No video :(

COOLANT TEMPERATURE SENSOR REPLACEMENT LOCATION BMW E90 E91 E92 E93 323i 325i 328i 330i 335i

Подписаться 968 тыс.

Просмотров 116 тыс.

50% 1

COOLANT TEMPERATURE SENSOR REPLACEMENT LOCATION BMW E90 E91 E92 E93 323i 325i 328i 330i 335i
In this video we will show you where the coolant temperature sensor is located and how to replace the coolant temperature sensor on BMW e91, e90, e92, e93. Always replace the coolant temperature sensor when the engine is ice cold and the coolant is cold. It is recommended to drain the cooling system when replacing the coolant temperature sensor and bleed the cooling system after replacing the coolant temperature sensor. We demonstrated where the coolant temperature sensor is located and how to replace the coolant temperature sensor on 2006 BMW 325i but it should be helpful on multiple models.
This might be helpful on:
2005 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
2006 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
2007 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
2008 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
2009 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
2010 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
2011 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
2012 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
2013 BMW Coolant Temperature Sensor Replacement Location BMW E90 E91 E92 E93 316i 318i 320i 323i 325i 328i 330i 335i 316d 318d 320d 325d 330d 335d 325xi 328xi
► Coolant Temperature Sensor (check fitment): amzn.to/30fZ3dR
► Check out our Amazon Store for the tools and parts that we use: www.amazon.com...
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 66

@AutoRepairGuys 4 года назад

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ru-vid.com ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@mjmqubesi 3 года назад

Hi sir, Morning i start my bmw till it's warm... i checked the upper & lower radiator hoses..they have the same T as ( no cooling process is active)... when i drive it for 5- 10 minutes, i noticed that the upper hose becomes ambient & the fan kicks on... How do you explain this?? BMW 2008 630i

@njordan148 2 года назад

Is this why I'm getting code P10B8?

@dhalsim-1 8 месяцев назад

Did you give the torque specs? Can't find it anywhere

@DaEverything1 3 года назад

Is this the coolant temperature that you are replacing or the oil temperature? I thought the coolant temperature sensor was located in the sides of the cylinder heads? do you have a video on that one?

@MENACE6 3 года назад

BIG thank you to you guys for the money saving vid's!! 💪💪💪🍻

@everescobar8719 2 года назад

What can cause my water pump to keep running after car is off? And doesn’t stop, replaced water pump and thermostat and stopped for about 6 months then started again. So now I disconnect the battery for now so the battery doesn’t die. Don’t have any codes either just the o2 sensors since I don’t have catalyc converters

@kjosephf 7 месяцев назад

Intelligent Battery Sensor on the negative terminal

@jesusflores4789 3 месяца назад

Muchas gracias muy bien explicado, que lamentable que en los videos de espanol le den tantas vueltas al tema.

@johantorres8714 3 года назад

My coolant light is on but coolant is full and looks good what can be causing the light to turn on

@christophermujay4723 2 года назад

On the bottom of the coolant reservoir there is a level sensor that sensor needs replacing

@paulolessportix 22 дня назад

Hi for code 009C53 or IHKA , i will change this sensor?

@masterquees 2 года назад

Hi there I have a bmw 320d turbo 2012 e92 N47 coupe 2.0L AND MY FAN IS NOT WORKING AT ALL however when I drive aircon is cold and when I stop aircon blows hot so I am gonna replace the temperature sensor so I found 1 wich is above the egr but now I see that you have 2 that one on this video and another one close to fan hose so I am just wondering if my car have 2 sensor or just 1 ?? And any other suggestions about what can be faulty for my fan to don’t work I am from Australia cheers .

@notdeeem310 3 месяца назад

going through this issue two years later and tips? i have an 08’ 328i i believe i have TWO coolant temp sensors 😊

@elliottstanaway9903 3 года назад

What is the torque spec

@kjosephf 7 месяцев назад

Gudentight

@lazartatar1828 3 месяца назад

I have code P0128 on my bmw 325i 2006, thermostat clogged open. I replaced the thermostat and water pump as well. But I still have that code on my car? What should I do?

@rafikghebrial8276 2 года назад

Hi I like all your videos it’s really helpful but this sensor is the oil pressure sensor not related to coolent at all Best of luck

@MikeBalaban-gf3br Год назад

My e90 radiator fan when I drive a while like 10 min it starts going full speed and not turning off till power off the car even at cold weather I did pump test all good did dignosist on computer no alarms could that be the coolant or thermostat sensor donno if both are the same .? Thanks

@kjosephf 7 месяцев назад

Did you find out? I have same issue about to replace my temp sensor

@MikeBalaban-gf3br 7 месяцев назад

@@kjosephf well I changed the Thermostat and it worked out perfectly

@BigDipperTV Год назад

What is the part called that the coolant temp sensor plugs into?

@nicolasliberatore3596 7 месяцев назад

Oil filter housing

@mfig Год назад

I have an issue with my 2016 328 xi the temperature gauge is not reading and my CEL is on

@romeyrome3219 2 года назад

Help please where is my 2006 BMW 325 I heater water control valve located at going crazy looking for it

@darknemesis901 2 года назад

ive got a n46 engine, and ive got code 2ee0 comming back which says; tempature sensor engine coolant. i have replaced the sensor close to the startmotor, and the sensor on the bottom hose from the radiator, any other suggestions ? ive only read the code with bimmerlink, will also try to read it with ista to get some more info

@onecookieboy 4 года назад

With such minimal coolant lost it would be pretty safe to say it will be okay to skip the whole bleeding the cooling system process.

@bfprecords 3 года назад

With B.M.W's the cooling system needs to be bled. With the car in accessory mode, foot on the gas pedal for 20 seconds and the heater on the highest setting the electronic water pump starts bleeding the system. If this procedure is done and air is not vacated from the system the cooling system will not operate properly.

@antof1235 3 года назад

@@bfprecords make sure to have a power pack or battery to jump off as this takes up to 12 mins without engine power

@kingjayjay98 Год назад

@@antof1235 would I need to add any more coolant on top of this? Or would the amount of coolant lost be too minimal to matter

@Mj94j Год назад

the engine temperature going down for BMW 328i xdrive e90 2009

@justincowan9010 4 года назад

Do you guys repair the German version Buick Regals? 2.0 gs models

@hellrzr96 3 года назад

I have a bmw 08 335i and my car doesnt overheat. but after driving for 45min and the the temp gauge still in the middle. i get the Engine Malfunction on the screen. i ran codes and i m getting code 2EE3. what do you advise? if i turn the car off it drives ok again.

@remonkamel3672 3 года назад

Hwy buddy have you found out whats the issue if you could please respond to me thank you

@hellrzr96 3 года назад

@@remonkamel3672 i had to bleed the coolant system . somehow the pump was not kicking in during the bleed process. i tried it 3 times and and on the 3rd time the pump kicked in and i was able to bleed the system. problem was fixed.

@hellrzr96 3 года назад

@@remonkamel3672 Make sure you check the bleeding process

@ThunderbirdRocket Год назад

Nice 👍🏼 !!

@ZHPBrent 3 года назад

🔥 just used this for my 335i Thanks

@julioochoa7108 2 года назад

I have a bmw 318 ti, I changed the radiator, the water pump and the thermostat, everything works fine, the fan turns on normally, but the temperature does not show on the dashboard, can you help me

@aaronacosta8104 3 года назад

Does this fix refill coolant level sign I went to get my 328i pressured checked and there are no leaks and the flow is good. Mfs tryna charge me 400 to replace it

@mauricemcmillian1791 Год назад

Did you figure out a fix?

@alonsoamezcua2386 2 года назад

Is this the same as the Direct Ozone Reduction Catalyst Temperature Sensor

@es2458 3 года назад

For a 2014 335i f30 will this be the same? Could somebody point me to directions on how to replace that cts?

@yocris2195 4 месяца назад

Did it help out bro? Was it the same??

@es2458 3 месяца назад

@@yocris2195 another issue came up that I couldn't fix so I took it too a shop sadly, typical old bmw crap. Best of luck

@michaelthomas6398 3 года назад

I have a 57 plate 320d se. where do I find the coolant temperature sensor ?

@masterquees 2 года назад

Is above the egr !

@AtifKhan-ir7oe 2 года назад

Same here

@hectornuno5065 2 года назад

I replaced buy from autozone and still have the problem cuestión need bmw sensor ?

@Everybodyshinetogether1 Год назад

I gotta bleed the system first?

@bfprecords 3 года назад

Does this procedure fix the p0126 engine code?

@jessemaiwald2794 3 года назад

Would this keep it from starting?

@devindoucette9145 2 года назад

I replaced the engine coolant temperature sensor but it still isn’t reading the temperature, any suggestions?

@DavidAparicio-wi2xk 2 года назад

Thermostat

@antof1235 3 года назад

Thanks guys.

@lysachanelbosku4036 3 года назад

My car bmw e36 m40 1.8...always heating on the relay fuse box relay n fuse always hot...2 more then time hot n my temperature is always upper level half meters...what the solution...radiator ok,fuse i change new,relay i change new but still hot...if my temperature more then half my relay n fuse hot n heat....help me for the solution...