Concrete Countertop Solutions Instructional Video 

A few weeks ago I decided to install concrete counter tops in my outdoor kitchen. Since I've never messed with concrete counter tops and reading quite a bit of information (several companies) online I decided to purchase your half bullnose package in addition I ordered the sink form kit. After a completing the cabinets, this morning I took everything out of the box and layed the form materials out to get a game plan..... seemed pretty simple. Wow....everything went in fast !!! Now, I already had my tools out from building the cabinets but I installed all the forms (L- shaped top counter top w/ cut outs around columns, 36 lf. front & back side bullnose & 26 lf. bottom u shaped counter with cut outs for side burners, grill & sink) in about 4 hrs. The sink form is a snap!! As a first timer I learned....... fasten one end of the form and looked down the form to insure straightness as I fastened it down. The other thing I learned when cutting the material on my compound miter saw was to use a sharp 80 tooth blade and move the material away from the blade before raising the blade...I chipped a couple corners. NICE PRODUCT, easy to use and I would recommend it! Tomorrow the concrete goes in........

Great video. I love the product. I know this video is a bit dated, but you suggested using zinc coated screws but put regular welded wire mesh? Also, instead of using durock(which is really porous) I use hardie backer board(more dense and ridged). The boards can be siliconed/construction adhesives down instead of screwed. Like some else mentioned, it will make easier to uninstall in the future if replacing counter tops. Hope this held someone out

Muy buen video,gracias por compartir su conocimiento.Saludos

Excellent Instructional Video. In the description section you should place the list of materials used only to guide the novice

Super interesting video. I had wondered how concrete countertops would be installed.

I'm amazed! Awesome!

What would I need to do to frame up a farmers sink to the front edge of the molding

I've seen people using fibreglass mesh instead of wire mesh. Is it good enough?

Can you silicone down the concrete board to the tops of the cabinets? I’m afraid if i mess up I would not be able to remove the countertop. Great video. I’m going to start out making a concrete bar top before doing my kitchen cabinets

How long before you can remove the Z-Forms?

I have a concrete counters in my kitchen. The sealer is peeling off. What product/steps do I take to remove sealer and refinish? Countertops are less than 6 months old and I've given up on contractor fixing.

So there is plastic sheet on the "ceiling" of the cabinets? Or is that removed afterwards?

Can I add black dye of some kind to a gallon of water than just add it to the mix ?

what is the recommended way to span over a dishwasher?

Were do I buy the forms here in Mexico?

Looks Good, The video was well done, and very informative. But the back round music makes it hard to watch. Thank You for a informative video, Al

What if you are keeping your current backsplash?

how do you folks compare glass fiber reinforced concrete to the wire mesh reinforced? I planned on using GFRC in my countertop instead

What's the most overhang you should have on a bar top? One other question I'm wanting to do a bright glossy white counter how do I go about getting the bright white color?

I have plywood down on my new cabinets and intend on putting durock on top. Can I use 1/4 durock board on my plywood?

Does anyone know if you could use something like crown molding in place of the forms and just leave them up?

My tops are going to be installed outdoors. Can I grind them down with progressively finer grit diamond pads and a wet grinder like I've seen done on molded tops?

what kind of concrete are you using here? The best I can find in the Tampa area is 5000 plus. I can't find any that are made specifically for countertops.

I've seen you use stainless steel sinks in all your videos. Do you recommend using granite composite sinks with this method?

can you have an over hang like for a bar area? maybe an eight to ten inch over hang?

Can you use other board or timber on top of the cabnients for the concrete base?

Are these forms one-time use?

why not use Sika Self Leveling cement? That stuff flows and levels itself.

I wish you wouldn't suggest that people use screws to secure the backer board to their cabinets. Regardless of material durability, countertops are a temporary thing, and using screws makes them permanent because it will severely damage the cabinets if removed. Nails would be just as functional but would allow easy removal of the countertops if needed. Love your products, just disagree 100% with this portion of your instruction....

Soooo. How thick was the cement board

"you can never vibrate too much"?? Well yes you can..

Way too dry, my boss would kick my ass if I did that.