First time doing this, follow along if you dare! Video I used for reference: • How to Upgrade DJI ori... 0:00 Intro 0:17 Disassembly 3:20 Soldering 7:09 Reassemble 13:21 Hover Test 14:04 Flight Test 16:22 Last Words
Hi Tom, thank you so much for your information. Have just finished my build and works perfectly thanks to your work and Jay's. See you soon buddies and fly safe!! 🙂
Really appreciate the key piece of advice that "it's not worth it" but hey, very interesting! Please do a vid on how to insta remove screws with a finger tap, that's an awesome skill ;)
I went the solder to board for motor wires route and it worked but it then gave the issue of the metal casing not fitting so i had to mod that too. I was thinking i should have gone the wire cutting route but you have to choose one and stick to it. If the board soldering was that bad i can still cut the wires, you can't move to soldering to the board after cutting the wires. One thing that might make things easier for anyone following this along is to cut the wires at different lengths so the connections are not all in the same place on the arms. Easier for the cables to lie next to each other. Also the range suffers a little having the aerials on the inside of the plastic so i moved them to the outside, zip tied them up and taped over them for protection.
