CONNECTING STAIRS WITH BASE AND TOP CONCRETE SLAB / PROBLEM SOLVED

Подписаться 6 тыс.

Просмотров 11 тыс.

50% 1

BIM Edin - Revit Tutorial
SOLVING THE PROBLEM OF THE STAIR LANDING
CONNECTING THE STAIRS WITH THE CONCRETE SLAB AT THE BASE AND AT THE TOP
In this Revit tutorial, I would like to show you how to solve the problem of connecting the stairs to the concrete base slab and to the top concrete slab.
As you must have already experienced, we very often face this problem when modeling stairs, especially in cases where we have a middle landing.
All of you who already have experience with Revit know for sure that the stairs can be connected to the concrete slab on top using the landing. However, the problem arises when we have a middle landing.
Because when we change the thickness of the landing on the top, the thickness of the landing also changes in the middle of the stairs, because the stairs, in Revit, allows us to use only one type of landing.
That is why in this tutorial I will show you a very simple solution for this problem.
To make it easier for you to follow this tutorial, I made all the concrete elements red.
RECTANGULAR STAIR CONNECTION AT THE BASE CONCRETE SLAB WITH MATERIAL TAKEOFF / TIPS AND TRICKS
• RECTANGULAR STAIR CONN...
Enjoy the video

Опубликовано:

22 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 11

@bimedin 8 месяцев назад

RECTANGULAR STAIR CONNECTION AT THE BASE CONCRETE SLAB WITH MATERIAL TAKEOFF / TIPS AND TRICKS ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--lMSytmHp8w.html

@ahmedfadel5978 Месяц назад

Excellent

@martinminkov1704 11 месяцев назад

Great video! Congratulations! Could you make a spiral staircase video please?

@bimedin 11 месяцев назад

Thank you for your support and comments. I'm pretty busy these days. As soon as I get a chance, I will record a new tutorial related to your question.

@MoNasr26 8 месяцев назад

Great idea, but what about using model in place for missing concrete triangle below stair "easy way", or modeling real landing insted of tiny landing you use Without needing to change landing thickness or separate the stair "you need to modify slab sketch to prevent overlapping"

@bimedin 8 месяцев назад

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--lMSytmHp8w.htmlsi=ymoA7GUiNrmVnDdK Thank you for your comment and support. On this link there is a tutorial for the rectangular connection of the staircase with the base concrete slab and the calculation of the materials for the staircase. The upper landing is thin for 2 reasons: - due to situations where there is not enough space for landing - due to differences in the materials of the final layer of the floor and staircase (avoiding problems with joining the staircase and floor)

@marlonreyes3499 11 месяцев назад

Stairs in concrete landing in between

@bojandjekic1 4 месяца назад

Svaka cast Edine. Vrlo originalno i inteligentno resenje. Ali ovo resenje {kao i ostala na YT za ovaj specifican problem} prati tu neku Revit logiku a ne logiku prakse? U praksi {kako u birou tako i na terenu} taj zadnji stepenik se nece izlivati u svojoj punoj visini vec ce biti nizi {to jest utopice se sa plocom} a puna visina se dalje formira putem kosuljice i ostalih slojeva poda iz MK. Da li ima nekog nacina da se to prenese i u Revit model? P.S. Meni je jedino palo na pamet da se formiraju dvoje stepenista, jedno na drugome, s time sto je donje monolitno samo od AB a drugo {ono na} da je samo od sloja gazista i cela? Medjutim, malo mi deluje sumanuto i prekomplikovano, krajnje ne prakticno...

@bimedin 4 месяца назад

Hvala na komentarima i na podršci. Revit omogućava velike olakšice na polju arhitekture, ali nažalost, nekad nema rešenja za veoma jednostavne probleme kakve ste upravo naveli. Moj predlog je da u preseku slojeve poda u zadnjem stepeniku iscrtate pomoću Filled Region alatke. Mislim da je jednostavnije nego da modelirate duplo stepenište. Opet kod manjih objekata izbor metode modeliranja stepeništa i ne menja toliko konačan rezultat, problem se javlja kada su veliki objekti u pitanju, gde imamo na desetine ili stotine stepeništa. Ako dođem do nekog praktičnijeg resenja objaviću tutorijal. LP

@bojandjekic1 4 месяца назад

@@bimedin Hvala ti na odgovoru Edine, zaista. Da bice da je to ipak najrazumnije reseje. Nalepiti Filled Region preko i terati dalje. Veliki pozdrav i hvala ti na videima, pratim sa merakom...