Connect a Mixer to Starmaker App - how to record and post on Starmaker 

Thank you

Very common issue the phone adapter. Coz most of the adapter, you will only hear all effects but will not work for recording/streaming. I got my adapter from Apple Store

@@jenuds I have a Samsung galaxy S20 plus. Thanks for your helpful tips.

I’m glad it helped

I got a simple mixer for about $40. It makes everything sound better.

Agree 👍

My pleasure

No problem

You are most welcome

Thank you. You can call me Jenuds.

Thank mam

I don’t have this kind of mixer. It looks like the RCA ports are in not out. You can perhaps try thru the Monitor or stereo out with a dual ts mono to 3.5mm with a y splitter. I don’t have an android phone that takes usb c only. I’m afraid that set up would be different connecting an android phone that has haedphone jack and usb c with just phone that has usb c only.

Yes you can. Just connect a big speaker or amplifier from the stereo out or Main out or Monitor out of your mixer.

That’s good for you

@@jenuds But the size of the card is large, I do not want a small size card

It supposed to be but I can’t guarantee as I can’t test all the apps. Some apps might not compatible to this sound card

Less gain from the mixer can reduce the noise as condenser mic is sensitive.

If you are connecting it to a mixer only, any xlr condenser mic. But if you will be using a sound card like K1, A2, Synido Live 100, Maonocaster Lite or E2, etc it’s good to buy a BM 800 mic coz for sure it’ll work on any of them.

@@jenuds Thank you, thank you for your excellent explanation

My pleasure

Welcome

I’m sorry I’m not very technical when it comes to latency as I’m only showing basic set up. If you still want my opinion, based on my experience on this kind of mixer that latency is very little that I could hardly notice it.

Audio mixer is for sure the best.

@@jenuds thank you

This mixer is a bit old. You might want something more advance than this. I would still go for mixer than a V8. V8 is an on the go recording or streaming with is very affordable than other kinds of sound cards.

@@jenuds thank you

@ajazmd13 no problem

www.amazon.ca/shop/jenudsstuffs/list/3SVV7XLOFUPKC?ref_=cm_sw_r_cp_ud_aipsflist_aipsfjenudsstuffs_25SQ7K5BA636SC4AQREG www.amazon.ca/shop/jenudsstuffs/list/2KXQ8KBVPMBBI?ref_=cm_sw_r_cp_ud_aipsflist_aipsfjenudsstuffs_ZV2HP0JQKAE6RWNH038J www.amazon.ca/shop/jenudsstuffs/list/2M711D7WOK90K?ref_=cm_sw_r_cp_ud_aipsflist_aipsfjenudsstuffs_ZV2HP0JQKAE6RWNH038J a.co/d/b1cc2aB

@@jenuds thank you

No problem

Stereo out from the mixer connect to your irig input. Then connect the iRig to your phone.

From my mixer, I can only reduce the gain to reduce noise. Are you using a headphone with built in mic? If yes that could cause the noise as well. Use the earphone/headphone without a built in mic.

Sorry if I can’t test this for you as I don’t have that kind of mixer. It looks like it doesn’t have the RCA Rec out port, not sure if it’ll work thru the Monitor out. Like in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ylcEAyDnQOg.html

Maybe but most likely, it would be mono.

You should be able to connect them. However it would be best if you record the video from the camera separate to your audio from the mixer then just combine them when you edit them. So you can place the camera wherever you want.

@@jenuds Okay, thanks for the clarification

No problem

In this video, i used RCA to 3.5 mm TRS (with 2 lines on the wire head) and RCA to 3.5mm TRRS (with 3 lines on the wire head). And the Y splitter I connected to the phone is 3.5 mm TRRS (with 3 lines on the wire head) to microphone and headphone.

@@jenuds شكراً 🌹

Try this one if mixer is without REC out port ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SMhG30QrdwI.html

Thank you

Ganon po ba. Dpo ako sound engineer Kaya gusto ko ring malaman ang reason. So kung gagamit ng audio mixer (not soundcard) at icoconect sa speaker, pano po if ang speakers connected sa amplifier? Pano po icoconect and speaker? I appreciate po if you'll respond.

pag po walang 7/8 san pwede sya lagay

Line in name po. 3/4 sa ibang mixer. Or. Kahit sa mic input pwede rin at set to zero lang ang echo.

You could be right however this is how it works for me. I would appreciate if you could show me as I want to know other kind of set up. So far I only hear one track as I was playing it on this video on the sample portion.