Connecting Two WIFI Routers With WDS And Sharing The Internet And Network

Подписаться 175 тыс.

Просмотров 521 тыс.

50% 1

#NSaleOnRU-vid
Link to TP-Link WDR4300 Router at Amazon: amzn.to/1yi4829 Or eBay: goo.gl/pahgDn
Link to KEDSUM® CP2102 Module STC Serial Converter At Amazon: amzn.to/1u7Pmd8 Or eBay: goo.gl/xT1dmR
Windows Driver for the CP2102 Module: www.silabs.com/products/mcu/P...
TP-Link N300 Wireless Wi-Fi Router (TL-WR841N) At Amazon: amzn.to/2gdL8h8 At eBay: goo.gl/W4FXUm
Here is a link to the Gigabit (1000 Mbps) Switch at Amazon: amzn.to/2xnKsNU Or Here On eBay: goo.gl/UxTeFn
Here is a link to a 100 Megabit (100 Mbps) Switch at Amazon: amzn.to/2ebIHus Or Here At eBay: goo.gl/pUvJPW
TP-Link AC900 WiFi Router At Amzon: amzn.to/2pm0Ie3 eBay: goo.gl/arPrb7
TP-Link WR940N Router (Upgraded) At Amazon: amzn.to/2NodxPu eBay: goo.gl/DJ4zQ1
TP-LINK TL-WR841ND Wireless N300 Home Router Detachable Antennas: amzn.to/1GUSvRS Or Here At eBay: goo.gl/BcBF1h
Cable Matters 160021 5-Feet Cat6 Snagless Ethernet Patch Cable, Pack of 5 (Black/ Blue/ White/ Red/ Green) At Amazon: amzn.to/2gdUg5k At eBay: goo.gl/uepWRp
STANLEY 94-248 65 Piece Homeowner's DIY Tool Kit At Amazon: amzn.to/2SR7ZzS Or eBay: goo.gl/1Qxn4s
Amazon Prime Membership Sign Up: goo.gl/ewmAV
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Facing Cam: amzn.to/2P9bazV Or eBay: goo.gl/7WkzYb
Overhead Cam: amzn.to/2E4kiF8 Or eBay: goo.gl/kqeoVv
Handheld cam: amzn.to/2Qmh2e5 Or eBay: goo.gl/KAiZyX
Video Software: amzn.to/2SjNKdf Or eBay: goo.gl/CdWBwG
Desktop Capture: amzn.to/2SgVaxQ Or eBay: goo.gl/LYNC3f
Mic: amzn.to/2KFj43r Or eBay: goo.gl/yC8uMC
Mic Wind Filter: amzn.to/2ScZdes Or eBay: goo.gl/HruSsJ
Lens: amzn.to/2Sj4S2G Or eBay goo.gl/C1z9vE
Lens Filter: amzn.to/2P2zN1n Or eBay: goo.gl/U3psNL
Wind filter for handheld cam: amzn.to/2P7TYuA Or eBay: goo.gl/wwRtEk
Selfiestick dslr: amzn.to/2TUR4gn Or eBay: goo.gl/Rtzrrd
Tool box: amzn.to/2E3r8dQ Or eBay: goo.gl/houqn4
Laptop stand: amzn.to/2E24dzH Or eBay: goo.gl/ZfXhT3
Studio mic: amzn.to/2Q2FO3w Or eBay: goo.gl/bHnT8Z
Tripod Neewer Professional 61 inches: amzn.to/2VnotkL Or eBay: goo.gl/GfNGGT
Neewer Lightweight Portable 66"/168cm Carbon Fiber Camera Tripod Monopod At Amazon: amzn.to/1rsQN5l Or eBay: goo.gl/AxonTQ
Tripod Neewer Alluminum Alloy 62": amzn.to/2LIbEwW Or eBay: goo.gl/ao5nss
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Last update 01/18/19
Connecting Two WIFI Routers With WDS And Sharing The Internet And Network

Хобби

Опубликовано:

26 авг 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 535

@meldeeter6190 Год назад

I found this video that described exactly what I needed to fix my home network issues. I ordered the TP-WR841N router only to find that the manufacturer has removed the WDS bridging option in hardware version 14. Now I am back to the hunt for a router that will support WDS.

@richardlloydusa Год назад

Have a look on eBay for a used older one. Just make sure you verify with the seller that the router is 100% functional and that it's the version you want. That way if it's not you can have eBay give you a refund through their guarantee. Make sure you take the shipping costs into account when purchasing as well. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@Dirtymax_Danimal 4 года назад

Hands down, the BEST tutorial video!!! Huge thanks from me and my family for letting us be connected.

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@BGgungame 4 года назад

Thanks a lot for making this. Awesome video. I just did what you said with my 2 TP-LINK routers and it worked like a charm. I now finally have wireless in the whole house.

@bigalstech7191 5 лет назад

Great job Richard simple to follow straight to the point no bloody stupid music like a lot of other how to videos . Thanks so much worked exactly as you said .

@sedimalko 4 года назад

4-5 years i set it up differently from your method. definitely your way is right. even though I had the internet, I had a lot of problems. i hope i no longer have to adjust it every time. thanks a lot! stay healthy.

@jennifermartin1010 4 года назад

YOU ARE A LIFESAVER !!!! i have been spending many long hours every weekend trying to do this - THANK YOU !!!

@hercegmj 5 лет назад

This is the most thorough video I have seen on this subject. Thanks for posting. Liked and subscribed.

@SalmanKhanIT 5 лет назад

Sir, I am IT Professional and watching your valuables videos. I learn a lot. I must say that you are good teacher. Again thanks

@vikassingh-xu9km 4 года назад

Great video and very helpful Richard. My initial thought was, this is a long video. Thankfully i stuck around :)

@The_Revealer_7 4 года назад

You are actually extending the range of a wireless signal, when you connect 2 routers. Brilliant idea!

@richardlloydusa 4 года назад

Yes that is right Sir. Thank you very much.

@cowantom 4 года назад

Honestly, I must have watched about 10 other vids and none worked. Not one other mentioned the crucial fact of the two routers needing to be on the same (don't know the correct name) 'third part' of the IP address eg. 192.168.x.1 (both needed to be have x as the same number). This was crucial yet none of the others made this clear. Well done mate, brilliantly clear tutorial.

@The_Revealer_7 4 года назад

Thank you so much for this information, Richard! It was very helpful. I had trouble in begining of my router setup. Yes, very important with no ip address conflict. Also important to set both options in wireless security PSK2 to automatic.

@jimtrader0152 3 года назад

I couldn't get this to work until I saw your comment about setting security to automatic. Why does setting the security to automatic make this work? Is this setting safe?

@mehulgandhi8 5 лет назад

Thank you for making this video. A little longer content ahead.... Although, I couldn't connect the 2 routers using the WDS bridge setting (may be my router's problem) but, I could connect them using the "Universal Repeater" option. Since, the basic method for extending the Wireless signals Range via the WDS bridging & the Universal Repeater; seems to be the same, hence your this video helped me alot. Moreover, I searched on RU-vid using phrases "How to...." But RU-vid surprised me with your video resulting "How & Why to do.... & How & Why not to do....". That really helped me here. Keep up the spirit, thanks again for taking out the time off your schedule & making such an explanatory video. I just had a small doubt, in an another video of yours, you suggested that 2 wireless devices shouldn't interfere. Hence we keep the channels different e.g. Channel 1, 6 or 11. Here comes the question... Won't these 2 wireless devices, if connected using WDS bridging, their signals be interefering? Don't we need to mention different channels for them, if those are mutually connected using WDS bridging? My same doubt applies on Universal repeater mode too, if you could share an answer, that'd really really wonderful. Another short question...(even may be silly one) In your another video, suggested only 3 channels (channel 1,6 & 11) for home network optimization (throughout connecting multiple routers together), what if we've an another 4th router in the picture, which channel would we be selecting?

@SyedNazimAbbasKazmi 5 лет назад

The most detailed, ellaborate and easiest tutorial to setup routers with WDS

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@tonywarren2267 4 года назад

An utterly brilliant description of how to connect a wifi extender . Clear , detailed and easy to follow . Simply one of the very best to watch and educate . Thank you.

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@adrianwilliamson5091 5 лет назад

Thank you I followed other tutorials but they didn't work but as soon as I watched yours it started to connect and work

@richardlloydusa 5 лет назад

You are most welcome. Glad I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@ghoshchayan Год назад

This is the most helpful video on wireless bridge network connection I have ever seen. Thanks a lot.

@richardlloydusa Год назад

You're most welcome. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@Yes_We_Can119 4 года назад

Thank you Richard for this comprehensive and detailed video. I really 'am thankful for all the effort you did to educate people like me. God Bless You!💐

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@KS.81 5 лет назад

Ah..! I found my real online tutor... you earned 1 sub... thz so much... wish u and yr family a good luck teacher 🤗

@nabilaerum2557 2 года назад

explained very brilliantly!! Thank you so much. You explained everything in-depth and made this difficult task so easy.

@richardlloydusa 2 года назад

You are most welcome. Thank you for watching and commenting. I appreciate it and your support greatly. All the best.👍😀

@DFridrich 4 года назад

Easy and simple. Just what I need. Thanks, Richard!

@shreerampandey4064 5 лет назад

Awesome....very well-elaborated...U are probably an IT teacher...thank you very much

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@palangiprince6715 5 лет назад

Thanks so much sending the love all the way from NZ

@bassamthoumy7012 4 года назад

RICHARD, you are really the KING.Many thanks.

@falzoncharles1973 5 лет назад

Mr Lloyd, I would like the opportunity to thank you for this detailed and informative video, although I don't know the difference between a router and a WiFi after following your instructions on the video I've managed to connect my two routers wirelessly, again thanks very much and keep it up.

@vannk73 4 года назад

The best tutorial. Thanks for sharing!

@karmdeepmishra 4 года назад

Thank you so much! You explained it very calmly and patiently. I followed you step by step, and got success in connecting my two routers wirelessly.

@richardlloydusa 4 года назад

You're most welcome. I'm glad to know I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@abdallaarbab1147 4 года назад

Hi Richard, I am sending you my respect and appreciation for what you are doing, this great Job . you videos are so informative and useful, praying for your blessing. I did follow the steps and every thing work perfectly, however when I disconnect the secondary router and connected again didn't work, very much appreciate your support.

@angshuster 5 лет назад

Thank you sir. Did it on my first attemp! was a long video but worked nicely. please carry on..

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@gregsimpson9391 4 года назад

Best and clearest explanation I have. Thanks.

@johnkerttu 4 года назад

I tried a few years ago to find out how to setup two routers but I was told by CHARTER Support and their office worker and their modem installer that it was not possible to have two routers on my cable connection. Thanks for your videos. I just bought the Netgear Nighthawk AX12 RAX120 router and I will attempt to connect both now that I seen your video.

@richardlloydusa Год назад

You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@greenpill810 4 года назад

Fantastic explanation... I LOVE your videos

@EM-df6mo 5 лет назад

Another great instructional video Richard. Much appreciation and respect.

@jagdishwarrao4287 5 лет назад

You are soo awesome!! Thank you so for making this great video, which helped me a lot to understand more about the router connectivities :) Take care and God Bless you Richard :):)

@richardlloydusa 5 лет назад

You are most welcome. I am glad to know I could help you. God bless you too. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@jagdishwarrao4287 5 лет назад

Anytime dear Richard... Thats really nice of you to say that and my pleasure and thank you so much as well to make our lives easier with these helpful videos :) God Bless you and wish you a Wonderful Day ahead dear friend :):)

@rendezvu175 4 года назад

The TP-Link guide for WDS never mentioned anything about changing the DHCP server range for the primary router. That explains why I couldn't get my second router to work using 192.168.0.2. Thank you this complete guide.

@fmom5319 2 года назад

HANDS DOWN THE BEST TUTORIAL ON HOW TO DO THIS!!!! THANK YOU THANK YOU THANK!!!!!!!

@richardlloydusa 2 года назад

You're most welcome. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@Pinoy_Archer 5 лет назад

Thanks Richard. I've learned a lot from your video.

@richardlloydusa 5 лет назад

You are most welcome. Glad I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@vivekmodi3165 6 месяцев назад

Nicely explained all the configuration. Thanks

@bipsj7224 4 года назад

Excellent detailed video. I have been able use this video to set my 2nd router. thank you.

@calmstillflat 4 года назад

thank you so much ! saved me tearing my hair out. great instructions, very clear !

@dominicp.temaluru6540 5 лет назад

Thank your for this helpful info as well as the explanation. Cheers!

@nortinn 5 лет назад

Excellent presentation. Thank you so much.

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@gohlaysiong 4 года назад

wonderful explanation, sharp and clear!

@CaffeinatedNerds 4 года назад

Great Video. Explained everything perfectly. :)

@KhusroMalik 2 года назад

Dear Richard, always great videos; very clear instructions showing understandable steps. One of your videos helped me doing an access point. Now I am creating a repeater and found this video.

@richardlloydusa 2 года назад

You're most welcome. Thank you so much for watching, commenting and the very kind words. I am happy to know you get value from my content. I appreciate it greatly. All the best.👍😀

@KhusroMalik 2 года назад

Dear Richard, on my laptop I can connect to the repeater but my Android phone fails after notifying "obtaining IP address". I fail to understand.

@richardlloydusa 2 года назад

Check and see if there's a firmware update for your router. If there is follow the instructions and update it. See what happens. Also are both devices connecting though WIFI? Thank you so much for watching and commenting. I appreciate it greatly. All the best.👍😀

@KhusroMalik 2 года назад

@@richardlloydusa update on host router or repeater? Yes, both devices connect to WIFI. Not only you have such wonderful videos but also your support is commendable. Thank you.

@KhusroMalik 2 года назад

@@richardlloydusa I did check for updates. None. Sometime back I had created an AP based on your video. Can I create a repeater for AP (instead of host router) as it could be simpler for me. The host router is Nokia G-240W-F. My AP is created on TP Link 930N 450mbps. For repeater I am using TP LInk 940N 300mbps.

@davidperez65 5 лет назад

Todos sus videos son muy buenos y la explicacion no puede ser mas clara me suscribo a su canal muchos tiene muchos videos interesantes sigue a si nunca cambies.

@richardlloydusa 5 лет назад

Muchas gracias.

@Rick_Sanchez_Jr. 3 года назад

Thank you brother, this was very useful

@edwardgiorgio2904 2 года назад

A very informative tutorial. With your help i was able to connect a tp link router very easy.

@richardlloydusa 2 года назад

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@DAIZDESIRE 5 лет назад

Thanks so much you've answered all my questions 😍

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@SurenComicArtts 2 года назад

Thanks Richard. Easy explanation. I'll try it.

@richardlloydusa 2 года назад

You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@abbasghod12344321 4 года назад

Thank you sir , very helpful and informative.

@JOHNBOYVR 4 года назад

Works perfectly thanks for the video pal 👍🏻

@russ.tech2you 5 лет назад

Great info....solved my problems👍

@barnabusphibes2597 4 года назад

Thanks. This was very informative.

@deepakkp2689 2 года назад

Thank you sir.. it's very helpful for me and i learned extra knowledge 👍

@richardlloydusa 2 года назад

You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@mixxedchannel 5 лет назад

I've just done that, it works great. I was doing it with to follow any tutorial. I had such a hard time figuring out to disable the DHCP server. ✌

@richardlloydusa 5 лет назад

Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@dirishshakya4807 5 лет назад

Omg it worked. Very good job sir.

@marceloribeirosimoes8959 5 лет назад

Nice tutorial! I am looking for a slightly different topology. I need to understand how to connect 2 routers to my ISP modem/router (wired, using cables). I think the basic idea is to have each router attached to two different LAN outputs on ISP's modem/router.

@MrFreekyJ 5 лет назад

Another great video mate... Thanks

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.

@anthonyb5625 4 года назад

Thanks heaps Richard. That was awesome

@findjesudoss 3 года назад

A great tutorial. Thanks 👍

@albertlopez2611 4 года назад

Thank you! Apparently I was doing something wrong the first THREE hours. Tried it again this afternoon with one exception, I didn't hardwire to computer and it worked perfectly!! WDS Status: RUN

@richardlloydusa 4 года назад

You are welcome. I am glad you sorted it out. Thank you for watching, commenting, the valuable feedback and the kind words. I appreciate it greatly. I am happy to know I could help. All the best.👍😀

@jithinsankar787 4 года назад

@@richardlloydusa sir i need you help...mine is tp link td-w8961n adsl modem+ router....it have wds mode but its asking for a wds key,i dont know what that is also there is option to enter 4 different mac address...if possible could you remotely setup my router or help me to configure it..

@keithwjones 4 года назад

Great instructions. Thank you.

@MyUsernameIsGuess 5 лет назад

Great video. I wondered about this. Now I know. Thanks.

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@adnanhassan3639 4 года назад

great work --- very informative

@rajesworbirsingh331 4 года назад

Thank you very much. I learned a lot from you.

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@jimbowman2438 4 года назад

Thanks for your time and I have watched the video end to end last night then stopping and starting today while I run through the setup on another laptop, I seem to have my Netgear nighthawk set up and all the correct LEDs flashing but since I save all the settings after doing the WDS section, I cannot log back into 192.168.1.2 and check/change the DHCP sett ings.

@SathanaST 5 лет назад

Love you! Thanks for sharing!!!

@richardlloydusa 5 лет назад

You are most welcome. Glad I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@sawancells 5 лет назад

Thanks Man You Made My Day

@richardlloydusa 5 лет назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@pierre1850 4 года назад

Hi M. Lloyd, I was happy to find your video, excellent and clear. I'm trying since a few days to get running my garage net segment but it don't work. I have an Engenius ENH200XT supporting 4 mode of WDS but I have tried all including WDS bridge mode... :( My main router is a Linksys E6900...

@pierre1850 4 года назад

I got it! but keepin my Engenius in client brige with a switch behind... 2 wired computers works. Problem is that I first installed a NAS that did not worked... Problem is at the NAS side on comm levels settings...

@DiscusJeff 5 лет назад

Hello, great video! If I want to connect my wireless security cameras to their own router so the signal is stronger with nothing else connected to it, would your setup work for that?

@aayushadhungana6416 5 лет назад

Thank you so much Richard...

@richardlloydusa 5 лет назад

Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@dingcapili9581 3 года назад

many thanks. very informative

@nemanjamilanovic1887 4 года назад

Awesome video, thanks very much!!!

@richardlloydusa Год назад

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@soumya9734 3 года назад

was looking and wondering for this theory...i dnt think icould do this...neded this so much thank you..

@vaibhavsingh144 5 лет назад

Thanks , very informative video

@alexsailaway1 5 лет назад

thanks Richard, nice video!

@richardlloydusa 5 лет назад

You are most welcome. Glad I could help. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@DolcheGuevara 5 лет назад

Great one. The only thing I would change is that you can change SSID and password for Second router to whatever you want.

@richardlloydusa 5 лет назад

Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@FatBoys69187 4 года назад

Thank u

@ferd6197 4 года назад

Great tutorial , thank you

@thestars8941 5 лет назад

great explanation 👍

@richardlloydusa 5 лет назад

Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@JDBeverage 5 лет назад

Thanks Richard. I reallyenjoy your videos. I have a fairly unreliable fiber ISP in Thailand with a ZyXEL all-in-one fiber modem/router/wireless/4 port switch with a Cisco SPA-112 2 port VoIP phone adapter bridged to a LAN port. I purchased a dual WAN Asus BRT-AC828 router featuring some USB ports which can use a a SIM dongle or a phone tether in place of one of the WAN's. My intention would be to use the failover/failback options on the Asus router to help ensure 24/7 internet thus VoIP phone lines working for our business. ISP's tech can hardly get their own equipment setup properly so I am looking for suggestions on how to setup the two routers this way. I'd be happy to pay for the help and grab all the screen shots or video needed for you to make a tutorial afterward. If you are interested, please advise a way to communicate the details out of the public domain. Thanks again for your videos and efforts to advise those of us with less experience in home networking. -JD

@rudy8357 4 года назад

Very well done!

@paulwong856 5 лет назад

Hi Richard, thank you for having such a helpful video! It really helped me to configure my WR841N router as the secondary router and it worked perfectly! However, I am not able to configure my band new Archer C6 in the same way that it should be. I couldn't find a way to enable the WDS function within the router setup. Could it be a problem of the router's firmware? Please suggest me what I can do in order to set it up? Thanks in advance!

@saakongheart1550 2 года назад

Thank you for sharing

@richardlloydusa 2 года назад

You're most welcome. I'm glad to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@sultanahmed5471 4 года назад

Thanks for describing everything so thoroughly, great work. The problem I am facing is that when I restart the main router, the secondary router doesn't work anymore, it says unidentified network, then I have to do the WDS set up again. Can you help?

@rrambana 4 года назад

Thanks for the info.

@richardlloydusa 2 года назад

You're most welcome. Thank you for watching, commenting, the valuable feedback and the kind words. I appreciate it greatly. I am happy to know I could help. All the best.👍😀

@Jamesbot-yn8xs 4 года назад

thank alot , this is helpful

@adey2005 4 года назад

Great tutorial

@TravisLang667 4 года назад

Great job. Thanks

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@haiderghadi7008 4 года назад

Thanks a lot you are genius!!!!!

@illuminare3687 4 года назад

Hi Richard, I successfully followed your previous video on how to connect 2 routers via a lan cable and am now thinking of following this video and connecting my second router wirelessly. Just wondered if you have any thoughts on whether it is worth doing this. My main router connected to the modem where the fibre broadband comes into the house, provided by my internet provider, is a Huawei F2000 and the router I connected to it is a tp-link AC1900 Wireless. Do you think I should replace the Huawei with a better router? I am not particuarly tech savvy but have found your videos engaging and extremely well presented, thanks and keep up the good work.

@AnimatedHooman 4 года назад

excellent video sir.

@richardlloydusa 4 года назад

Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@FrankoUSA 5 лет назад

Thank you works great.

@richardlloydusa 5 лет назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.

@Stanley_ 4 года назад

THANKS, WORK 100%

@greenvlex86 2 года назад

found you vid helpfull now to put to the test..

@richardlloydusa 2 года назад

Wishing you success. Thank you so much for commenting. I appreciate it greatly. All the best.👍😀

@bruceworman986 4 года назад

Thank you very much

@ukainausa 3 года назад

Richard, I watched your informative video on connecting two WIFI routers.I currently have two each Centurylink routers one is ZYXEL C3000ZS and the main router is ZYXEL C2100T. Am I able to follow your instructions on this video to do the same to configure the ZYXEL C3000ZS?

@megamrcooldude 4 года назад

Thank you very much. :-)

@richardlloydusa 4 года назад

You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@fikretdogan9367 3 года назад

thank you for the video.

@richardlloydusa 3 года назад

You're most welcome. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@s.l.8233 4 года назад

Hi, Richard. Great video! Thank you for putting that together. Is there a limit as to what the distance can be to effectively connect two routers (wirelessly)? My cable modem is downstairs in the Sun Room and my office is on the second floor on the opposite side of the house. I have used TP-Link Extenders (plugged to the Electrical Outlet and then connecting by RJ-45 cable). I would implement this to improve the signal. In the sun room, my download is 70 Mbps. Up in my office, it is 10-15 Mbps. Streaming video is fine but just wanted to get better throughput.