Connect Gas Line to Dryer or Gas Appliances 

You're welcome, Veronica. I'm glad to hear you're DIYing. Everyone starts somewhere.

You're welcome, Joanne.

You're welcome! I hope the video helps you.

Zach, you can use/run the dryer right after you apply the sealant. No need to wait. Thank you for the kind words, and I'm glad you enjoy the videos.

reo cam, you can apply the soapy water immediately after applying the RectorSeal 5. There's no need to give the sealant time to cure.

You can do it immediately, Huy.

Thank you, Leo. I usually wear gloves when I DIY or move things so I get a better grip on the thing I'm working on or moving.

There is a specific gas-rated teflon-type tape that is used for gas pipe and gas fittings. The tape is yellow in color to distinguish it from regular white-colored teflon tape that's used for water pipes and fittings. I've never used the gas-rated tape, so I can't tell you much about it. I use Rectroseal 5 for water and gas applications because it's never failed me. It's great stuff, and I love it. I hope this helps you.

You're welcome.

Jose, I reuse the same gas line UNLESS it's leaking or damaged in some way. The issue you may have now is that if you have tried to remove the current/old gas line and cannot, BUT may have loosened the line enough to cause a leak. Gas leaks are dangerous, so be very careful. If you reuse the gas line, please make sure you check the line for leaks at the wall/valve side do you're sure you have no leaks.

Longmeadow, I'm glad you asked this question. Let me clarify. Many years ago, I took a plumbing class from a Master Plumber, and he addressed this age-old issue--pipe dope vs. no pipe dope on flared fittings. He said he had several flared-fitting connections leak when he did not use pipe dope, but he did not have any connections leak when he used pipe dope. He believed and taught that pipe dope is "insurance" against a leak. I follow what he taught and have never had a flared-fitting connection leak. I hope this answers your question. Happy DIYing!

Yes.

You should not smell gas after you hook up and tighten the hose.

@@frugaldiy1 i redid the process and the gas smell is absent now so I think I forgot to put thread paste on one of the fittings and to be safe I barely turned the gas valve and there is enough gas to still start the dryer I don’t see the point of turning the valve completely when you only need so much gas for a dryer incase of a leak ?

@@kylearce9914 I'm glad you found the issue, Kyle. I will add that gas appliances are engineered to have the gas valve fully open, unless otherwise specified, which I have never seen.

Yes, if the gas line you have has a female fitting that is too large in diameter to screw on to the fitting on your gas dryer, you need to find a fitting that will adapt to the gas line and reduce down in size to the fitting on your gas dryer. You're looking for a fitting that is a female fitting to the dryer side and male male fitting to the gas line side. I would go to Lowe's or Home Depot and buy a dryer gas line connection kit--one that has various inside and outside diameter fittings. Or, you can take a picture with your phone of the gas connection fitting on your dryer and also use a ruler/measuring tape to measure the outside diameter of the fitting. Then, go to one of the big box stores to find a gas fitting that will fit. If you have a caliper to measure the fitting on your gas dryer, I'd use the caliper to get an exact outside diameter measurement.

@@frugaldiy1 thanks so much, i have a 3/4 gas fitting and even that is too big to connect to dryer… is it normal to go down to 1/2 or 1/4 ?

1/2", yes.

Thank you kindly, Crookz 714.

Rob, you have to follow the flexible gas tubing back to where the gas shutoff valve is to locate the shutoff valve. I can't tell you where your shutoff valve is because I don't know the configuration of the gas piping and lines in your home.

@@frugaldiy1 found it thanx

You;re welcome, Rob.

I tighten the fitting on the gas line a bit more and check for leaks/bubbles again.

@@frugaldiy1 Thank you! I thought I had to start all over again.

You're welcome, Ms. Williams. Nope, just tighten the fitting a bit more, a little at a time, and check for leaks again until you see no bubbles or fizzing. You got this! ;)

@@frugaldiy1 Thank you so much for the words of encouragement!!! ❤️❤️❤️

You're welcome, Ms. Williams. ;)