Hi, we ordered 1.5 kw fiber cutter and just would like to ask if it’s ok to use compressed air for cutting 1.5mm stainless steel, that would be pendants and will be polished with machines after cutting. Thank you very much 😊
Hi i hope you fine, we have 1kw laser cutting machine 16bar compressor 74cfm past 4 months we are facing moisture issue in bottom lens we check with compressor person and dryer as per their statement all are working fine we use GI pipeline is it correct? please suggest with pipeline should use like ss (grade?) or aluminium
my doubt is the compressor to the laser machine we use the GI pipeline is it ok or not, if we need to change the pipeline so ss (what grade we need to use)
Hi, I am looking to get a fiber laser. 1500 watt confuser on compressor size. I see allot of guys use compressors around 10 to 12 bar. Then the person selling machine says it has to be 16 bar compressor. I mainly cut 1 mm carbon steel. Can you tell me if the 12 bar is enough ? If so what is max material you can cut with a 12 bar compressor. Thanks
What material? Carbon Steel? it is okay, but if you want a high brightness cutting section, I think oxygen is better. It depends on what result you are expecting.
Hi . Good day . Does the room temperature effect the compressed air. Means my dryer works proper but when I apply the nozzle more then 2.0 single diameter then the compressor runs constantly due to more air flow the lens gets wet. Any solution?
why is it shown to me (ftc sma wire or ceramic body alarm) I checked everything, it's not even up to the ceramic ring and I replaced the cable? @clara chai