Connect CCTV camera to DVR using video baluns and UTP cable 

New video for CCTV Cameras using Video Baluns : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Gvhwlo3QIb0.html

Good teachings great IDEAS are MADE Good experienced knowledge. Keep it updated 🙂

Thank you so much, this is the only video that shows it correctly.

Nice video, but I have a question what is the defarence Between 2+2 video bellon line and 1+1 line. Thanks

Thank you so much for this video, very help. Greatly appreciated it.

maybe elecbee connectors as well as other connectors. i think it's really helpful for me and i will recommend this video to my friends.thanks!

Thanks man for this !! You the best ! I help me .

Useful tutorial. God bless you.

How could I use a V+ and V- pair coming in (ie. as the input), and translate it to a more 'user friendly' output (like HDMI)? Can I use the balun to have the signal run the other way, and then plug the coaxial into a converter? Thanks :)

Hi, your video is very useful, thanks... I have a question: How far could the utp cable power 2 cameras without voltage loss ?

Thank you very much for this! One question: If you have one power supply and want to connect two analog cameras, what do you do in the power supply end? Do you put two pairs in each input, so 4 pairs in total?

Nice Informative and usefull tutorial.

Excelent video, thanks... So simple to understand...

thank you for sharing ypur idea how to connect cctv to dvr

Great video, pls I have a question , why didn't you use any of the other colour wire, is there a specific reason for using So and O

I love your tools , lol Where did you buy those cable clipper tools and video was clearly explained

Thank you for sharing sir new supporters here

So Clear Working You, Thank You so Much❤❤❤🇧🇩

I often wondered how UTP long runs don't lose voltage since the wire guage on utp is so thin. The doubling up of a PAIR to each pole of the power feel is a great idea i think. Minimizes the line loss due to thin wire.

Great video i have a question. Does it make a difference if i use a 2mp balun on a 5mp camera? And why?

I need something like this to record but I have 5.8 ghz wireless cameras. It is NOT as professional as this but for the time being it is fine.

Thanks I really enjoyed this helps refresh my memory

Hi Respactabile Sir How much cable use this baluns please give me a answer Thanks a lot,s Respactabile Sir very nice Guide.

Normally i use following: Video balun green for + whithe green for - and for supply brown and blue for + and white brown and white brown for - . The orange and orange white i don't use it. Every single cable for one camera and i puted 4 in every corner. I think that's the way for good connection and no interferences

Question… you didn't use a pair of the ethernet cable. Do you think I can use a single ethernet cable to connect two cams to the dvr? Of course I have to share the two pairs for the power supply of the two cams and, if the second cam is in a different position from the first, I have to open the ethernet cable and remove the pair of the second cam. What do you think about it?

Best video i need this titorial wooow

Please suggest to use seperate power cable when using CAT 5/6 UTP cable. Since these cameras are analog it will cause interference.

Thank you so much sir

Ve..nice.. ideas..sir thank you..

How do I power 8 cameras should I buy 12v power adapter for each of the camera as you did meaning & power adapters

Just wanna say thanks ey

Great Job ❤️

Thank you for the video. I have cat six and balun. Going to install CCTV ..less than. Hundred metre.

Hi. IT helped me very much. I have 1 issue why does it blink when i use a longer cabel? Please help

What kind of power supply is that?

Boa tarde amigo! Instalei 4 câmeras Intelbras na minha casa. Só que está monitorando só na tv como fazer para monitorar no celular.Obrigado

nice way if you want to save some money from the cables.. but what happens to HD cameras with 3 or 5 Megapixels? you may have loss in image quality. for long distances you can use a dvr that gets 2 or 4 extra ip cameras so you don t have to use signal cable at all.. for any other installation i think that nothing is compared with the classic coaxial camera cable.

It a nice tutorial thanks

Excellent job

Cat 6 cable not designed for analog camera care-full DC + - and stripes better keep in middle of wire so its will not move down incase if some one pulled hardly

Can we use single cat6 to connect to cameras? If yes what will be the color coding. Thanks

Very good program thanks

Hello, do you have a video on how to set up the tv screen for the cameras?

This is very helpful, but one thing I don't understand. If I have 10 cameras, will I need 10 power adaptors to power all the cameras?

Good job 👍

Very nice presentation

Will this work with differents analogs brands camera with different DVR brands?

What tools that you use?

Sir, I have a question, can you pair 2 cameras with 1 Ethernet cable, since there are 4 pairs?

What is the maximum length of this configuration? dc power and balun connection if the power supply is centralized?

thank you so and i got it..

Good job please why do I have lines in front of the camera video like interfering after using this balun setup

If i have dahua cameras with inbuilt microphone via coaxial to the dvr, microphone will work if i do this type of wiring??

thats a well done

Beautiful video

What type of utp cable you use sir? Cat5 or cat6 thanks

Thank you

Two pairs are always better than one. CCTV with two pairs in the balun gives a certain amount of redundancy in case one pair breaks. This is especially relative and important when installs are carried out in this configuration in cold countries. If installation takes place in very cold conditions, one pair can break very easily as Cat cable becomes extremely 'brittle' in the cold. Also freezing temperatures can lead to a break in the Cat cable inside any enclosure that the connections are housed in outdoors if there is any significant tension on the cable due to a tight fit. In both cases two pairs are far better than one. As using one is just laziness by the installer to be honest!

Dear sir, i need to confirm Safevant DVR can work any type of Analog camera .Please explain which type of analog camera can work of this Safevant dvr .

Can I use this method with any camera? or does it need PoE suport(or something like this)??

Friend.. if I connect several IP cameras via ethernet cable, will that make my internet a little slower?... I understand that Wi-Fi cameras do make the Wi-Fi internet slower, but I don't know if I should do it via ethernet also make it slower

Does it matter if the utp cable is cat 5,5e or cat 6, 6e in terms of the wiring method ?

How about pricing installation cost between rg59 and cat5e..?

Must use a high quality cat-6 cable and remember to give power supply externally for better vedio

terimakasih informasinya, mau tanya apakah ada perbedaan kualitas video menggunakan kabel utp cat5e atau cat6?

In such a connection can both audio and video works?

For less than 50 mtrs distance shall we use cat 5 cable sir

Does it work seamlessly when the utp cable is up to 300m, if so how do I solve the power problem from 300m away?

Thanks for the infos

Can you tell this step all camera system working?

Why you didn't use the green one for the video? Only one wire for positive and one wire for negative?

If the length of wire is +40 meter.. did adapter loses ampere at end ?

Thanks 🙏

I want to learn how to delete a footage on nvr

Za kameru ide od 12 v sa 2 konektora adapter mora imat 5 ampera sa 2 konektora na resiver i cameru

Very good work

so if we have no available premade bnc cable .then we use this video balon method right?

What is the max distance with these baluns?

Hi am confused so if I want to connect 8 camers IL have to get 8 separate power supply?

For how many meter you can use UTP cable in between the balun ? Can you use it for 400 meter?

thanks you

Hello there! I want to know if I can apply this type of connection for my analog camera to connect it to my NVR. So the idea is to have only one end of the UTP cable with video balun and the other end of the cable to have RJ45 to connect to the switch. Would that work????

Good video

J CONSTITUTION I HAVE 4-ANALOG CAMERA AND 3- IP CAMERA TRYING TO PUT THEM TOGETHER WHAT CABLE , I NEED DO I NEED DVR,OR NVR

Good idea

Can you double up on the video balun?

Can anyone tell me what the device is called at 5.02 mark? (used for connecting the electric wire)

Très bn chaîne

I need to know how to connect Jensen bulbs Camara

Thank u

Thank you !

nc......broo

Where I get this video baluns.

Will any light show on dvr

Salaam Muje 1 problem aa rahi ha k DVR local net pr chalta ha jb mai mobile ka data ho krta Hon tu connection fail ka option aa jata ha Mai Neye Neye pro Xvr pro sb application check ki hn Kindly is ka Hal batin

Can I use 2 wires only in power supply?

Nice 😉

Tnx

U have given one cc camera connection sir. 2 or more how to give power connection sir

Exellent 🔥🔥🙏