Convert Sonoff RF Bridge to ESPHome 

Be careful revision 2 has the wrong pins marked.

Yay, thanks Jenny. Just modified a R1 V2. And it works brilliantly and super fast, I'm impressed. I would never have been able to do this without your video help explaining things. Thank you

New sub here. Came from Dr ZZZ. Great work. I already had aa RF Bridge modified from espurna that I had installed on it ( have garage remotes that can't detect on any firmware even with the mod done - turns out it uses rolling code - had to pull the remote apart to check the IC it was using)

Thanks for a great setup video, looking forward to more content from you

I finally got my door sensors working consistently after following your video, Thank you very much.

Thank you so much for this great video. I have been looking for this information for months!! Thank you!

Awesome video! I've been needing some cheap outdoor motion detectors, I have 1 Insteon (expensive) and a home-made esp-01 unit, but I wanted some cheap battery-powered units. Did some Googling and read about the Sonoff RF bridge. Sounded perfect. Oh, hardware mods required? No problem! So I ordered 1 and a cheap < $10.00 motion as a test. I'm also a huge fan of ESPHome (nothing wrong with Tasmota, but ESPHome works for me for some other things) then found your video. I went straight from the factory RF bridge to ESPhome so needed to connect to USB for the initial flash. Worked first try! Almost too small for my 60-year-old eyes, but I have magnification and some good soldering tools, so got it done. Thanks!

Definately gonna do this when I get mine in a few days.

Great stuff - very well explained and all the links too - couldn't be better - all much appreciated,

Thanks for the video. Thanks to you I have ESP-home on my sonoff RF bridge.

Excellent video just what I need, finding tasmota works but a little slow to react so I’ll be trying this.

Great video, have been trying to configure a tasmotized version and could not get my head around it. this has solved my problems, with your help. Thanks. Allan

Very interesting and well explained, thank you.

Thanks for the Video and excellent instructions, The rf bridge was my last device on tasmota and now all devices over to esphome. Love Esphome native API over Mqtt

Thanks for the video very informative please do some more.

Great tutorial - Many thanks it helps a lot - best regards from Poland,

That is cools. Nicely done. I will be doing this.

Thank you so much, this worked perfectly!

Thanks, this guide helped me set up my esp32 with an RF receiver