Connect and disconnect a gas cylinder for a barbecue 

Thanks for the nice comments and glad it helped 👍

Great, glad it helped and thanks for commenting 👍

That's great and thanks for commenting. Ha ha that's cool, it's a good barbecue, just the fat can drip a bit, so put a tray at the bottom too to stop any fat getting on the patio, the drip tray can overflow a bit 👍

@michaelosullivan7524 Thanks and I'm happy my video helped 👍

Thanks for commenting, useful info if there is no button 👍

Top tier comment! Thank you

Thank you for the nice comment 👍

Great thanks for watching and commenting 👍

Thanks for commenting and glad it helped. Please consider liking and subscribing if not already done so, many thanks 👍

Thanks for commenting and glad it helped 👍

@@xavierh.5743 Thanks 😊 👍

@monicapadilla-stemmelen2527 Great thanks for commenting and glad it helped 👍

No probs 👌 thanks for commenting 👍

No probs, thanks for commenting 👍

Thank you! I owe you a pint!

Very helpful. Thank you. Would it be so difficult for the manufacturer to write on it on put a sticker 🙄

No probs at all and enjoy 👍

That's great and thanks for your comment 👍

Thanks for commenting 👍

Thank you 👍

No problem, thanks for commenting and happy I could help. Have a great BBQ, enjoy 👍👍

Glad it helped and thanks for commenting 👍

No problem and thanks for commenting 👍

Hi the pipe to the bbq should already be connected. You shouldn't have to attach the gas pipe to the bbq unless it's new and you need to assemble it, if so follow the instructions. Obviously, only connect a gas bottle to a gas bbq, if its not a gas bbq you shouldn't be trying to connect a gas bottle to it, that could be a tad dangerous and definitely not recommended 😬✋️🛑

Forgot to say, thanks for commenting and I hope you get it sorted 👍

Great, thank you 😊

Hi, hmm that is a bit unusual, sorry a simple query but is there anything on the gas cylinder, a protective cover or something? When putting the gas regulator on the cylinder make sure the valve is in the off position. When pushing it on it should click. Also check to see if your gas regulator is correct for the cylinder, good to do this one first. It doesn't sound right that the gas regulator comes off, is the jubilee clip holding the gas regulator onto the gas pipe secure, it's a good idea to check this. If none of this helps, I would take ask for assistance from the company that supplied your gas cylinder. Hope this helps. 👍

@@MunDad many thanks for the quick response. Turns out the regulator was the wrong size and type so had to buy another one and then will go back to the manufacturer about the original they sent. Thanks again 👍

@addthatlittleextra No problem, glad you have sorted it 👍

Thanks for commenting 👍

Hi, it could be the plastic switch you use to turn the gas on /off, try pushing that in. Hope that works 💪

@@MunDad wow what a quick reply. I had to take something out like a safety cap XD well I’ve got it l, thanks anyway

Hi, sounds like it's empty, I would be careful though at poking the valve because there still could be some residual gas in it. Best thing would be to contact the supplier. You can buy gas cylinder stick on gauges to see how full/empty the tank is from amazon I think.

@@MunDad is it normal that there is some left over gas in the cylinder when it stops coming out?

Hmm, I'm not sure, you might get a bit of a hiss after disconnection. If unsure though speak to the supplier of the gas cylinder for advice 👍

Hi make sure the gas tap is off and is the regulator in the right position, should be facing the open part of the neck of the bottle. Are you pressing the button to release it?

@MunDad Yes it's on right position. Pressing botton to release it but the botton seems to be gammed. Is it because the pressure inside the gas tap? Can I use a force like a stick with hammer?

It's all good now. It wasn't the botton on the gas tap under the regulator but the switch on and off to regulate the pressure. Silly me 🤣

​@pavolkocis7456 Sorry only just seen your other messages, glad you sorted it in the end 👍

Hi mine is for propane, there should be a data label somewhere that will tell you what type you need. Have a look at think link www.flogas.co.uk/gas-bottles/regulator-selector#:~:text=Check%20the%20appliance%20itself%20or,so%20they're%20not%20interchangeable.

@@MunDad thanks

Hi sometimes the valve itself is the button, try pressing it in 👍

Hi thanks for your comment, I do show the button at the end of the video 👍

Great, thanks for commenting 👍

No probs at all and thanks for commenting 👍