Also, for those that don't have a numpad you can set each preset view "slot" to a different key on your keyboard. I personally just set each one to Shift+*Number*
Evan Weiler , I tried to save each view by holding control and one of numbers on pad, but that doesn't save anything to that number on the pad. Am I doing something wrong? Thanks
Ty, thank you so much! Newly switched over from FSX to X-Plane 11 and trying to learn from the pros like yourself. Great video and now I have my views mapped for the default 737-800! Have been a follower for quite a while now and will continue to watch your videos!
Hey, one extra tip I just discovered: if you have TrackIR, you can use it to "lean" out of the cockpit and, while outside the cockpit, shut off head tracking. Then you can position the camera for Ty's patented wing views without having to hack the config file.
Thank you very much for showing an amazing great tutorial,if I'm not wrong I would say that's the best so far I've come across on YT nicely done easy to follow. Keep it up.....👍
Hi, I'm a Sim pilot also, and I found out that you can open the cockpit door, and scroll or use the mouse and arrow keys to get back in the passenger area, and I was able to get by the wings and look out the window and see the Flaps in action!. Check it out, but it takes a while for the camera to get there. unless you do the speed hotkey trick, but I forgot which key it was. lol. Good luck. Terry
Hey Cat, I believe I'm able to do the exact same thing (without mod-ing a config file) by hitting Shift-6, setting up the view, then hitting the CTRL+NumPad button. I only learned this though by watching your video and experimenting. The video is much appreciated, thanks!
OK so on your Windows keyboard on the far right you should have a number keypad. Now on this keypad in the top left corner there is a key that says 'NUM LOCK'. Press this key and num lock will come on. press it againg and it will turn off.
Awesome, I have multiply monitors, with home cockpit, I always wanted set the middle monitor to view Hood with propeller only, and side monitors to wing view only. This video showed me how to hack the views in "X" and "Y" and "Z" access in word pad, thanks very much and regards.
Catstrator....regarding the "x", "y" and "z" axis this might help. These are coordinates in three dimensions with "x" being horizontal, "y" being vertical and "z" being "up and down". Draw a straight line across a sheet of paper (laying on a table) from left to right. Next, draw another straight line down the sheet of paper from top to bottom with the two lines intersecting in the middle. The left to right line is the "x" axis with anything on the left side of the"y" axis line being ....-x....and anything on the right side of the of the "y" axis line being....+x or simply.....x. Same thing for the top to bottom line. Above the "x" axis line is "+y" or simply "y" and anything below the "x" axis line is....."-y". Where the two lines intersect is your "0,0" coordinate. Now imagine the paper laying on a table with a line going through the "0,0" coordinate from above the table to below. That's the "z" axis which is the height above or below the flat plane or table on which the paper is laying. Where all three lines intersect is called the "0,0,0" coordinate. Anything above the plane of the table is a "+z" or just "z" and anything below the plane of the table is called "-z". Now, any point in the entire system can be defined by location. All that's left to do is to decide on the units of measure.....i.e......inches, centimeters, feet,yards, miles, kilometers etc. Hope this helps. Great job on the video!!
I have seitek yolk and X plane which automatically set the hat on the LH of the yolk to pan around inside and out, along with full stop and comma to pan in and out
Chiefman the standard 10 views are assigned with Cntl-NumpadNumber. You can also assign 10 additional views by creating keyboard shortcuts in the keyboard settings. Search for Views in keyboard settings.
I watched you and Jeff at flightsimcon. A little long landing xD! (To not taxi forever) Cool to see you in real life and then your channel! subbed and liked!
I followed and did everything but the views didn't work for me. I press the shift keys with the individual numbers but it didn't work. I also don't know how to pan inside the interior (passenger seating) of the airplane. Is there a plugin for that?
this didn't work for me, i pressed ctrl+# on the num pad and when i moved the camera and pressed the same keybind again, it did nothing. is there something im doing wrong?
Thanks for the good info you have done.I have a question tho ,when you are taxiing loutside view looking from the tail forward as the plane is taxing, BUT when you turn The camera does not follow the tail, how make it follow the tail when I do the turns left and right ? Like we did in FSX or P3dv4 or 5 ?
Nice, helpful video thums up.,,but a, my file does not look lk. yours, does not have all those various cam coordinates but just a few lines. Is smtg. wrong in what I dloaded then..?
Thanks for everything Ty I was always wondering how you got all those nice views of the plane. Also is it when you set the view say ctrl+4 for pilot's view, do you just type the key command ctrl+4 or just 4? I'm wondering this because I have speed brakes set for 4
great video! I received a free copy of x plane 11 from FlightSimCon and I'm going to try to switch to it from FSX. Does X plane have camera shake effects built in?
Very good and got few good thoughts for me. I do have one question tho ..I need a view ""FIX to follow the Tail"" as to taxiing , as the plane is turning so is the View point staying with the Craft .What should I be doing to setup ?
Great video, thanks. I loved the original views on 5 and 2. I only have one small problem. I setup two external views for Cessna but as I'm turning the plane the external views also rotate thus spoiling the angle of the original view I did setup. Is there a way to handle this?
Thank you so much its was very helpful and I just did not do the wing cams because I couldn't get the folder but its ok but thank you so much and do you still stream on fridays(P.S. I live in South Africa)
Locate that binding in the menu and set it to the appropriate camera position. There's a link to my key bindings in the description of the video, one of them includes binding a camera position (I think position 4)
Hello and thank you! Is there any way to map a view to a different monitor (without a plugin) so I could push the various cockpit control views to a fourth monitor?
Great Video but i want go know how to set up overlay camera so that when i take off i can see the cockpit view as well as i can see wing view at the same time.
OMG THANKS, SOO MUCH FOR THIS!!!! Also, can you do a video on how to add aircraft, and scenery to X-Plane 11 because I got it through steam, and I can't find the aircraft folder.