Coleman Outfitter 400cc UT400 UTV Review 

My wife was complaining about how ours was running rough and bucking. Found out she was not wearing her seat belt. Thanks for solving our problem for us - we were not aware of that issue.

Great review! Same with me, I took a chance on a non-starting unit, put a new spark plug and it purrs. So far I am satisfied!

Have been looking at this UTV lately and your review has convinced me that this would be a good purchase. Thanks for taking the time to produce this video.

Comprehensive review and insight into brands. Thanks! Must have been satisfying to getting it to work after others have failed.

I just received my 2022 Coleman UT400 yesterday and watching your video was really useful. Thank you for taking the time to make such a thorough video.

Thank you so much for doing this video. I purchased the Coleman UTV 400 last month.

I have a 2021 Hisun HS400 we purchased from a Hisun dealer in Hayden, Idaho and it is exactly like this Coleman UT400 feature for feature. Only difference is, ours is camo green. Not a toy. We've been using it on our farm and for hunting. Love the smaller size to get around most places where our 4-wheeler ATV could go... and the smaller price. I've had mine up to 50 mph. Well made, good quality!

I ordered the 400 Hisun today , your video is extremely informative . Thank you from NEW HAMPSHIRE USA 🍻

Thanks for the review!

Thanks, man!! I agree. Ours is good so far. Need to do maintenance but it is so much fun so far. Perfect light weight utv.

Thanks for a great review. I think a lot of people that post bad reviews of many products are due to operator error. This looks like a good machine to me. !:- )

Really Great video!! Just picked a brand new unit up at tractor supply. Used my 10% seasonal discount and took $700 off the machine. Haverhill Massachusetts

Great job thanks for all the information. We just picked one up.

Yes, thanks for the review. I pulled the trigger and purchased one.

Very thorough and intelligent narrative.... keep it up!

Great review well done champ!

Great review!

I’ve had my Coleman UT 400 for just over a year. No problems very reliable. For the first time it ran out of gas. It’s been sitting for a few weeks now .still has not been able to get it started. I contacted Warranty did not realize they only give you a one-year.

Mine just got to 150 miles. I can get 45 mph out of it after a careful break in. Thanks for the clunk tip.

Thank you. Very informative!

Thanks for the video,we pick ours up tomoro

Great video!! Thank you!

Got mine for 4500. 8 hours. Fun's great

Thank you for your video.

I don't need it, I don't need it, I don't need it, I NEEEEEDDDD IIIIIIITTTT!

Great video. Thanks

We have had one for one year! It been 550 mules around the yard....

When towing this bad boy on a trailer the roof will blow off so I highly suggest you put washers over the rubber bushings.

They are a decent priced utv and Tractor Supply Co. stocks them here(upstate NY). I looked at them many times!! However, after talking to a local independent atv/utv/snowmobile repair shop, they said parts/company support are tough to get for Coleman and other "off" brands. They said usually the first year of ownership goes well, then after that, they can be problematic. I personally need a dealer/warranty support system for my first utv. I chose the Honda pioneer 700-4. It was painful to pay $14k for a utv, but I plan on having it for years and years of homestead use...

Wow great find! With all those fancy options, you’d think they would have a big ole dash light or buzzer when the seatbelt is unlatched.

Thanks.for the review trying to decide ?? And confused . .

I have the exact same model and you have to have some knowledge to work on it as it has been decent so far. I did tidy up a lot of wiring to keep it from rubbing against metal and becoming weak due to vibration. I have no clue what type of silencer to put on it that fits as the thing is kind of loud. Now I have my Coleman titled and taged so I can drive it on the local streets here like the golf carts can as I also have turf saver tires on it. When you get ready to change the oil don't force the oil plug.

Really good review. I just bought one and this addressed several things I was wondering about. I can't seem to find what to gap the spark plugs at! The Tractor Supply did a poor job assembling, and not one grease point had been lubed. What spark plugs did you recomnend?

Good vid :-)

Got 4 days ago problems are 1 brake sticking and the shifter. What's the best way to adjust the shifter cable? And the left rear brake sticks a little. Great video I like it so far am going grease it today mine is a Coleman 400

We purchased one of these because of your review, thank you. After we received it we noticed that the fuel indicator light shows Empty even after putting gas in it. I found a tube coming from the top of the what I believe is the fuel pump, that is not connected on both ends. (I am not to knowledgeable about engines) I have been looking for a better manual/assembly instructions that would show what it is for. Wondering if it has to do with the fuel indicator, Not sure if you can help,

Aces review , Thanks

what I pushed with forward range off road through ice wait 14 inches without 4x4 till later down on in the snow. and snow only 24 inches. and It did better than I thought. I just wish they had high and low on it !!! the battery bracket usually ground it out. in the area I live !!! before 800km on it it sucked after that I went from 5600 rpm to 8000 now and from 50km/h to 80 km/h now. I wonder what km/h when the rest unlocks automatically to 10k rpm next !!! mine was bought from new 0.4 km on my clock new !!! same with my 250cc strike new at 180 km/h that can keep up so far !!!

Great video. What sparkplug did you suggest and what is the gap????

Thanks for the video. I too was looking for youtube information on this model. I bought one anyway. I did have a question about the hitch size. I have several .. but none seem to fit. Had to do some grinding and drilling to customize the fit. Still a little wonky.Works ok. I'm still looking for a better solution though.

Did you say a 'grease sert'? I'm sorry for being ignorant--I'm a 54 year old woman who has been legally blind her whole life, and I've never been able to drive. I just bought one of these so I can get around my 5 acres. I have enough eyesight to drive it safely on our flat land. I really needed that dump bed for tree limbs and yard trash. I'm also recovering from Achilles Tendon/heel bone removal surgery, a long 1.5 year recovery, still dealing with pain and swelling and I have a huge yard to take care of. Hopefully this UTV is going to make my life a lot easier! I came here on YT to find videos about this model, so learn how to do maintenance. I'm not sure what a grease sert is? How do I find them? My UTV was bought new, already assembled at Tractor Supply. I got the Black Friday deal, $2,000 off. Seems to be running well, but it has less than 4 miles on it, and it just came today, so I'm learning how to use it. Any advice is appreciated! I'm really excited to finally be able to drive something around for the first time. I learned quite a few things from you, so thank you so much for this video! I'm off to give it a go now!

Thanks for the video, may I ask how has it held up thus far, any further issues that have cropped up besides the ones you mentioned in this video & the Coleman 400 is fairly new to you so I was hoping you could make a follow-up video in about 6 months to a year & happy New Year.

Thank you for the video. It looks like there is a "check engine" light on the dash. Does this also have an OBDII port like car or truck?

Interesting

Nice video, how about an update? My Tractor supply has one, they want 9 k for it. How’s it holding up? Thanks

What about the CVT belt? Longevity of belt and where to purchase a replacement belt? Access to belt....easy to access?? Where are parts sold in Canada as I am currently cross referencing. Thanks

I can tell you from experience, if you don’t let the engine run and warm up and if you turn it on and drive it for a short distance and turn it off. When you check your oil, it will look like there’s water in the oil. I can guarantee it. Do what the manual says and definitely let it warm up and run for a while every single time you run it.

Due for my first oil change and there is controversy on whether or not to use conventional or full synthetic oil. The manual doesn't specify which and someone mentioned to me that full synthetic oil can cause clutch slippage. Any recommendations?

I bought one of these a few months ago and have been very happy with it. I just ordered a snowplow for it yesterday and am curious if anyone has plowed with theirs and how did it perform. I'm planning on putting a few hundred pounds of sand in the back for added weight/traction but not sure if I should buy a set of chains? Any feedback will be appreciated. Thanks.

That was a Good Solid rundown you did there..!! Yes, there are about 7-9 companies that use the Hyson brand and put their own names on them. We have the Massimo Buck 400 (a 392cc engine) that we got Straight from their facility in Texas for less than Tractor supply, even though there is one 17 miles from home. Massimo shipped it to my door several states away just for the low Low purchase price of 5,995 $ US... (plus Tax of course) they were on sale the first of 2020. Also they came in 7 different colors AND Everything and More to make it street legal IF a state was so inclined to do so,. To get a unit like this (and they are Very Sturdily built too) from ANY of the “name brand” companies it would cost between $ 15,000 - 25,000 dollars 💵 so we consider these a Very GOOD deal...!! 😎👍✅ Read more

Tractor Supply sales them in America the one I got was missing the right side tailgate latch so yes thus far I haven't been able to drop open the tailgate also it looks as if yours has different tires than mine the one Tractor Supply sales has WANDA brand tires that are 25x8.00-12 Tires

Status update please. I just bought mine today.

Not sure how yours drives, but I have a 2021 UT400 and it seems to me that I have to give it a bit more gas then needed to get it to start moving and when it does, it seems to be holding back until it starts off. Then when it does, it's a little jerky, then when it starts moving along, it seems to ride better. I have nothing to compare this with to to see whether or not this is normal. Any recommendations?

Why is one front wheels turned different than the other? Out of alignment?

Think it would plow snow ?

Did you say 38 mph? If thats true I'll get 1 i was looking at the kubota diesel. We have the kubotas at work and top out at 17mph

Could you tell me where all the grease zerks are? I’ve had mine for awhile and have not greased it yet. Need to get it done. Thanks. I’ve really enjoyed mine. Had to repair a few things but got it for a price I couldn’t pass up. Just hitting 2000 miles.

take the governor off it to go faster

Where in the world is the fuse box?

Those who complain about a "lack of gaskets" are actually displaying their ignorance; not to imply that the reviewer is doing any but rightfully and questionably making note of "conventional wisdom"; (something more often wrong than right). The purpose and need for gaskets (or any sealant) is to "make up" for imperfections in the mechanical fit-up of components; typically two or more piece cases intended to contain fluid lubricants, etc. If the mechanical fit were perfect neither gaskets nor sealants would be necessary to seal such components. Additionally, gaskets introduce flexible junctures between case components, with the thicker the gasket(s) the more potential for relative movement. That an assembly can be made tight without the need for a gasket indicates a higher level of accuracy in the machining of that assembly's mating surfaces; and a higher level of precision in working tolerances of internal components as the inherent variability of each gasket's thickness resulting from compression during assembly does not have to be compensated for via intentionally "sloppy" fitment. Truly precision assemblies rarely employ gaskets (especially "rubber" gaskets)--with the presence of same actually being an indication of, and compensation for, less precise machining...

What size is new spark plug you installed iridium

How do u switch from 4x4 to 2 wheel drive I try to switch it and now it make a noise

Is there anyway you can disable the seatbelt feature?

Do I see blue smoke?

I have a new one and it had a problem with going into the reverse and jumping out in forward gear

My winch on my Brand New Outfitter 400 does not seem to work… it is only a couple weeks old… anyone have any ideas on what may be wrong?

I was reading the manual to learn how to check the oil level and the manual says to remove the console but it doesn’t show HOW TO remove the console. Could you do a video to show this. Again thanks for this video.

how much is the fuel consumption

Do oil change already

Has anyone done a motor swap to a bigger motor just yet? On one of these Hisun 400's

Is the rear diff unlocked when in 2wd mode? My folks are looking at one, but don't want to tear up the gravel or lawn too much in the summer when just doing yard work

Looks and sounds like it barely has enough power to even get moving. Have you towed with it?

what doesn't companies put a decent muffler on utv's not one you can hear a mile away ?

Can you please get a Coleman ut250 utv?

Mine make a loud noise like if the breaks are on but there not

Do you know what snow plow might fit on this?

A beefed-up golf cart for $10,00 Thats all I need. I don't need A $25,000+ Polaris or Cam-am

The manual does not show how to use the WINCH... I have never had a winch on a side by side, and hoped someone could tell me how to operate the winch????? Thanks.

Put the seat belt behind your back just clip it together right. Don’t need the belt

Want to know what gas are you using?

What’s weight limit for winch?

If only it came with a proper manual transmission

What's the difference between HISUN and outfitter Coleman 400

I WANT ONE ☝️!!

Mine came with instructions only in Chinese

My biggest issue with coleman brand atvs is their refusal to stand. Ehind their warranties and products. And their warranties are terrible compared to other brands.

Remove governor and it will go to 55 easy

Bought an $8K rig and did $10K damage to his yard.

Let me guess, you paid $4500 for it?

7000 for a kids toy that does 38 mph does not seem worth it!