Convert K989 to RWD in 5 Minutes | WL Toys 1/28 K969 284131 284010 284161 A86 P929 P939

Подписаться 367

Просмотров 26 тыс.

50% 1

"Today we will increase the steering angle of the WL Toys 1/28 in order to convert it to RWD (rear-wheel drive) for drifting. The process is somewhat easy yet challenging, but compared to the tutorials scattered on the internet, the tutorial in this video seems to be the easiest and most cost-effective. This modification does not require 3D printing and does not need to buy conversion kit, using all original parts instead."
📹Related Video:
►Some short update: • K989 RWD Drift Modific...
►Servo Upgrade for K989: • Servo Upgrade for K989...
► How to replace the pinion gear: • Can't Drift? This migh...
►How to Install Dasmikro Gyro V5 on WL Toys 1/28: • The Best (and Most Aff...
►How to Install a $9 Gyro on WL Toys 1/28: • How to Install a $9 Gy...
Servo extender stl files: www.thingivers...
Update:
About thread locker usage: Some people have said that using thread locker on plastic is bad (Some say it makes the plastic brittle, while others say it softens it). I wasn't aware of this before since I never had any issues using BLUE thread locker on plastic. I couldn’t find any information from glue brands about this matter. The only information I could find was on RC forums, where some people say it’s bad for plastic, while others say it doesn’t matter. Personally, I haven’t experienced any problems with my front upper arm after applying a tiny amount of blue thread locker, but I’m unsure about the long-term effects. So, if you’re hesitant about using thread locker, it’s best not to use it. One thing is for sure: never use RED thread locker.
#kuikmix1/28 #kuikmix28wl

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@kuikmix 29 дней назад

*UPDATE:* 1. Use a stopper for the shaft: ru-vid.com8AEGstPbHTA 2. Some people say that thread locker is bad for plastic (read the description for more context). 3. How to Install Dasmikro Gyro V5 on WL Toys 1/28: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ituBVCn3Q4M.html 4. Servo Upgrade for K989: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-X8ltmc2TKEE.html 5. How to replace the pinion gear: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZnSnHN3VKT0.html

@nickmoxley6038 Месяц назад

Tip for future, Thread lock is for Metal to metal surfaces and pending the plastic can actually damage/soften the plastic.

@kuikmix 29 дней назад

Thanks for the info. I wrote an update about this matter in the description. Anyway, here some short drift test: ru-vid.com8AEGstPbHTA?feature=share

@osko90 28 дней назад

Damn! Where was this easy conversion when i did mine 5 months ago? This is actually a really good tutorial on rwd conversion. After going through many iterations on mine this is hands down the easy/best ive seen for non 3D printed! 👍

@kuikmix 25 дней назад

Thank you! You might want to check some related video: How to Install a $9 Gyro on WL Toys 1/28: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-97MrnJCIktc.html

@marcoantonioribeiro336 24 дня назад

Thanks, man! That was the video I was looking for! Big hug from Brasil!

@kuikmix 23 дня назад

Glad it helped!

@TheBabyskywalker Месяц назад

Awesome to stumble across your magic! Thank you for your fine work pimping rides!! Looking forward to following your tutorials…. start stop rewind’ seventeen thousand times…. Nice 🚘

@kuikmix Месяц назад

Wow thank you! I hope you can make it fine.

@roadstar499 Месяц назад

Insane you figured all this stuff out...and car seems really nice,not for everyone, but a few guys out there will be able to do this...

@kuikmix Месяц назад

I actually postponed this project for quite a long time because I wasn't confident working with small RCs. However, after trying it, I found it’s not that hard; you just need to be patient.

@Uncle-LeRoy Месяц назад

Sweet dude my buddy's and I all picked these up last year and need to do this.

@kuikmix 29 дней назад

Hope you can make it bro. Check for a short update: ru-vid.com8AEGstPbHTA?feature=share

@ferdis7 Месяц назад

Only use threadlock for metal to metal contact :) Threadlock can damage plastic!

@kuikmix Месяц назад

Welp, didn't know that. I use the blue one and it seems fine until now but I don't know for long term period. Don't use the red one for sure.

@ShowcaseCreative Месяц назад

Sir, you are a genius!

@kuikmix Месяц назад

Wow, thanks!

@kstano83 Месяц назад

Wow, thanks! I subscribed.

@kuikmix 29 дней назад

Awesome, thank you! Some short update: ru-vid.com8AEGstPbHTA?feature=share

@theerawatsritaweewat1004 20 дней назад

nice vdo mate

@kuikmix 19 дней назад

Thank you :)

@Hyzzaann 4 часа назад

Reall Big engel

@rkcampervan7162 20 дней назад

Cool video

@kuikmix 19 дней назад

Thanks :)

@Wyatt843 Месяц назад

This is almost exactly what i did to mine a week ago, im surprised that no one else had thought of doing it this way. Mine still handles poorly though

@kuikmix Месяц назад

I install some cheap gyro (RBR/C gyro that usually for WPL D12) and it can drift, but not that good. I'm pretty sure if I install better gyro (Dasmikro Gyro V5), it will perform better. But I need servo connector converter first since my 28431 electronic using 1.25mm JST plug will Gyro V5 use JST 1.5mm ZH plug.

@That_Boy_RD 6 дней назад

If i dont want that extra bit when it hits the lower arm do i stop there ?

@kuikmix 5 дней назад

Yes. It already give you plenty steering angle.

@aadammukhrizmdfirdaus6976 День назад

Why mine wltoys when its at the max steering angle the front wheel doesnt spin?

@kuikmix 4 часа назад

It depends on your wheels offset. The wheels might be scrubbing against something; for example, they could be touching the suspension notch on the lower arm. You may need to trim it or make it even. The point is to pay attention to whether the wheels are touching anything.

@JarkyNet 25 дней назад

Is this strong enough? Reliable? And able to drift?

@kuikmix 23 дня назад

So far, so good. But of course, there's always a risk with any modification, so proceed at your own risk. You might want to wait until this video series is complete, as I might discover some updates. Fyi, you can view some drift scenes on newer videos (link is on description).

@markpaulviesca5068 8 дней назад

acxwa V2 for k9 series is good for those who don't have skills on making this is hard to recommend. you'll end up ruining you car..

@kuikmix 8 дней назад

1. I'm not ruining my car; it drifts okay. 2. This video is for those who don’t want to buy parts or 3D print them themselves. 3. In my country, for the same price as the AXCWA V2, I can get a full 3D-printed chassis and parts from front to rear with high mount motor + better gear ratio. So, if I have to choose, I would choose to buy the full 3D-printed parts instead of just the front part of the AXCWA V2. 4. For some people, it’s fun to modify and tinker with their RC cars themselves. But it’s your car, so it’s your choice bro :)

@dencio1976 Месяц назад

You really need to run it first. It's not that simple. Otherwise people would've already done it with success. For such a small scale, alignment and tune will really be more sensitive.

@kuikmix Месяц назад

Actually, people already did this three years ago with a slightly different method. I just made it simpler, easier, and in a shorter video. I totally agree with you; mini RC is more sensitive (I recently learned that, lol). Anyway, I've tried to install a $10 gyro, and actually, it can drift, but the problem is the servo glitch. Most likely, it's because I used a cheap gyro, or I need to buy a ferrite magnet to minimize electronic interference. I will make a video using this cheap gyro; I just don't have time yet. But in short, the progress so far is promising. Stay tuned for updates.

@kuikmix 25 дней назад

Here's the update with cheap servo: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-97MrnJCIktc.html

@donnychrisvalen8276 Месяц назад

Mkin oke english language nya om,serasa dengrin beaver

@kuikmix Месяц назад

Saya cuma nulis script aja, yg ngomong bukan saya wkwkwkwk. Kalo saya ngomong English juga masih belepotan. Btw channel yg indo bisa cek youtube.com/@kuiktip ya. Biasanya upload duluan di channel itu baru disini. Dan kadang kalau ga sempat, ga upload disini juga.