Тёмный

Copex S-Wing 1000 tonne shear working 

Mark Schofield
Подписаться 1,7 тыс.
Просмотров 2,9 тыс.
50% 1

This is a longer clip, well, it’s a lot of clips actually, I’ll see how the longer clip is accepted and might go back to slightly shorter ones, we’ll see. I was limited with the angles I could film as I was operating the shear and the Sennebogen on my own mostly because we’ve been a man down for a while.
There’s a 40 foot curtain sider chassis that was driven in the previous evening going through the shear first, after I’d stripped the roof and wooden floor first. I bale some stainless steel, shear a very heavy loading dock in half. I didn’t want to cut the rams of the loading dock so I pushed it through the shear head until the three rams were beyond the blades and then cut it in half, it was small enough to load out. The alarm sound you here is a pre start warning to clear the area as the engine is about to start. There’s some general activity in the yard, wagons tipping etc, I’ll try and vary the content. I’m pretty strapped for time usually but I am trying to answer your questions.

Приколы

Опубликовано:

 

5 июл 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 7   
@henrydraper-yy1we
@henrydraper-yy1we Год назад
Great scrapyard some very good machines very enjoyable
@paulamoor3098
@paulamoor3098 Год назад
love the longer versions! can we see more of the other things going on as well? Trucks loading and unloading? It is all very interesting. I really enjoy your videos Mark. The sound of the shear cutting things, how the things fall. Totally fab!
@joecapo8292
@joecapo8292 5 месяцев назад
Good evening, you have put a lot of time and effort into designing your company. As well as the expense. You should be very proud of your efforts. There is always a need for an operation like yours. My best to the success of your business, Joe Capo.
@sven-olovhansson4835
@sven-olovhansson4835 Год назад
Perfect work and video Thank you
@RogowskiBubba0864
@RogowskiBubba0864 Год назад
Thx for the video, have a nice weekend 😎
@nlo114
@nlo114 Год назад
Have you fixed those grease lines yet? 🙃
@markschofield9494
@markschofield9494 Год назад
😂 Give me chance, I have to sleep at some point you slave driver. There are a couple of hydraulic lines that need a bit of rubber cable tying around them just to be on the safe side. I actually pressure washed the whole lower half of the shear, including inside the base, all of the pipes etc. We had a strong easterly wind for two months that blew all of the dust and crap back over the shear and its base, it was caked underneath, I’ll get a lot less filthy when I get under there to sort the pipes out now, I transferred the crap from the machine to myself, I looked like an oily rag 😂
Далее
Copex S-Wing 1000 tonne shear
12:27
Просмотров 6 тыс.
Sennebogen 817E Timber Handler Felling Mature Tree
14:47
Этот Пёс Кое-Что Наделал 😳
00:31
Лайфхак для дачников
00:13
Просмотров 17 тыс.
O-Zone - Numa Numa yei на русском!🤓
00:56
Просмотров 122 тыс.
How Grain is Sold at the Elevator
28:39
Просмотров 24 тыс.
Best Of Customer States 2024 So Far
31:31
Просмотров 404 тыс.
Copex S-wing 1000 tonne shear
17:05
Просмотров 6 тыс.
Scrapyard action at JB Schofield’s
22:18
Просмотров 18 тыс.
Copex S-Wing 1000 tonne shear
18:32
Просмотров 8 тыс.
тгк: ПРОСТО МОСТАК
0:15
Просмотров 478 тыс.