Took mine off because both sides were lifting tapes being visible and gaps are horrendous. I still want to re install because I really like the look but I want to know what is the best adhesive for it to keep in flush on both side or any tips for proper fit and adhesion. Thanks fellow vb owners!👊🏾🍻
I found at least 3 flaws with GoPro battery door, uploaded it yesterday. The problem persists with 9,10,11 and 12. There is a reason it leaks, or at least 3 and they are due to poor design of the seal on the battery door!
what I pushed with forward range off road through ice wait 14 inches without 4x4 till later down on in the snow. and snow only 24 inches. and It did better than I thought. I just wish they had high and low on it !!! the battery bracket usually ground it out. in the area I live !!! before 800km on it it sucked after that I went from 5600 rpm to 8000 now and from 50km/h to 80 km/h now. I wonder what km/h when the rest unlocks automatically to 10k rpm next !!! mine was bought from new 0.4 km on my clock new !!! same with my 250cc strike new at 180 km/h that can keep up so far !!!
Every material has some amount of shrink and expansion when exposed to cold and heat which is why no car has perfect body gaps if it did then as soon as as it warmed up doors and hoods would not open they'd be sealed there has to be a happy medium with taped on parts the glue is softer when heated to becomes pliable and stretches so bolt on with tape and a seal and letting cure in proper temperature with weight on it will often prevent most of these issues not all but most
Due for my first oil change and there is controversy on whether or not to use conventional or full synthetic oil. The manual doesn't specify which and someone mentioned to me that full synthetic oil can cause clutch slippage. Any recommendations?
Hello, I greet you from Mexico and I have the same problem as many here, my Hero 5 does not work telemetry, the GPS icon is on on my camera, but when recording video, Windows Quick App tells me that I have to activate first and I don't understand why this happens to me, I use the "Telemetry Extractor" software and I realize that the video was recorded with Telemetry data and everything is fine, but when trying to do it with the original GoPro software It doesn't work for me. I am very disappointed in the brand, I have been a user of these cameras for more than 15 years and now I will look for another better option, perhaps the Garmin Virb can help me.
Not sure if it's the same issue, but I just flew my mini3 Pro for about 6 flawless flights at -12C, then brought it home and flew it around my house and the 3rd flight suddenly gave me "gimbal motor overload" errors and there was a whole lot of jerking and jiggling (not quite what I'd call jello effect). Strange that I'd get this after flying a lot in cold weather under the same pre-flight and flight conditions and with no errors or jiggly footage.
Interested to see how this progress and if they are going to redesign. I got me one and about to install. Thinking of adding tape all throughout that corner. Seeing this now with temperature changes, might stack some tape too for about 4" or so (maybe...). Hoping these will help out, especially with colder temps coming up. Good job on noting this issue and sharing! Wondering if a liquid adhesive install would eliminate this issue, and if so which would be the best one.
So I just installed mine today and I put 4 extra strips wide (3M tape) on the corners to make sure it sticks. I noticed with a dry fit it doesn't appear to fit flush 100%, it has some rocker between corners to middle-back near the emblem. I was extremely tedious with trying dry fit and getting best flush fit and it just doesn't fit perfectly, in my opinion it is a design flaw. I ended up stacking 3 pieces of 3M tape on the middle-back near the emblem to try to fill the gap to keep the corners sticking down and flush. I also opted not to install the bolts as that would amplify the issue. With this not fitting 100% flush, plus temperature changes when forcing pieces down it definitely will pop up with hot days and cold nights. If I would install again, for 3M tape I would stack 4 strips on the middle-back OR what I will probably re-do is install with a liquid adhesive (like Betalink or 3M Urethane Windshield Adhesive). Also heard many people with other spoilers fill gaps with 3M Windshield Adhesive. Just posting this if it helps anyone else out with fitment issues.
Not sure how yours drives, but I have a 2021 UT400 and it seems to me that I have to give it a bit more gas then needed to get it to start moving and when it does, it seems to be holding back until it starts off. Then when it does, it's a little jerky, then when it starts moving along, it seems to ride better. I have nothing to compare this with to to see whether or not this is normal. Any recommendations?
I installed three times using three different brand adhesives with primer. Last two times I didn’t line up the holes n use the screws. To give it the flattest fit possible. The tabs lifted. I took it off. Very frustrating.
I can tell you from experience, if you don’t let the engine run and warm up and if you turn it on and drive it for a short distance and turn it off. When you check your oil, it will look like there’s water in the oil. I can guarantee it. Do what the manual says and definitely let it warm up and run for a while every single time you run it.
GPS and telemetery not working right? Of course, this is the GoPro experience! The Hero 7 Black can't even reliably shut off, so I pull the battery after every video. When it's time to shoot another video I re-install the battery and turn it on to let it sniff for satellites and eventually I get the location icon. Yay, time to record! But the yay turns to wtf when reviewing the videos in Quik as it becomes painfully obvious the GPS and telemetry data work for a short time but soon become frozen or completely disconnected from what's really happening. I'd love to hear GoPro's excuse for this steaming hot failure. My free GPS phone apps never suck at this level.
Procurei aqui no Brasil e só encontrei teste com essa pulseira feito na piscina... Acredito que isso realmente deve funcionar e salvar vidas. Obrigado 😉🇧🇷
I use this process and the GPS speed reading is incorrect. I was driving at 45mph and the telemetrics was showing 70mph. I am losing patience with this device
Tractor Supply sales them in America the one I got was missing the right side tailgate latch so yes thus far I haven't been able to drop open the tailgate also it looks as if yours has different tires than mine the one Tractor Supply sales has WANDA brand tires that are 25x8.00-12 Tires
I have a 2021 Hisun HS400 we purchased from a Hisun dealer in Hayden, Idaho and it is exactly like this Coleman UT400 feature for feature. Only difference is, ours is camo green. Not a toy. We've been using it on our farm and for hunting. Love the smaller size to get around most places where our 4-wheeler ATV could go... and the smaller price. I've had mine up to 50 mph. Well made, good quality!