Complete Wall Mounted Pressure Washer Install (Custom Setup)

Подписаться 1,1 тыс.

Просмотров 11 тыс.

50% 1

Next up on the garage renovation list is a wall mounted pressure washer setup for my Active 2.3 pressure washer. This is my attempt at a complete, end to end walk through on everything I did from the pex plumbing to installing the Mosmatic wand holder.
This installation also features the RapidAir FastPipe kit for the CR Spotless tanks, which I think is a worthy consideration as far as wall mounted setups go.
Necessary disclaimers:
- I make no claims that any methodology demonstrated here is the right way to do it. This is not a DIY, but rather a ride along to show you what I did and to point out things I think are worth noting.
- despite lots of research, there was much trial and error
- the parts listed are what i used; there may be (and likely are) better parts available
- attempt at your own risk; most will suggest hiring a qualified plumber (which I am not)
Ok, that said, here is a Google doc sheet listing every single item I used for this setup: docs.google.com/spreadsheets/...
I'd love to hear your feedback and if you have any questions, feel free to ask but know that I am by no means an expert on anything involved.
Corrections/Additions/Updates (probably on ongoing list):
- the Prevost fittings are aluminum, not plastic
Thanks for watching!
- Jeremy
🔔 Subscribe for more mods, maintenance and detailing videos!
Here’s some of my favorite detailing/garage products (plus stuff I use to film if you’re interested in that). Most of these are affiliate links meaning I get a small commission from purchases at no extra cost to you.
If you’d like to support the channel, pick something up! You can also shop at Obsessed Garage using this link: bit.ly/4eiUYJm - your support is very much appreciated!
Products in this video: see above linked spreadsheet
My OBDII Setup
Veepeak Bluetooth Scanner (for BimmerCode): amzn.to/48aJSCU
ENET Cable (for Bootmod3, ISTA, etc): amzn.to/3Sf3FKv
Favorite Detailing Chemicals:
Koch-Chemie GSF: bit.ly/4bWtjfI
OG Decon Soap: bit.ly/4bYbUDj
P&S Brake Buster: bit.ly/4evdOgy
P&S Interior Cleaner: amzn.to/47neBv5
P&S Iron Buster: bit.ly/45nP9Gh
Drying Aid: bit.ly/4eduFEx
CarPro TarX: bit.ly/3KHLEkO
CarPro Eraser: bit.ly/3Rolfw7
Invisible Glass: bit.ly/3xcyhWC
Meguiar’s APC (engine bay): amzn.to/41MI6Fo
Meguiar’s Hyper Dressing (engine bay, wheels): bit.ly/3VFgjpd
McKee’s 37 N-914 Rinseless (clay bar lubricant): bit.ly/3XnnX8K
Sonax Alcantara Cleaner: bit.ly/4aUg264
Detailing Tools:
Microfiber Madness Incredipad: bit.ly/3RkGAGM
Tire brush: amzn.to/47pZ3qk
Wheel Mitt: bit.ly/3KFKNkA
Nanoskin AutoScrub: amzn.to/3ROpwIt
DF Brushes (engine, wheels, mats): amzn.to/4aCQiMu
DF Ultra Soft Brushes (interior): bit.ly/4cejsBC
DF Curveball Brush (tires): bit.ly/3yRV6iE
DF EZ Detail Brush: bit.ly/3Xm2FIS
Lilly brush (best pet hair remover): amzn.to/48mZlzB
DIY Maintenance Tools:
Battery Analyzer: amzn.to/3GWlE36
Battery Tender: amzn.to/3TVMXC1
Milwaukee Ratchet: amzn.to/48RISnj
Flex Head Ratchet Set: amzn.to/3Si9jvf
Torque wrench: amzn.to/3vJPUfc
Lug Nut Socket: amzn.to/3UgDNAs
E-Torx Set: amzn.to/49fMLm1
Punch Set: amzn.to/49894tF
Trim Tool Kit: amzn.to/3ucUFxw
Magnetic Wands: amzn.to/49cKkjM
Film Gear:
Main camera amzn.to/4aKWbHp
Insta360: amzn.to/3W5GZy4
Lens: amzn.to/3tIrAty
Mic: amzn.to/48lYsaF
Gimbal: amzn.to/3H47CN3
Lights: amzn.to/41KTHEU
Tripod: amzn.to/41LpGF4
Check out some more videos:
• New Valvetronic Design...
• 8 Step FULL Exterior D...
• Bimmer INVASION 2023 C...
Instagram: / jgo.m3
Music I use (free trial referral link): share.epidemicsound.com/6qz34k
Timestamps:
00:00 - Intro
03:00 - Parts
09:29 - Plumbing layout and fittings
13:13 - Aluminum piping
14:50 - FastPipe installation kit
15:36 - Getting started
16:53 - Mounting heights
18:36 - Installing the CR Spotless mounting plate
23:03 - First cut and left side assembly
29:28 - Finishing the loop
35:47 - Fixing a mistake
37:19 - Pex pipe installation
40:02 - Finishing the piping
41:07 - Installing the shelf
43:00 - Installing the hose reel mounting plate
44:10 - Cox hose reel setup
46:03 - Finishing up
47:09 - Installing CR tanks
48:46 - Hose reel pro tip
49:39 - First test
50:18 - Fixing a leak
52:13 - Done!
#pressurewasher #cardetailing #wallmounted

Авто/Мото

Опубликовано:

2 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@jgo.m3 2 месяца назад

Google doc sheet listing all parts for this setup: docs.google.com/spreadsheets/d/1YdyQOuGelg3lG8bqruYH-2dkobIgIo1y5C8DFIpxGyc

@jasondickens9003 2 месяца назад

Nice job, what was your tds reading in ppm before the installation of the CR spotless filtration system and could you share the paint color and brand that you used to coat the garage walls?

@ObsessedGarage 2 месяца назад

Great video - one thing to mention and clarify however is that the Prevost fittings are anodized aluminum, not plastic. Nice work!

@jgo.m3 2 месяца назад

Thanks! Really appreciate you guys checking it out. And yeah, I saw that about the Prevost fittings after the fact.. my bad. Correction added to description.

@jamesclifford3222 5 дней назад

Great job, that looks so cool.

@jgo.m3 4 дня назад

Thanks brother 🍻

@IamDetailedAF 2 месяца назад

Awesome wall setup!!!

@jgo.m3 2 месяца назад

Thanks man, appreciate you checking it out 👍

@ThisOldDetailingDude 2 месяца назад

Phenomenal video!!! Thank you for such detailed explanation of every step. Great step up. I will definitely be looking into rapid air set up. Thanks again for such a great tutorial

@jgo.m3 2 месяца назад

Much appreciated brother! Hope it helps for your setup 🍻 it's definitely a project but insanely transforms the wash process experience.

@26-CJ Месяц назад

@@jgo.m3tip. We used a hair dryer to heat up the yellow stickers and as you heat it grab a corner and slowly peal as your moving the hair dryer across the sticker. Comes off perfectly. Then use some Goof Off the wipe any sticky residue. Spray it onto a peeper towel and wipe the residue off and your done.

@jgo.m3 Месяц назад

@@26-CJ awesome tip brother, thank you! 🍻

@26-CJ Месяц назад

@@jgo.m3 our pleasure. We just finished installing our own setup. We used all the prevost pipes and fittings but this is cool as well. Didn’t know they made other fittings that worked with the prevost pipe. Are those blue fittings also prevost fittings. Sorry if you said and didn’t catch it.

@jgo.m3 Месяц назад

@@26-CJ all good, actually the pipe and fittings are from a company called RapidAir; it's their FastPipe kit. Same kind of aluminum pipe, but these are plastic fittings as opposed to the aluminum fittings Prevost uses.

@g.dubyou6263 2 месяца назад

I’m glad you clocked the shutoff valves like you did. I was yelling at the screen at 21:20. 🤣 glad you finally saw it.

@jgo.m3 2 месяца назад

Haha! I almost cut that part out but I wanted to show the error of my ways 🤣

@g.dubyou6263 2 месяца назад

@@jgo.m3 haha! Glad it worked out. Maybe, if you didn’t see it, right away, you’d figure it, eventually. 🤣

@DumbUserName782 26 дней назад

Thank you!

@jgo.m3 25 дней назад

Anytime bro 🍻

@Reaper-Jim 2 месяца назад

Looks pretty sick, man. I’m not 100% confident in the plastic fittings, but then I’m no plumber either. I’m sure you’ll get many years out of the setup. The Kranzle would have looked better imo but the 2.3 is a champ up there. 😊😊😊

@jgo.m3 2 месяца назад

Thank you brother. You guys will certainly be the first to know if the plastic gives way but the internals look pretty solid and, after the first wash at least, everything seems to be holding up. And yeah man I definitely would have loved to have pulled the trigger on a Kranzle, but I'm beyond happy with the 2.3 👍

@gflores7018 2 месяца назад

How is the vibration on pressure washer on shelf , will not move out of shelf. Will not move ? Looks great Thank you for the video

@jgo.m3 2 месяца назад

Thanks! It's not bad actually and it definitely doesn't move. I wouldn't put the pressure washer on the front edge by any means but at 29lbs for the standalone unit, it's not going anywhere.

@jasondickens9003 2 месяца назад

@jgo.m3 nice job. Do you mind sharing what color and brand of paint you used on your garage walls? Thanks

@jgo.m3 2 месяца назад

Thanks man. The wall paint is Sherwin-Williams Fortitude (SW 9562).

@jasondickens9003 2 месяца назад

What was you tds reading for ppm before adding in the CR spotless filtration system?

@jgo.m3 2 месяца назад

I didn't check, but the TDS rating in my area is about 215 and spots were very noticeable. I've done one wash with the CR tanks now and it's insane how well they work.

@carbide8582 Месяц назад

So I have a 30x30 piece of 1/2 plywood I mounted using 4 hefty 7/16 x 2" long lag screws. Will it be enough to support the shelf w/ pressure washer along with the 100ft hose reel? Im obviously only going to be screwing into the plywood.

@jgo.m3 Месяц назад

Sorry bro, I wouldn't be the one to tell you if that will work. I don't know what shelf you have but if it's the 18 or 20" size, that should be able to go into the studs. For the hose reel, you should consider the backing plate since there will be added tension pulling on the hose as it comes off the reel.

@stanleyds88 29 дней назад

I have a question, I have an active 2.3 and I want to do a DI water setup.. can the CR spotless keep up with the demands of the washer? The manual says it needs an input of 4.8 gpm and CR spotless says they want the output at around 2.5 gpm to maintain 0 ppm

@jgo.m3 28 дней назад

From what I read in the manual, you just need to keep the GPM under 4 if using the DIW/C-20 and it doesn't matter what your PSI is. So far, it seems to work great with the 2.3.

@Mustafadroid Месяц назад

Great video brother. I got a tip for u on the water valve you can remove the screw on top of the handle and move it to your like position and screw it back on.

@jgo.m3 Месяц назад

Maaaaan.. wish I'd known that earlier lol. Fantastic tip bro, thank you!

@trconway 28 дней назад

Just watched this video and you did a great job. I just completed this setup without the water filtration. Got my parts from various sellers. Obsessed Garage is too expensive for me.

@jgo.m3 28 дней назад

Thanks brother, I appreciate that. How are you liking your setup? And yeah OG def procures some crazy top shelf stuff. Sometimes I'll splurge if I think the experience will be worth it or if it's something I learned about from their videos and other times I'll get something cheaper elsewhere.

@trconway 27 дней назад

@@jgo.m3 My system makes washing my cars easier. I have the first generation Active VE52 and figuring out nozzle size to use. Based on the calculator on MTM Hydro I should use a 2.68 orifice, not available, so I got 3.0 to start with. We'll see.

@trconway 22 дня назад

Sent you an email, wondering if you got it.

@jgo.m3 22 дня назад

@@trconway yep, got it and replied last week. Did it end up in spam or something?

@trconway 6 дней назад

@@jgo.m3 Unable to find your email. Please resend.

@whitegoodman7465 Месяц назад

I had bad luck with coxreels with powder coat in the threads and just shotty QC..if bought from OG they are made sure they come perfect tho..still doesnt touch reelcraft, hannay, titan, etc..

@jgo.m3 Месяц назад

That sucks.. fortunately I haven't had any issues so far but good to know some other brands just in case.

@WaylandsWorld 2 месяца назад

Curious why the Aluminum vs Copper? Aesthetics? Also curious how DI water will affect the aluminum over time.

@jgo.m3 2 месяца назад

Yeah probably and also I'd guess because aluminum is lighter and cheaper than copper. These systems were designed for compressed air, but they say it can be used with (non-potable) water.

@ACTIVEPRODUCTS 2 месяца назад

Pretty cool set-up! How are you liking it so far?

@jgo.m3 2 месяца назад

Thanks! It's ridiculously great. The time saved on set up and tear down alone is insane but add to that the upgraded performance coming from my K1700 and not racing to avoid water spots and it wildly improves the experience. I made a separate video on the Active 2.3 but, in short, it's a fantastic machine. Thanks for making it 🍻

@caseG80 2 месяца назад

If you wanted is there any reason why the pipe couldn't be used to hook to power washer? Nice video

@jgo.m3 2 месяца назад

Thank you brother 🍻 I don't see any reason why you couldn't as long as your temps and PSI are within range. For temps, FastPipe can handle up to 140ºF which is about what residential tap tops out at so you should be good there.

@Max-jv3yg 2 месяца назад

Best to keep the flexible/rubber to isolate the vibrations from the rigid pipe.

@an032nv 24 дня назад

Could you please explain why these set-ups have a gate valve immediately before and after the DI filter? I understand having one entering the filter because you'd have it shut if you just wanted to use tap water, but I don't understand having one immediately after the DI filter.

@jgo.m3 24 дня назад

I think it's because it prevents the back flow of water into the tanks. If you didn't have the valve after the tanks and bypassed to the unfiltered water, it would still flow around the loop and fill up the tanks.

@an032nv 24 дня назад

@@jgo.m3 Oh yeah, good point. I didn't consider that. Thank you!

@jgo.m3 24 дня назад

@@an032nv 🍻