COMBINATION SWITCH OF THE CAR EXPLAINED | TUTORIAL | DEMONSTRATION ON HOW IT WORKS 

Thank you for all the work with so clear demonstration. I try to find the reason why Turn Signals (and Marking bulbs) stopped working. Hazards and everything else works. The fuse on Turn is good. I'm planning to replace the Headlights Switch, I've heard it might be worn wires on Turns. It is much easier to do diagnostic on the problem after this film. Thank you again. Update 1: I found it!! And what it was, I removed the headliner board for re[placing the upholstery on it, and disconnected the wire to the ceiling lens. The shop manual (I fortunately have for that car 2001 Saturn SL2) advised to attach those wires w/scotch tape, so I disconnected it fm/the plug by the rear window. The plug was sitting on a thin plate, which I assumed was there for keeping the plug in correct place. After I did some research I've learned that grounding could cause Turning Signals go off. The Manual showed 2 grounding wires on the rear close to that plug. There was a clip on the plug, metal one. I disconnected the grounding there, so even w/plug in the T S-ls didn't work of course. It might be helpful for someone else. Pls check the grounding as well if you have a problem w/T Signals and the fuse is fine. I was about to replace the Steering Column Switch, and actually ordered one already (so will have a spare now, not bad thing though). Update 2: Now everything is working w/that clip off or on, so it was not the ground connection, just a mounting clip. I'm completely lost and don't know what was the problem before. Maybe still the Steering Column Switch. The car was sitting for a long time, probably smth got corroded inside of that Switch and after several shifts back and force it is gone.

Thank you for making this video! Very useful to help me understand how to troubleshoot my switch problems!!!

Very good explanation! Greetings from the us

Great vid

Galing nyo boss salamat sa sharing sa kaalaman

Yun master galing nyo sir

daghang salamat master sa klareks kaayo nga tutorial,God bless.

Thank you sir..mabuhay ka kabayan.nice tutorial.

This is good content bro

Hi, your video was quite educative, thanks for the effort....I have an inquiry, I'd like to power a 12V relay using the pass light switch output...I intend to use the relay to close the NO & COM terminals as a pulse trigger for a secondary voltage free signal input device.....kindly advise

Excelente...

Idol, good day....very clear ang instructions. Keep up the good job.....naa ra ko question idol, unsaon pag.trace kung ang switch kay naay para fog lights? Unsoan pag.trace sa pins para sa foglights?

Salamat boss

Clear juice

Sir unsay problema sa akong crosswind, ig on sa headlight kay mo apil ang wiper, nya kung e turn right kay mo blink ug apil ang headlight, na unsa kaha ni sir?

Very informative tutorial,,sir,i would like to clarify the power supply line to be used on those switch,,is it really NEGATIVE POWER SOURCE?,,,thanks in advance for response❤

I would like to have this explained better in English

Boss makapalit ba ta anang handle combination switch? Kanang naa sa manobila dool? Para sa 4d31 canter. Mayntag matubag salamat. New subscriber ko nimo boss

sir ung positive source saan connected sa relay ba.

Hi , my left turn signal light does not reset (stop blinking). After I complete my turn). Do you have any ideas about what the defect is and how I can fix it please? Thx

Sir pa tulong,pag park light lang ako,sabay din ung high beam naka on sa Xpander combination switch.pero pag turn on light ok na naman low beam.kaso hindi ma matay ung hi beam,ano po kaya problema don?

Boss negative signal poba Yan sa relay pag galing sa switch

Boss paano malaman na 24v ang combination switch?

Panu kung naka on Ang headlight makakapag passing pa kaya

Negative ba switching ana sa high and low sir ?

Magtagalog ka na lng

They vídeo it's no clear.....

Sir unsay problema sa akong crosswind, ig on sa headlight kay mo apil ang wiper, nya kung e turn right kay mo blink ug apil ang headlight, na unsa kaha ni sir?