Тёмный

Concertina bellows leak detection with smoke and thighten it with silicone-white spirit mixture 

pfeifer63
Подписаться 10
Просмотров 282
50% 1

Concertina bellows leak test with smoke:
(and thighten it with silicone-white spirits mixture)
I use a smoke machine, if you don‘t mind your concertina to smell like a pub in the 90ies, you may use cigarette smoke as well...
This bellows has been made from old brittle leather and therefore had many small leaks as the leather did not smoothly fit.
I tightened it with silicone, thinned with white spirits (Terpentinersatz) until the liquid had a consistency as wallpaint (or yoghurt). I applied inside the bellows two layers. The white spirit will vaporize and the silicone builds a thin airtight layer.
Quick and dirty...otherwise I had to throw away the bellows....maybe I will make a better one...later...at the moment it works quite well!

Видеоклипы

Опубликовано:

 

23 янв 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 7   
@howardbent5437
@howardbent5437 3 года назад
That was pretty cool. Awesome idea
@cas_creations
@cas_creations 3 года назад
Very cool idea!
@steffanjansenvanvuuren3257
@steffanjansenvanvuuren3257 Месяц назад
What if you do not have a smoke machine?
@pfeifer63
@pfeifer63 Месяц назад
Hey, I read other people to do it with cigarette smoke, I thought I may end up with a smelly Instrument - so I bought the smoke machine used for 20 Euros. (And can use it at parties as well 🙂
@steffanjansenvanvuuren3257
@steffanjansenvanvuuren3257 Месяц назад
@@pfeifer63 I'm building my first bellows, I hope it is "airtight". But I know for a fact that air (at a certain pressure) can go through the gusset leather.
@pfeifer63
@pfeifer63 Месяц назад
@@steffanjansenvanvuuren3257 Aye, they shall be tight at a pressure of about 2.5 to 4.5 inch of water column. They say if you open the bellows, hold the lower end and let the bellows close it should take not less than about 40 seconds. To be honest, I did not manage that, as the green leather was really old and a bit brittle. I "paintet" the inside of the bellows with a mixture of white spirits and silicone to give it an inner sealing coat. That may work or not. I was lucky with that one. I tried the same on an another bellows but with no great improvement. It is not so easy to access the inner angles. I know that this is a quick and dirty action - However...if you never try, you never know!
@pfeifer63
@pfeifer63 Месяц назад
Go to my channel profile where you should have the possibility to send me a Email- I can send you some information about pneumatics in concertinas which I collected from internet researches.
Далее
Wirtz pumps are really clever
12:05
Просмотров 13 млн
Cold Welding Metals In a Vacuum
9:59
Просмотров 662 тыс.
SPILLED CHOCKY MILK PRANK ON BROTHER 😂 #shorts
00:12
Make Your Own Optical Lenses
24:29
Просмотров 471 тыс.
How did the Enigma Machine work?
19:26
Просмотров 9 млн
Reveal Invisible Motion With This Clever Video Trick
14:20
Darker Than Vantablack-Absorbs 99.9923% of Light
11:31
How does an Electric Motor work?  (DC Motor)
10:03
Просмотров 17 млн
The Darkest time of my life. And how I overcame it.
26:22
Free Internet - Hacking Foreign Satellites
31:38
Просмотров 641 тыс.
GODZILLA
2:09
Просмотров 887 тыс.