Colin Furze Helped me test my TANK

Подписаться 1,2 млн

Просмотров 458 тыс.

50% 1

AD: Go to: pvcase.com/JamesBruton try PVcase for free!
Do you remember when Colin Furze built the Rhino tank and then got stuck in a ditch and had to pull it out with a JCB?
The concept was pioneered by Elie Aghnides on the 1950s. The idea being that due to the domed-shaped wheels, the more your sink into mud, the more grip it has.
Colin Furze converted a dumper truck to build his version of the Rhino, but it originally had much smaller wheels. The motors are hydraulic, but there wasn’t enough torque to turn the bigger diameter wheels when it was really needed due to the increased leverage.
My plan is to make a slightly smaller version, and it’ll be electric, and I’ll try to get a large reduction from the motors to the wheels so I can get more relative torque. I’m also going to have a servo controlled camber angle so it can transform.
CAD & Code: github.com/XRobots/Rhino
@colinfurze Videos:
• This 1950's ATV Concept ?
• 1950's ATV Concept Bui...
• My First FAILURE!!
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: / discord
Patreon: / xrobots
Merchandise: teespring.com/stores/james-br...
***************************
Other socials:
***************************
Instagram: / xrobotsuk
Twitter: / xrobotsuk
Facebook: / xrobotsuk
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at www.3dfuel.com/XROBOTS - use code XROBOTS at the cart screen.
Music for your RU-vid videos: share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: www.3dfuel.com/
Lulzbot 3D Printers: bit.ly/2Sj6nil
Bearings from: simplybearings.co.uk/
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: bit.ly/2RhArcD
3D Printer Filament: bit.ly/2PdcdUu
Soldering Iron: bit.ly/2DrNWDR
Vectric CNC Software: bit.ly/2zxpZqv
CAD content is sponsored by Autodesk Fusion 360

Наука

Опубликовано:

17 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 763

@colinfurze 2 месяца назад

Ity's great to see some ones else's interpretation of this concept, i'm sure between the 2 theres a semi functial vehicle, well done James.

@jamesbruton 2 месяца назад

Thanks for helping out with the video and testing!

@jaxsonsimpson-harris3113 2 месяца назад

You two should work together on a Version 2 of Colin's Riono Tank and use the best of both to make something that's unstoppable, also maybe get a more powerful motor like a little diesel engine that has a load of torque.

@lukefrahn8538 2 месяца назад

Isn't it a requirement to have wheels that float?

@DetroitMicroSound 2 месяца назад

Have either of you guys considered an ArcDroid for your shop yet? I bet they would sponsor you in a heartbeat! Great units, and can expand your shop's capabilities a lot. You're welcome. 😉

@DMSparky 2 месяца назад

Thanks for participating in the video!

@Autonate_42 2 месяца назад

"I have learned from your mistakes Colin and repeated them exactly" had me laughing, love these two together.

@kingmasterlord 2 месяца назад

like a peanut butter hamburger helper sandwich

@FMFvideos 2 месяца назад

when did he say that? I can't find

@misconstrudel 2 месяца назад

@@FMFvideos 17:39

@AzaanaMeanrlyth 2 месяца назад

This video has so much englishman in a shed showing off his latest toy to another shed living englishman energy, and I love it.

@eTiMaGo 2 месяца назад

pretty good summary of all British engineering really :D

@pileofstuff 2 месяца назад

in the words of James May : "blokes mucking about in sheds is what made this country great"

@pcka12 Месяц назад

@@eTiMaGoincluding HMS Dreadnought 1906?

@Ugly_German_Truths 5 дней назад

But i thought Colin lived in a house shaped Country tea storage facility and only WORKS in a Shed...

@DeclanMBrennan 2 месяца назад

In terms of aesthetics, Colin's is "Mad Max battlefield robust", whereas James's is more of a slimmed down "planetary explorer" vibe.

@eTiMaGo 2 месяца назад

which kinda syncs with their personalities too :D

@scottbotgo4218 2 месяца назад

People build their personalities@@eTiMaGo

@eTiMaGo 2 месяца назад

@@scottbotgo4218 everything I build is an unstable mess, that makes sense 😂

@DeclanMBrennan 2 месяца назад

@@eTiMaGo LOL

@matthewmccalister5594 2 месяца назад

He's the quiet genius behind the operation... And Colin is the mad scientist blowing shit up :D (in the absolute best way possible) I want to see more collabs! James making a robotic version of the flying bike?! Or a 3-D printed knife skirt??!

@sunset7860 2 месяца назад

The rust and weathering on the Rhino has only gone and increased it's awesomeness. 👌

@CoolAsFreya 2 месяца назад

Jame's 3D printer, filament, and bearings sponsors are the only kind of RU-vid sponsorships I don't skip, he's actually using their products in all his projects and the ad reads are short and succinct!

@blaaeeke 2 месяца назад

Thats because they arent ads, its just him mentioning his affiliate link

@Vok250 2 месяца назад

And we actually get to see the products at work!

@MrRedstoner 2 месяца назад

There are other channels which do similar things. For one I'll mention Blondihacks, some of her tools are given to her, but we see her use them and even abuse them from time to time.

@teresashinkansen9402 2 месяца назад

I heard he uses up about 5% of the worlds filament, also he had to have installed his personal substation to power all the 3D printers.

@goosenotmaverick1156 2 месяца назад

@@teresashinkansen9402 that's a lot of juice lol We did a couple Bitcoin mining setups. Normal home service (in the US, 200a service) can provide power sufficient for roughly 25 antminer S9s (which I'm sure are likely ancient by now, we did this a few years ago, and that stuff progresses fast) but 25 was the limit for continuous use in a safe manner. Just for a fun side note about the power requirements.

@Scanlaid 2 месяца назад

You two together give me some Jamie and Adam vibes. You guys need to collab on some engineering monstrosity now! Pull some ideas out of a hat, a big animatronic steel head

@CalebHansonlets 2 месяца назад

Jamie and Adam ended up basically hating eachother. They never really got along

@runed0s86 2 месяца назад

Why stop at the head? They should go full gundam!

@vljYWOK 2 месяца назад

They already did a colab. Check out the Ironman suit on Colin's channel and there is a video on burtons about his contribution.

@MrRedstoner 2 месяца назад

@@CalebHansonlets Not hating each other. They respect each other professionally but are not friends

@tylerpoore97 2 месяца назад

@@MrRedstonerWas just gonna say that was a bit sensationalistic.

@TheMeditron 2 месяца назад

Got all nervous watching those expensive electronics going into the bog! Still really cool project and always great to see you two collabing.

@homedad3324 2 месяца назад

James + Colin = brilliant dream team. SO SATISFIED!!!!!!!

@hansdietrich1496 2 месяца назад

I guess one problem is, that on the wheels, even when spread out, you have a lot of ground pressure on the "bars". Only one bar at a time is touching the ground. I'd try some kind of net or fixed track in between those bars. Like on some tractors, designed for low pressure on the ground.

@geesehoward700 2 месяца назад

dont tanks have tracks not wheels?

@hansdietrich1496 2 месяца назад

@@geesehoward700Yes. I don't talk about putting tracks covering the distance between the wheels, I mean the track covering the big gaps ON the wheel.

@poopbutt238 2 месяца назад

Could also put something inflatable in the gaps, like rubber bladders with about 10psi in them.

@hansdietrich1496 2 месяца назад

@@poopbutt238True, but they'd also need grip on the outside. So putting a net all around each wheel would make sense.

@stephensaines7100 2 месяца назад

I agree with your observation, but not how to address it. Even simple 'teeth' added to the wheel webs/struts to all but the non-cambered driving edges would work wonders. What might happen with webbing is the web actually exacerbating the slip by getting caught in the surface it runs on. On smooth asphalt/concrete, I could see it adding traction. On soil, it could snag very easily.

@MattFowlerBTR 2 месяца назад

"Upgrade: Old bugs out, new bugs in". This is definitely an upgrade over Colin's :D

@TheRealAlpha2 2 месяца назад

Such a power coupling. Even if it was a "failure" it's still fun seeing you two work together.

@MrPeachUK 2 месяца назад

"I've learned from your mistakes Colin and repeated them exactly!" 😂

@slippydouglas 2 месяца назад

I love how low-key the last quarter of this is. Two inventors having fun with their inventions in a muddy ravine.

@ryanohoro3764 2 месяца назад

The most impressive thing about James's work is that all of his 3D printed and CNC'd parts fit together so well

@Marc42 2 месяца назад

Furze music, too? 🤘

@stevefrancis4949 2 месяца назад

Teeth on the edges

@SP4CEBAR 2 месяца назад

I like that James is so experienced that he can make devices like this relatively quickly

@TheDevilWAH 2 месяца назад

I remember James starting out, his channel really shows how as you gain experince by trying and failing, your skills develope quickly. I often notice him now almost skipping over parts of the project as though they are to "simple" to be worth mentioning, that in a past project he struggles to undersand and get it working. James understanding of kinematics is a good example of this, it consistently developed over the years with each project untill it has become another tool in his belt.

@therealchriscunningham 2 месяца назад

Incredible Robot Wars vibes from some of this, especially the ditch bits where the availability of a 14-year-old who could remember to invert the controls when reversing might have saved the day.

@Induku 2 месяца назад

I usually watch these videos because of the relaxing nature but this one had me on the edge of my seat!

@Eidolon1andOnly 2 месяца назад

Dome the wheels and fill in the hollow space with spray foam insulation. It'll add byuoancy, there'll be no empty void that'll fill with water in need of draining, and prevent the paddles from digging down into the water and mud.

@jamesjacoby 2 месяца назад

Pretty soon we’ll loop back around to inflatable rubber tires 😂

@ColinWatters 2 месяца назад

+1 I thought the whole idea was to use the wheels as floats.

@Onio_Saiyan 2 месяца назад

I like seeing two makers with different skill sets try to make the same or similar things. This scratched that itch wonderfully.

@westoncraig 2 месяца назад

the design work involved..superb! well done on your continued excellent projects

@YellowPinkie 2 месяца назад

As proof of concept that’s brilliant. Some steering authority and waterproofing (splashing will always be a risk) and that would be a workable solution.

@steveparkes 2 месяца назад

I always enjoy it when you're with other content creators. That look you gave Colin while in the water towards the end reminded me of starting the pulse jet all those years ago. I know how hard it must be for the stars to align to film this sort of episode but they are worth the wait. One of these a year is an absolute treat :)

@tomthebadasscat 2 месяца назад

Very clever and I hope you and Colin had a fun day! ⭐👍

@adadinthelifeofacyclist 2 месяца назад

The circumference of your wheels is different across the width of the tyre, effectively giving a different circumferential speed across the tyre's width. So you automatically lose any static friction and the faster- and slower-moving parts of the circumference will be pushing against each other. There won't be any linear propulsion from a completely submerged wheel unless it is on the bottom. It's beautiful 😃

@ExiledSenpai 2 месяца назад

I would like a video where you try to iterate upon this design and improve it. You could: -Add steering -Put a limiter on the roll -Space the front and back a little further apart so the wheels don't hit each other on a tight turn -Add some buoyancy so it can work like a paddle boat (but don't forget to distribute the weight properly so it doesn't tip) -Anything else a civilian such as my self didn't think of

@goosenotmaverick1156 2 месяца назад

Some filler in the wheels to spread out ground pressure would be helpful in the mud and grass,

@ExiledSenpai 2 месяца назад

@@goosenotmaverick1156Even better if that filler is a highly buoyant material; perhaps some sort of foam.

@davidbenton5393 Месяц назад

Oh and you should lower the cg and make it heavier that should help with the slippage some

@mhenlopotter1612 2 месяца назад

Keep in mind this "Rhino" is only model size! If it was big enough to house a driver, it could effectively take on rocks (and water depth) 2-4 times bigger. Think of it this way: A normal curb is about the height you can expect a normal car to drive up. But a small RC car obviously can't do it. Whereas a huge minig truck can easily go over a much larger boulder. So it's not really a fair comparison when you give the same challenge to two "Rhinos" of different size. With active steering and full-size, I reckon it would do splendidly!

@SP4CEBAR 2 месяца назад

I like Collin's playground: he has a casual swing and a humongous anti-gravity machine

@ATLaboratory 2 месяца назад

Great video and project as alwys!! Thank you James:)

@KadeStringer2.0 2 месяца назад

Good work dude

@gizelle-s 2 месяца назад

I'd love to see this run with an actuator for steering. I feel like that was it's biggest weakness

@c.harris7823 2 месяца назад

James, this project was one of the best exercises in experimental locomotion I've seen you do. I'm sure you learned a great deal, especially after comparing this scaled version to Colin's Rhino. Well done!

@jonkf7548 2 месяца назад

Let's just appreciate that Colin could have just hidden in his tunnels and ignored James or he could have just done the typical RU-vidr half-arsed cross promotion but instead he went out into the cold, muddy fields with James and did all the unglamourous behind the camera work without taking over the video. Legend.

@Slye_Fox 2 месяца назад

My suggestion would be to fill the wheels like Collin did, but slightly deeper and using a mesh instead of a solid plate. Setting them sunk in a bit more will keep the grip your getting from the edging, but also add in some extra in the softer mud without the wheels basically tuning into shovels. And using the mesh keeps them from filling with water and reduces the weight.

@JulienVanier 2 месяца назад

This looked like phenomenally good fun!

@djmips 2 месяца назад

Lovely team-up and the unit worked well. First time full success is hard to come by! We'd all be kicking ourselves - why didn't I follow through with the idea to put in some kind of mid-pivot steering! But hey, ver 1.1 ! Nice work.

@jac2206 2 месяца назад

I love your colaborations with colin

@alfonsoPina 2 месяца назад

you and Colin need to do some more collabs. You guys are awesome!!

@SLAVKINGRED 2 месяца назад

Love your video. This is awesome

@MatchaBarnes 2 месяца назад

VERY cool to see your take on a similar design.

@nadnerb2k 2 месяца назад

This is the most James Bruton Colin Furze project ever!! Or is it the most Colin Furze James Bruton project? The linear actuating camber is inspired 😊

@Trolly- 2 месяца назад

Great video!! I'd like to see this again with more improvements

@bananas401k 2 месяца назад

that looks great! hopefully this convinces more people to make tanks like this

@x9x9x9x9x9 2 месяца назад

I love colin, he always seems so willing to help people.

@garryclelland4481 2 месяца назад

Testing at the Lamb & Furze proving grounds , love it , thanks JB

@AndrewWorkshop 2 месяца назад

Fantastic video!

@kameljoe21 2 месяца назад

Pretty cool. Nearly got stuck there at the end!

@cladael4407 2 месяца назад

Oh man! You guys should collab more!! This was very fun!

@freddykoopmans6985 2 месяца назад

nice to see that Colin showed up !!i I deprecate that. good luck on the project

@vell0cet517 2 месяца назад

The music was a nice touch!

@alexcrouse 2 месяца назад

Colin is just objectively a great guy and i love it!

@BennettKanuka 2 месяца назад

Great video! You can see that theres some potential here with a some revisions. I think you 2 really compliment each other

@nunyabusiness9043NunyaBiz 2 месяца назад

I know you probably get this all the time, but I am envious of your genius. Oh, a rhyme in one line!

@jonsommet 2 месяца назад

I love these two together.

@fred-9929 2 месяца назад

Love to see it again with an active steering mecanism! I'm sure it will be amazing.

@moletrap2640 2 месяца назад

Great collab!

@deeiks12 2 месяца назад

What an awesome collab. You'd make a great team.

@I.no.ah.guy57 2 месяца назад

This was a great vid. Great build, and the actuators to change the camber was awesome, and even better watching you guys have some fun driving it in the mud and stuff! Id love to see you BOTH work on this design and make a better one! Possibly? 😅❤🙏🏼

@johnbuyers8095 2 месяца назад

With slightly better controlled steering and a little more weight to give bite, I reckon you have a pretty good design. Big ups for having Colin come to give an assessment, calling on the king of badgers to review your work is the mark of success

@caardappel 2 месяца назад

Coolest collab in the RU-vid maker community!

@bastelbudi 2 месяца назад

2 big brainers coming together. i like that. we need more content from you both

@danoconnell1833 2 месяца назад

Really fun watching the two of them together, plus some real nail-biting footage there! Will it make it? Will it drown? OH NO! Oh, whew...

@nickavv 2 месяца назад

Love the Colin Furze-esque music choices!

@FranckEhret 2 месяца назад

Colin's tank looks so cool with all this rust! 🙂

@michaeldemetriou1399 2 месяца назад

Well done James that was not bad at all.

@Private-GtngxNMBKvYzXyPq 2 месяца назад

Steering and waterproofing. I would really like to see another collaboration making a revised version with lessons learned.

@TheWoodgineer 2 месяца назад

Awesome build bud - and nobody was injured! :D

@nonesocruel 2 месяца назад

We need this collab more often❤❤❤❤

@Weaseltube 2 месяца назад

Seems to me it would be much more effective with the dish of the wheels facing inside instead of out, to ensure a wider track and more stability. Especially as camber is added, it would lower the frame instead of raising it. But also controlled steer angle looks to be needed. Looking forward to version 2!

@funkyjohnno2 2 месяца назад

needs a diff lock lol. great Job James.

@tempacc9589 2 месяца назад

Nice combo

@memejeff Месяц назад

Very fun journey

@Mr.Kim.T 2 месяца назад

In relation to its smaller size, all those obstacles were massive! I think it did remarkably well. 👍

@JustGoAndFly 2 месяца назад

Cool to see this collab you deserve the notoriety James, one of the most productive makers in RU-vid and some of the most well made videos.

@ElliotJokelson Месяц назад

I would love to know the make and model of the actuated hydraulic? I've been looking for something like that to replace the hydraulic in the foot powered scissor lift table I use in my workshop in order to control it remotely. Thnx!

@TheDevilWAH 2 месяца назад

Like other have said love to see more colabrations between these two. one is angle grinders and sledge hammers, and the other is 3D printers and soldering iorn. Its great fun seeing them togather and i bet they could build an awsome project. Remeber Colin building that huge AT-AT, now think about James getting to do the robotics on it..... We all want to see that don't we?!

@paul_devo 2 месяца назад

Awesome project. How come you didn’t put an actuator to pivot the front and rear half for steering?

@benholroyd5221 2 месяца назад

So when should we expect the cellar extension?

@TruMaverick 3 дня назад

Cool combo

@ashngoyuchiha215 2 месяца назад

when it in rhino mode, the hole in the beam make a little sad face xD

@alanhowse9213 2 месяца назад

More really great work it’s inspiring to see ideas been worked out looked at reimagined I’d like to see a six wheeled version with slightly bigger spacing between the wheels of Jameses version And smaller wheels on a dumper truck conversion to get over the underpowering really good program

@ToddTalksTech 2 месяца назад

Furniture studs in the wheel ribs for a little badger claw traction when required!

@proaudiorestore8926 2 месяца назад

I would say that’s a result! It honestly faired way better than I expected

@JessWLStuart 2 месяца назад

True engineers both make and break cool stuff!

@Vok250 2 месяца назад

Engineers when you tell them not to reinvent the wheel:

@mikejurkowski 2 месяца назад

I think you two are my favorite unexpected duo

@JCWren 2 месяца назад

Besides the active steering, I'd think that adding some serrated metal edging to the wheels would help with grip. The rubber strips protect the plywood edging, but actually reduce grip on slippery surfaces. I envision the rubber strips staying there, and the serrated edges hanging over them.

@peterjmason1980 2 месяца назад

Would it be possible to add some form of diff/axle lock by synchronising all the motors to always drive even if one has lost traction similar to what is implemented on off road vehicles?

@mrjed 2 месяца назад

Super cool. I think American 4x4 truck tires would be a good fix for the terrain; considering lots of vehicles get stuck in the wet English mud. They always put studs or chains around them especially in the winter if its deep enough freezing for the area. I think the loss of grip is mostly a tire tread issue.

@anthonywilliams379 2 месяца назад

shape wise the convex shape if anything causes a loss of grip on harder ground, it has to sink in to grip, perhaps make something like a frame that is designed to flex and crumple by a small amount to maximise contact, like letting the air out of tyres to increase grip

@aidengreenaway-hooper2755 2 месяца назад

This show grate potential

@axelSixtySix 2 месяца назад

Nice mud mixer 👍

@nicholascrow8133 2 месяца назад

Now for a part three they should build one together, James's robotics know how and Colin's metal fab skills. Make a rideable one with the best chance of working!

@P8FPV 2 месяца назад

Cool stuff

@Malidictus 2 месяца назад

Could you run the wheels on either side in opposite directions to combat the wheel slippage?

@001snapshot 2 месяца назад

Suggested inprovments....Retractable spikes on a cam when activated they only extent at bottom of wheel travel....then also allow the right and left side wheels to turn independent...ie....left side reverse while right side foward and visa versa...like a tenk....

@JT-tz5hp 2 месяца назад

Floating wheels! Powerful active steering!

@SpkApeiron 2 месяца назад

I think I won't rebuild from scratch using what you shared. However, the CAD and Codes sections you shared are very beneficial for community development and us. Therefore, I am grateful for your open-source contributions and for helping both us and your own development!!!