Great video but it leaves two questions: 1. does it matter if ink limit is set after or before density linearisation? 2. at the end of the video in print env. settings you display the embedded icc profile without ink limit set on the print env. Is that the correct setting? So we set the ink limit in ICC but not in the print env.?
Thank you, @timijanoirgano, for your feedback. We put a couple of pointers together for you: 1. No, it does not matter. In general, the ink limit has no effect on the density linearization. While the linearization focuses on each color, the ink limit controls the limit for when using more than one color. 2. Yes, the setting in the video is reasonable. However, different configurations can make sense depending on the application/goal. The ink limit set in the ICC is used when a color-managed (via ICC profile) workflow is used. The ICC in the print environment is generally applied when a direct conversion (e.g., CMYK to CMYK) is used. For more details, we suggest you visit doc.ergosoft.net or helpcenter.ergosoft.net to get in touch with our technical expert team. Thanks again & Happy printing, Team Ergosoft
Hi @johnnysikaffy3594 Yes, Ergosoft RIP enables you to create multi-color profiles using fluorescent inks as additional colors. You can define your custom ink setup in the PrintEnvironment under Printing Ink Assignment. For more details, we suggest you visit doc.ergosoft.net or helpcenter.ergosoft.net to get in touch with our technical expert team. Thanks & Happy printing, Team Ergosoft