Common problems with HID headlight & how to fix it 

Thanks you’re video helped me out a lot got my lights fixed now

Atlast, I have found a video I was looking for. Thanks for your video and explaining. I have the same problem with my 2009 mazda3.

Thanks your video was a life saver

Thank you for the video it's really helpful

Thanks bro, very useful

Very good video, thank you

Guys..I have a Lexus gs450h 2007...this is a common problem with hid lights...the ballast on the headlights is located in the bottom part of the headlights and is exposed seriously to the water when the tires splashes the water while driving,.water gets inside the ballast because they are not sealed and I find out they come like this from the factory. So water gets inside the ballast component causing them to burn out the ballast and sometimes the hid lightbulb...I fix the problem..If you check the fuses and they are ok..i guarantee you 💯 percent it's the ballast. If you install new light bulbs and still don't work... can't go wrong. Change the ballast and make sure you seal the housing with some type of silicone to prevent the water from going inside .... hopefully this help you guys ..i save myself 1800 Dollars because the dealer want it to install new headlights in my car . All I spent was 90 dollars and got both ballasts plus the hid bulbs..good luck to all of you.

having to remove the front bumper and remove the headlight assembly on most modern cars in order to replace a light bulb is ridiculous

Thanks i think i have the same problem on my escalade

Super

So long story short, in this case the igniter component was bad, not the ballast. Interesting. However, still hard to diagnose unless you happen to have the spare known good parts on hand.

Great video sir. Thank you so much

2004 bmw headlights won’t come on unless you pull the switch back like flash to pass?

Hello, I appreciate your video! Can you tell me where the headlight module is on a 2010 mazada 3?

Hey i recently have an issue with my light while i was driving in rain light went out and then got a new bulb and not luck took out the bulb test if i heard the ballast work and well the socket looks like a taser when i turn the light on what could be?

I'm here after mechanics told me the cost of remove and check 70 usd 😂 so I'm not afraid because they don't give attention any part..

not seeing the troubleshooting with out new parts in hand

sir i have some issue on my lexus is250. low beam head light on left side, right side is no problem,but only the left low beam is not working.high beam is good and park/day light.. no problem with the fuse and bulb.. and my headlight also have condensation.. what do you think the problem? i check also the ignitor, on left side is looks better that the right head light. right head light ignitor is look's burn but work's perfect,but the left side ignitor is looks good but not working.. i don't know what should i replace please give me some advise.. thank you

So I have a similar with one headlight working with my 2007 acura tl I changed the bulbs and the fuse are good so that module will fix my issue also ?

Im having problems with my passenger side hid bulb being very dim. Ive swaped bulb over from drivers side and still same problem. Does this mean the ballast is failing? Mazda atenza 2005 sports wagon

Hey I also have one question I have ls430 2003 full ultra it’s right side headlight burn the bulb everytime so what is the problem ? Every time I put new bulb it burns it and smoke come out from it and it’s the bulb and wire are same the one ur showing in ur video what would be problem ?

I’m having an issue…mine turns on for about a minute and it turns off. Like if it goes into safe mode or something. I would have to switch the lights on & off sometimes like 3 times in order for it to stay on

Hey Mister me and my husband well my husband repealed the bulb and checked the fuse could it be the ballast?

You said the original ignitor was bad and can burn out the new ballast. If this is true, why didn't the bad original ignitor burn out the good original ballast???

How to connect@wiring from 3 pin halogen bulb replace to HID lamp?

new subscriber sir. how do i fix my Headlight the High Beam is not working. Wirings are good. the main problem is in the housing. the metal only clicks but the the beam still low beam

My hid headlights were new not even 6 months n right headlight burned out so changed fuses didnt fix at all, so maybe wiring. ?

My light is doing the same thing I have a 2005 Acura TSX I change the fuse and the hd light and it still doesn’t work what do I need to buy ?

I have an 04 Acura TSX and I just bought new headlights and a new ballast and a ignitor and the bulb is good but the damn passenger headlight will not come on?? Any answers

Y would u buy parts before diagnosis? U don’t diagnose by swapping parts. How would u determine which part u needed if u didn’t have these parts already.

How to diagnose without buying in advance parts which you might not use it? Any ways to check original igniter or balast? which one is faulty?

Hi I have HID d1s-d4s headlight bulb products, can you help me introduce how to install and I can give your product freely

My passenger HID bulb looks dimm, drivers side is brighter

Anyone know what the first little thing he plugged in was? I have problems with my light and I changed the bulb but I didn’t connect that little first thing. My lights are his lights

What the name of that part you replaced

Hello, Thanks for the video. I have a problem with my right low beam. Left side is okay it is working. Bulb is aslo okay I have checked it. When I check the connection, No voltage showing before ballast. Fuse is also fine. Do you have any idea where is the problem.Thanks

what ever happened to simple halogen...

I put a whole new one on mine and still doesn’t wanna turn on any suggestions

I changed both ballasts bulbs and igniters over 3 times they all last less then a week now my driver side won’t work and from time to time it will turn on again any advise?

My right won’t come on at all bought new one still nothing I don’t know what’s going on

What could be the problem if hid or new light bulbs don't seem to be bright enough? stock light bulb is yellowest color and I change to new 8000k light bulb but at night the light don't seem to be bright enough. Could it be the ignitor or the ballast?

My hids are flickering when there are bumps on the road and at high speeds on the freeway. I put in new bulbs but still the same

My driver hid flickers and then shuts off when I turn it on. I tried changing the bulbs, swap ballast, and even trying different headlights. Still does the same. I tried plugging in the driver headlight to the passenger connector and it works!? The fuses are good, I am thinking it could possibly be the turn signal switch cause I also notice the turn signal sometimes does not go on. Or it could be a kink in the wire? What do you guys think?

Why wouldn't replace the ballast while you've gone to all that trouble ?!?

I changed my ballast and igniter and bulb but still not working?

A headlight facing down over concrete? 🤐

You didn't fixed you replaced

SHEEEEEEEEEEEESH all of this just to change a fkn lightbulb talk about reinventing the wheel

What tf you said

I think I you're not about RU-vidr ok