Converting distributor wires OBD2 to OBD1 or OBD1 to OBD2 DIY JUMPER 

Finally someone who makes a great video and explains very clear HUGE HUGE SHOUT OUT TO U Bro

Huge shotout to you man. Used an obd2 distributor on a obd 1 harness. I had de-pinned the obd2 plug and pinned the wires to obd1 plugs matching color for color. Code 9 for cyp. Swapped the orange and white wires like you said and the cel is off now. Thanks again!

Would have been nice to specify for what vehicle im trying to do this in my accord those plugs dont look the same

Just tried this about to install it and see how well it works

Hey bro how bout obd0 from the car to obd2 dizzy my car won't start it's a dpfi to mpfi. I check all the ecu wiring it's correct but not sure if the wiring at the dizzy is wrong cause they spliced in the obd2 pigtail to the car harness. Any help would be great thx

Life saver bro

Really good video. Lots of info. Only thing im a critic on is maybe a little more of a warning for the noobs.

I did a lsvtec swap in my 92 integra b18ablock/b16head I am having troubles finding the right distributor every one I've tried the plugs don't match the 2 on the harness anyone got any tips?

My civic 96 ex vtec idle air sensor valve have 2wires and i want to put in civic 00 cx hatchback non-vtec that a 3wires, what you think?

Help will this work on my prelude 93 si ?

Just a quick question , I’m have an obd1 94 integra and the motor went and I am going to pick up another motor but it is an obd2 , besides the distributed but else would I have to convert

does it work with obd2 ecu and wiring

What ECU were you using with that obd1 distributor?

which is the reason of you swap this two cables?(i have a d16y8 distributor and i gonna make a engine swap to b16a)and for sure i gona rewiring distributor to work the b16a on)...but i wanna explain the reason to do this swich on colors...and what will happens if all wires will be same yellow and white to..

Hey man got a obd2 dizzy and I got the obd1 plugs but everything matches up perfectly orange and white match up do I have to connect orange to white and white to orange?

So do I half to cut the car harness Or can i change the harness on my distributor from my distributor

How about a OBD2A TO OBD2B THE SMALLER SINGLE PLUG CONVERTED TO THE BIGGER SINGLE PLUG LIKE THE 1 IN THE VIDEO.

Great video did my car and its been over 8months

I have an Obd2 motor I’m putting in an obd1 car... is this the solution to why my car won’t start

Sir can this port be used or make some modification to enable auto door lock features in Hyundai i20??

Someones actually gonna watch this video, try this, and fry their ECM 😂🤣

Does it work for an h22??

So, I had a trash engine harness (obd1) with an obd2 dizzy installed ran great but I dint like the harness all cut up when I got the car so I had a new one (obd1) MPFI conversion harness made but!! When he made it he made it for an obd1 dizzy, so i got an obd1 dizyy for it now car has a idle surge and my damn tachometer doesnt work at all was something not wired right I noticed the obd2 has 1 plug and the new obd1 dizzy has two.. Seems the dizzy to jumper harness (tach) wasnt hooked up right or at all? Any help would be great.. Yes Im not great at explaining wiring jeje sorry and thanks

My b20 harness look different i don't have the two extra wares

My obd2 harness plug looks different to that, will it still be the same

Obd1 to obd2 everything matches color except what 2 do you swap?

Obudee....

all dizzy are same code wire?

is this why my shit revs up to 1500 and runs like dogshit? because i put obd1 dizzy on obd2 vtec motor?

Hey brother how are you, I have a b18b1 in my crv 5 speed rn. I just finished swapping long story short my distributor is good but I’m not receiving any spark I think the motor is an obd1 94 and I’m using obd2 cables from my prev b20. Would I need to convert my dist to a obd1? I tested my distributor and it’s good, I even tried another one off a running crv. It was still not giving spark. I know I’m getting fuel, and compression sounds healthy. Motor is shaking hard as icrank it trying to turn on

Couldn’t have made this more confusing bro

I swapped my obd2 non vtec into gsr vtech , runs but acts weird when hits vtec.

haha i didn’t believe till I tried it!! I was selling my teggy because I couldn’t get it to turn on n ones I seen this video n give it a try first turn on the switch it turned on

hw many pins does obd 1 has?

To make my p28 ecu work would i have to convert to obd 1 dizzy? 😵?

Mother fuckin OHBUHDEE! IT WORKED BROTHER! thanks man!

Is it still running ..we might do this . unless it fries ecus

I need one to civic96 obd2a to civic2000 obd2b...

Did it work?

How about obd2b to obd1?

why would you wanna go from obd2 too a obd1?

oI find it funny how he pronounces it Oboudy. I allways pronounced it O.B.D.

my white matches up with my white & my orange matches up with the orange

🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

This literally made no sense. I was hoping he would show the paper diagram, "like thaaa'at"