Hi sir, lot of good information thanks . Can I connect a diesel gen and make it to turn on and power the house when delta pro goes low or fully discharge?
Yes… the Ecoflow Smart Home Panel 2 does just that. The panel has two major connection ports 1) for connection to the the utility grid and 2) for connection to a standby generator. The automatic start up of the standby generator, gas or diesel, depends on its manufacture and making sure that it has that function to start up. Once it does that Ecoflow Smart Home Panel 2 will automatically switch over to the standby generator or back to utility which ever you have selected. To find out more about the Ecoflow Smart Home Panel 2 go to this website, bit.ly/4aPDX77 Going to this website has special discounts as well as informative information. To find out more about the Ecoflow Smart Home Panel 2… click on “Product Series” then select Ecoflow Smart Home Panel 2…that page will give you a lot of information that will answer all of your questions about this product. I hope this helps be sure and use this web address as it contains special discounts if you are ordering any of the products. Good luck
When the standby generator senses the loss of supply power from the Delta battery it will automatically start (if it has that option). The change-over switch on the home power 2 must be selected for the standby generator. The home will experience a momentary loss of power while this happens.
@@pspt ok thanks! Is there a solution for automatically go back to grid when grid power is available? What Im looking is for that triple backup; grid go off , switch to battery , when battery drains go to generator, when grid is back switch to grid and turn off de generator? Or Im being too ambitious?
@@omarpellot2065 Now you're getting into a highly specialized situation...the Home Panel 2 has a manual interlock that must be selected for either grid or standby (diesel) power. You have to choose one or the other for safety reasons. It is a manual interlock that is a break before make condition that Will not allow power to be switched back into the grid from auxiliary power sources.
I am seeing users on reddit having problems with the SHP 2 reliability and service. relay failures and error messages that shut down the panel with long delays in getting service. Is there a way to setup these smart panels but still be able to use the original subpanel without any delays?
The quick answer is yes absolutely. When connecting the smart home panel 2, the load wire connections can be made in the existing panel and the load breakers that were used can be left in place for a quick reconnect if there is trouble. Having said that, all of the breakers in the Smart Home Panel 2 can be manually switched just by toggling the breaker switches. If for some reason that doesn't work (due to a failed breaker etc.), there exists 2 relay switching knobs that can manually switch the main power.
