DJI Avata AxisFlying 3.5 inch Conversion Upgrade Kit How-To 

Did you install props the wrong way?

The upgrade is worth the hard and difficult process . It took over 10 hours of work. But finally im no more afraid to make hard turns with stock avata and risk the crash.

Over 6 hours it took me .. and I'm no stranger to soldering or building quads. If I did it again, probably take 3 hours now I know what goes where

For anyone going to do this... when soldering the motor wires to the esc... its easier to rest the esc into the 03 shell, and put it over the new carbon frame with the bolts loosely pushed into the mounting holes. Then mount the motors to the arms with 2 bolts. That way everything stays solid and flat whilst soldering and much easier to get correct motor wire length

your editing skills made my poor building skills and this 13-hour build look like cinch. great working with you @SlayTech! It turned out so well!!!

Good god now this looks a beast, Great how to video, massive thumbs up

Researching rn, going to try it when I'm comfortable, awesome vids, thanks!!

Thanks bro, I'm using avata too

Great job, awesome video man. I watched all of it😅 I’d me sweating bullets by the end 😂 it’s like being a surgeon 😅

Thinking I may buy this today. I hope my experience is as straight forward as the one in this video. Thanks for the content. Great job explaining. Keep sending!

Very cool. I always struggle with my Cinalog change over after a crash it always breaks prop guards props and antenna after crashes I thought about making a video but it’s such a struggle just doing the change out I’m frustrated asf😂😂😂 nice video man I’m subscribing. I’ll see you around

Are you gonna do a test flight video? Would be cool to see more Avata 3.5 videos

GOOD VIDEO. Great tips. It's great to actually hear somebody talk and explain things . Getting my 3.5 kit next week. I'll be using this video. Can you do a test flight video next?

Thank you so much out of the ones I watched this video has helped me the most and I actually used different motors and will let let everyone know how it goes I had a bunch of ethix 1607 motors so I figured I'd at least try before I buy more motors

excellent video, way better than the offical axisflying one, thanks for making this. must've taken a lot of effort but it is appreciated. subbed.

Does the motors contain of CW and CCW? I dont see any indication assume they are interchangeable? Meaning any motor can be installed on any arm? Thanks

cool, friend! I did the update and everything works but the engines don't start, any tips? thanks!

Thank you for the tutorial, everything seemed to have gone well but I have a problem. the 4 motors do not respond, but the drone turns on and responds to the viewer and controller. do you have some advice? Thank you

Could you do a tool list or everything you need to successfully upgrade ?

Nice video! What temp did you have your soldering iron set to?

For information, why do you also change the battery connectors? Is there a risk that they will burn?

How come I have 5v on my extension cable for the usb but it’s not doing anything? Also I love the upgrade even though I’m missing like two of my finger tips now after almost getting chopped off

Did you experience frame in view if you keep the camera angle below 20 degree in manual mode?

Hi I have just followed your tutorial and after completing it I was testing my avata but it shows battery error / critical low battery and % shows 0 do you have any idea what could I have done wrong??

Hello there, thanks for the video. Where is the SD card slot now? Can it be easily accessed?

hi, I followed your tutorial is frankly top, however I encounter a problem, when I turn on the drone I have an alert that says "battery installation error" would you tell me what its could come from, thanks

Hello, I want to buy the kit for my AVATA, but I’m from Brazil, I have a little difficulty translating the lines, but I read better with the writing. How was the USB input and the SD input? Was it worth the modification? Can you answer me here?

Hi @Slaytech, I did this upgrade and the back two motors don't move, I'm assuming it's because I burned the ESCs (I used a really high solder temperature.. I know, I know). So I got a replacement board. But I realized also that the goggles won't connect anymore-- that doesn't seem to be a problem other people are having. Any advice? I think it connected the first time very briefly and then went black.

How to access the sd card thru the usb-c port? mine is not showing in my laptop as storage to access

What type of props that can fit with this upgrade?

hi, thanks for the amazing guide, I have followed all the steps but front 2 motors are not moving. on goggles it show propulsion and esc error. would you please help.

May I ask what rope you use to pull the damper starting at 15:37 in the video?

já ajudar demais quando eu for trocar o maim frame do meu que acidento

Great video and thank you for all the tips. Quick question, do you know what screws are used for the props? They sent me 3 pairs instead of 4 and I don’t think they will be willing to post 2 screws from china to Europe….

after the rebuild, my two front motors no longer respond. the motors themselves I have tested - they are ok! the solder joints are also ok. any tips?

Hello friend. I have Axis c-157 3650kv motors. Can I use this frame in Avata? Thanks

Hi everyone I’m having trouble with the installation and hoping someone can help. I’m having a battery communication error. I’ve checked if small battery cables are mixed but they are not they are correct. What could be the issue? Thank you!

What is the purpose of this upgrade weight ,power ?

Hi ! I did the upgrade today following your video (thanks btw!) but it says : "battery installation error".I tried to redo the welds a second time but it's the same thing. Do you have any idea of the problem ? Thanks

No one in these tutorial videos mentioned motor direction.. is there a diagram, there's no BF to change the direction. Thanks.

The warranty screw what is it made of acrylic?

mind as well built a new quad.

Do you really need the propguards on to fly ?

Hi, is that better than the original Avata?

can you access the SD card?

At 17:00, is that camera wire exposed?

after the mod, I am not getting any visuals. its asking for gimbal calibration but its stuck at zero

🎉🎉🎉FPV张同学

the instructions that comes with the package are the worse garbage I have ever seen, im not a drone builder but im pretty good with my hands, the illustrations and images are disgusting. I really appreciate your video. I least I have an idea what the entire drone looks like. thank you

Hi everyone! After many difficulties to change to axis, I want to explain to you so that you avoid the same mistake as me! - avoid soldering the motors directly on the ESC, i burned my card because of that even though i was very delicate with my soldering. it's a very fragile esc. if you burn, contact dji, the customer service will sell you an esc (50€) - solder the motors in the same direction as those you remove. I made the mistake of soldering the motors in reverse so the drone did not take off but sucked the ground - be very careful when you remove the cables with pin of the camera and the gps module, it is very fragile and I broke a pin... - when you close the drone, be careful not to jam the gps cables, it can cut them ...

Gloves are useless, u need ESD strap