2 года назад

I oil it every other ride or so . I hate getting out there and the bushing runs dry.

@FnLn55 2 года назад

@@Black66 ... I figured it must be routine ... you're testing its limits too ... but don't think I've seen you lube it, yet. Did you ever experiment with different spring weights? Thanks - you make great video.

@bradcarpenter2396 2 года назад

I have the worst time trying to find a 12 or 15 tooth #40 clutch please tell me where I can get one. 👍🏻🤙🏻✌🏻 A friend Brad.

@Black66 2 года назад

Links for the parts are in the description of the video. Thanks for watching!

@loopis12321 2 года назад

Hey Black, I watch all your videos. Can you tell me what muffler you have on this bike? Thanks

@Black66 2 года назад

Thanks! It has a header pipe with a Exhaust Trumpet . Here is the link for the header www.gopowersports.com/header-pipe-coleman-ct200s-mega-moto-212-tillotson-225/

@RoyalJZ 2 года назад

😳

@eugenerios2901 4 месяца назад

can you make my 2023 honda ruckus go 60

@bradcarpenter2396 2 года назад

I have the same bike with a mikuni and header my best speed is 35 mph what do you do different ❓

@lucidbeatsproductionstudio6419 Год назад

Did you remove the governor gear inside the engine?

@Black66 Год назад

Yes. Check out the CT200U-EX playlist. This bike has had many different engines and combos. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@troyholland3436 Год назад

Do u half to change out ur clutch often with the straight chain 50 tooth? Cause usually when I have this set up especially with the 50 tooth my clutch usually goes out with in a month or so

@Black66 Год назад

Mine lasted for a while longer only because I'M light weight. It is definitely better with the 60 tooth for longevity. Check out the CT200U-EX playlist if you haven't already. I have tried many different combos with this bike. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@everybodyk3198 2 года назад

Is the Coleman mini bike like you got automatic

@HOCKMAN1981 2 года назад

Faster than the torch converter kit?

@Geogodoy 2 года назад

I didn't know you can have the clutch wheel face in to have the chain line up

@Black66 2 года назад

Straight chain doesn't line up like the jack shaft does.

@Geogodoy 2 года назад

@@Black66 I tried it last night but I think I have a few extra links to take off cause once I flipped the teeth facing the motor the chain popped off can't have to much slack in the chain I'm assuming

@Lauer3817 Год назад

I have a 212 also and I’m wondering did you eliminate the governor in it or just put a 212 in with a direct chain?

@Black66 Год назад

I have done many engine and gear set ups on this bike. Check out the CT200U-EX playlist ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@xrxckyx9210 2 года назад

Got myself a ct200u ex today and also picked up a 224cc and recommend mods to it such as clutch,intake and header a good start for the 224 ? Did a top speed on the 196cc and I topped at 25mph haha

@Black66 2 года назад

Check out the 224 playist for combos. I really like the 224 with a 265 cam. Video coming out soon.

@Rippinandfishin Год назад

did you have to do anything else to the motor or was it stock

@Black66 Год назад

Check out the CT200U-EX playlist. We have had many different engine combos on this bike. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X0SmAZJ6qW8.html

@Rippinandfishin Год назад

@@Black66 ok thanks

@bfarm44 2 года назад

We needs brakes or better brakes or some brakes🤣

@Black66 2 года назад

Brakes are overrated! 😂👍

@jessiebaker4539 Год назад

Better to straight chain mine or torque converter swap vs originally jockey clutch

@Hammer_Down_Production 4 месяца назад

I just ordered the mini bike. Can i get an EXACT parts list on what you have in yours?

@TheRandomPNW 2 года назад

Are you able to sell the motor that you made because I don’t know how to build it?

@davidpritch718 2 года назад

How are the brakes holding up with the increase in speed?

@Black66 2 года назад

Surprisingly ok, but then again I'm using a lot of road to slow down. It wouldn't hurt to upgrade to a disc or something

@krisk6025 3 месяца назад

What’s the gear ratio on that mini I’m trying to decide on a good #40 chain ratio to run for my mm80 build I was thinking 10-40 it’s just a degoverned 212 with a header pipe vm22 carb billet flywheel and 18lb springs I’ve only ever ran #35 chains and not to sure about what gearing I should try first

@DeborahSanchez-g7c Год назад

I have the exact same bike I wanna buy the 212 tomorrow at harbor freight what else (piping) did you buy

@Rooster_B18C 2 года назад

Do you plug the valve cover breather? I’d rather do that then run a catch can. I was told it can contaminate your oil faster, but if you do frequent oil changes does it matter? What did you plug it with?? Love the vids 👍🏻

@Black66 2 года назад

It doesn't throw oil . I left it open off of the valve cover.

@sean6992 2 года назад

What about a predator v twin 22hp motor?? 🤔

@chan-pk1ei 2 года назад

hey i rode the same bike yesterday but it had enginge swap for race bike and a bunch of mods do you think they are worth buying without parts just taking the governer off?

@Black66 2 года назад

It depends on what you want. Or how fast you want to go. It's worth buying if you can get a good deal. But just a stock engine with the governor removed is fun too.