Тёмный

Cordless Drill and Tool Storage Rack - Shop Organization 

Make Build Modify
Подписаться 202 тыс.
Просмотров 143 тыс.
50% 1

Easy Cordless Tool and Cordless Drill Storage Rack
In this video I make a very simple cordless tool storage rack. I have seen many different types of cordless tool storage and often (in my opinion) they are over complicated. Tool storage should provide three basic benefits: accessibility, organization, and compression (saving space). These three are present to varying degrees in any storage solution. The ideal balance is relative to the tools and the work that will be performed. Organization may be paramount, and because of this, the tools will be packed away, highly compressed, hindering accessibility. Sometimes, like in the case of this cordless tool rack, accessibility is more important than compression. There are some very good solutions for bar clamps that manage to find a nearly optimal balance between the three. I won't go into it here, maybe in another video. ;)
SAWS AND CUTTING:
- Table saw amzn.to/2dQSrs1
- 80 tooth finish blade amzn.to/2dIteUO
- Japanese woodworking Hand Saw amzn.to/2dqe2Mg
- Makita Chop saw amzn.to/2dItFyf
- Porter Cable Router amzn.to/2y7cDSe
- Milwaukee Super Sawzall amzn.to/3hnYwMH
DRILLS, BITS, ROUTERS, and DRIVERS:
- Drill Press amzn.to/2cNOVCb
- Milwaukee Drill combo Kit amzn.to/2cOGXaH
- Forstner bits amzn.to/2dtXYFE
- Countersink Drill Bit amzn.to/2y7baLF
PENS/PENCILS AND MARKING:
- Mechanical Pencil amzn.to/2dB6X71
- Sharpie Marker amzn.to/2edfD5H
RULERS AND SQUARES:
- Tape measure amzn.to/2ddgDDW
- Swanson Speed Square amzn.to/2eE8BqC
NAIL GUNS AND NAILS
- Porter Cable 18 gauge nail gun amzn.to/2dHQnRU
GLUES, ADHESIVES & TAPE
- Wood glue amzn.to/2dQSbsU
(Amazon affiliate links help support the channel at no cost to you)
FOLLOW:
RU-vid: / makebuildmodifytv
INSTAGRAM: / makebuildmodify
FACEBOOK: / makebuildmodify
FACEBOOK GROUP: / makebuildmodify
TWITTER: / makebuildmodify
WARNING:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Always think ahead. Every project you try is at YOUR OWN RISK.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Хобби

Опубликовано:

 

6 сен 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 165   
@johnnychingas7573
@johnnychingas7573 2 месяца назад
So far this is the best and simpler than most other organizers
@Makebuildmodify
@Makebuildmodify 2 месяца назад
Thanks!
@TheFishingPilot
@TheFishingPilot 3 месяца назад
much simpler than some of the other designs out there. no need to over complicate a simple solution for a simple problem. Very nicely done.
@Makebuildmodify
@Makebuildmodify 3 месяца назад
Thanks!
@ScottHebert604
@ScottHebert604 3 года назад
This is brilliant. I am really impressed by the simplicity/function of this design, it's making me wonder why I haven't seen it before!
@Makebuildmodify
@Makebuildmodify 3 года назад
Thank you very much! Yeah, it's seems to me that many many people over complicate tool storage.
@BruceAUlrich
@BruceAUlrich 3 года назад
No need to overcomplicate. That's so true! Thanks for sharing, Justin!
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks Bruce!
@factionfx
@factionfx Год назад
what a simple but awesome build. picked up several tricks in there...forstner bit,tack before screwing, etc.
@Makebuildmodify
@Makebuildmodify Год назад
Thanks!
@russellmm
@russellmm 2 года назад
I love the simplicity of this! nicely done
@Makebuildmodify
@Makebuildmodify 2 года назад
Thank you!
@robertbrady3783
@robertbrady3783 3 года назад
A simple problem should have a simple solution! That's the mantra of our shop engineers, anyone can design a complex solution running up expenses and space. The real engineering that takes skill is makings simple and less complex solutions to the problem. Great Job!
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks Robert! I totally agree.
@Buckinghamrabbit
@Buckinghamrabbit 2 года назад
Love a simple and effective approach- and I appreciate your understated video construction. Normalize eschewing long intros and “RU-vid Voice.” Y’all know what I mean by that particular type of RU-vid cadence and vernacular featured in 85% of creator driven channels- especially diy ones lol
@Makebuildmodify
@Makebuildmodify 2 года назад
I appreciate that!
@psomlo
@psomlo 3 года назад
Very nice job, Justin - great to see someone who's not overthinking it.
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks!
@texasbtc
@texasbtc Год назад
After so many videos, THIS IS THE ONE. I can't wait to build this! Thank you sir.
@Makebuildmodify
@Makebuildmodify Год назад
You're welcome!
@zxborg9681
@zxborg9681 Год назад
Wow, I really like this. Beautifully simple.
@Makebuildmodify
@Makebuildmodify Год назад
Thank you! 😊
@crocket1042
@crocket1042 Год назад
This is great and I want to give kudos for the outstanding, yet simplistic, oral instuctions given by the builder! Thank You!!
@Makebuildmodify
@Makebuildmodify Год назад
Thank you! I really appreciate it!
@johnwhitley8562
@johnwhitley8562 Год назад
Awesome setup. And so easy. Thanks for sharing!!
@Makebuildmodify
@Makebuildmodify Год назад
Thanks for watching!
@terminalvelocity6398
@terminalvelocity6398 3 года назад
Appreciate your simple, common sense solution to a universal problem.
@Makebuildmodify
@Makebuildmodify 3 года назад
You bet! Thanks for watching.
@wireworks616
@wireworks616 2 года назад
Was looking to make something for my handheld tools and yours is the simplest. Thanks
@Makebuildmodify
@Makebuildmodify 2 года назад
Very welcome!
@johnturley1389
@johnturley1389 2 года назад
Really impressive! Nicely done! Glad i found this, excellent!
@Makebuildmodify
@Makebuildmodify 2 года назад
Thanks for watching!
@ramoncruz2235
@ramoncruz2235 2 года назад
Thanks for sharing. I'll make one this weekend for my tools.
@Makebuildmodify
@Makebuildmodify 2 года назад
Nice.
@diplayball
@diplayball 2 года назад
Thank you for sharing this with us. I just wanted something simple to do and I finally came across your video. Now I'm now why didn't I think of that 🤣🤣.
@Makebuildmodify
@Makebuildmodify 2 года назад
You are so welcome!
@brady2528
@brady2528 11 месяцев назад
Yahoo. I finally found the storage system I like. Great job.
@Makebuildmodify
@Makebuildmodify 11 месяцев назад
Yay! Thank you!
@e-train6402
@e-train6402 2 года назад
Very cool and simple. Thanks for sharing.
@Makebuildmodify
@Makebuildmodify 2 года назад
Thanks for watching!
@timmynguyen6121
@timmynguyen6121 3 года назад
Just what I’m looking for. Wood is so costly now during COVID and this this the most minimal as possible. Thanks so much
@Makebuildmodify
@Makebuildmodify 3 года назад
Glad to help.
@Lapeerphoto
@Lapeerphoto 3 года назад
Nice project - very clean!! I'm thinking of something similar in a portable caddy form. To use for my 4 angle grinders. (3 corded, 1 cordless). With flap/cut-off/grinding storage in the bottom. This gave me some good ideas to proceed. Thanks !
@Makebuildmodify
@Makebuildmodify 3 года назад
I'm happy to hear that my video helped with your design ideas. Thanks for watching!
@jhh243
@jhh243 3 года назад
Really well-created instructional video! Subscribed! You taught me a lot
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks for the sub!
@marcel1016
@marcel1016 3 года назад
Just subscribed !! love your work and video. Anxious to see more! Thanks
@Makebuildmodify
@Makebuildmodify 3 года назад
Awesome, thank you!
@jwoods2215
@jwoods2215 Год назад
Thanks for the vid. This is so simple, but brilliant!
@Makebuildmodify
@Makebuildmodify Год назад
You're welcome!
@nigelthornton7378
@nigelthornton7378 3 года назад
Nice idea , saves plenty of space too
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks!
@rhyllested
@rhyllested Год назад
Great video! This is exactly what I was looking to build.
@Makebuildmodify
@Makebuildmodify Год назад
Glad I could help!
@rayaldridge2506
@rayaldridge2506 3 года назад
Really nice build. "A simple solution for a simple problem". That's my moto too. In my case, it's because I don't have the skills to do "complicated" yet. But simple is working fine for me. Thanks for sharing 👍.
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks!
@estebanstock3914
@estebanstock3914 3 года назад
Fantastic solution! Awesome! Thanks for share
@Makebuildmodify
@Makebuildmodify 3 года назад
You bet!
@joerunyan2438
@joerunyan2438 3 года назад
Great storage saver! Thanks for sharing!!!
@Makebuildmodify
@Makebuildmodify 3 года назад
You bet, thanks for watching!
@kellyclayton8225
@kellyclayton8225 Год назад
I copied your design for the most part, and mine came out perfect. Good job, and keep making those videos.
@Makebuildmodify
@Makebuildmodify Год назад
Awesome! Thank you!
@bheemar9128
@bheemar9128 3 года назад
You did earn it bro very simple and effective
@Makebuildmodify
@Makebuildmodify 3 года назад
Thank you!
@Tdub66
@Tdub66 3 года назад
Good job my man👍🏽😎
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks for the visit
@naskov5819
@naskov5819 2 года назад
Very nice build. Video was well done. Explanations of each step were clear. Great job. Subscribed and I’m going to use this for my tool wall. One suggestion would be to explain how you determined the width of the holes and the depth of the hanger. Otherwise, excellent job. Thank you.
@Makebuildmodify
@Makebuildmodify 2 года назад
Thanks for the sub! Yeah, I could have explained that a little better. I figured that everybody's tool selection is different and my particular slots might not fit. But I could have at least gone over how I arrived at the dimensions.
@jasonbailey9139
@jasonbailey9139 3 года назад
Quite timely for me as I’m working on storage in my garage right now. My only issue is that I’ve got several Milwaukee M12 took that don’t have those feet. I suppose I could hang them the other way.
@Makebuildmodify
@Makebuildmodify 3 года назад
Yeah, that should work. It's an easy experiment to do. If it doesn't work it's not much time lost.
@K9shibby
@K9shibby 2 года назад
Dope, going to go build it now.
@Makebuildmodify
@Makebuildmodify 2 года назад
Nice!
@JakeandEmmysDadWorkshop
@JakeandEmmysDadWorkshop 3 года назад
Love it! Keep making these great vids
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks man.
@danthemakerman
@danthemakerman 3 года назад
I've been trying to organize my workspace and make it so the tools I use regularly are easily accessible as well as easy to put away. I should probably make something like this.
@Makebuildmodify
@Makebuildmodify 3 года назад
I've been doing the same. Anything that I haven't use for a while goes in the toolbox. Then I move something that I've been using to the more accessible location. It never stops, but I think I'm getting close to an optimal arrangement for what I do. I use about 20% of my tools 80% of the time.
@brennanvivaan2290
@brennanvivaan2290 2 года назад
you probably dont give a damn but does someone know a way to log back into an Instagram account..? I was dumb forgot my login password. I appreciate any assistance you can give me!
@hectorkayden2424
@hectorkayden2424 2 года назад
@Brennan Vivaan Instablaster =)
@brennanvivaan2290
@brennanvivaan2290 2 года назад
@Hector Kayden i really appreciate your reply. I got to the site thru google and I'm in the hacking process now. Looks like it's gonna take a while so I will get back to you later with my results.
@brennanvivaan2290
@brennanvivaan2290 2 года назад
@Hector Kayden It worked and I now got access to my account again. I am so happy:D Thanks so much, you really help me out !
@gregsb3454
@gregsb3454 3 года назад
Great design
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks!
@joem.7621
@joem.7621 3 года назад
Great idea!
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks!
@jessecarrillo7117
@jessecarrillo7117 Год назад
Thank you Sir for the instructions how to it right, very well explained thank you Sir
@Makebuildmodify
@Makebuildmodify Год назад
You are very welcome
@jessecarrillo7117
@jessecarrillo7117 Год назад
@@Makebuildmodify yes Sir I already built it and installed it in my closed in trailer and it even worked on some of my pneumatic nail guns to thanks again 👍👏👏👍
@Makebuildmodify
@Makebuildmodify Год назад
@@jessecarrillo7117 Nice!
@offroadman250
@offroadman250 Год назад
nice work.
@Makebuildmodify
@Makebuildmodify Год назад
Thank you! Cheers!
@daniel923e
@daniel923e 3 года назад
Nice build, we can also see you like Milwaukee. :)
@Makebuildmodify
@Makebuildmodify 3 года назад
Haha, yup good tools. #notsponsored ;)
@stevestudley5685
@stevestudley5685 5 месяцев назад
I learned something. Thank you.
@Makebuildmodify
@Makebuildmodify 5 месяцев назад
You're welcome
@haroonahmedchaudhry1077
@haroonahmedchaudhry1077 2 года назад
nice and easy,,,,thank you
@Makebuildmodify
@Makebuildmodify 2 года назад
You are welcome!
@parkeranderson5074
@parkeranderson5074 3 года назад
Thanks gargamel😀
@Makebuildmodify
@Makebuildmodify 3 года назад
Lol! You're welcome.
@plutogonewild129
@plutogonewild129 4 дня назад
AWESOME
@Makebuildmodify
@Makebuildmodify 3 дня назад
Thanks 🤗
@spenzo144
@spenzo144 4 месяца назад
nice. love the simple design and relatively short video. i feel like 6.5min is the perfect length for a video. one thing; isn't it dangerous to not having a rivving knife with the table saw? just looking out. cheers
@Makebuildmodify
@Makebuildmodify 4 месяца назад
Thanks. Making things is always dangerous. It's the personal responsibility of maker to decide the level of safety that they are willing to adopt. Also, to a point, the same operation can be more or less dangerous relative to the maker and their level of experience.
@grandpasgaming5232
@grandpasgaming5232 3 года назад
Thank you.
@Makebuildmodify
@Makebuildmodify 3 года назад
You're welcome!
@loulupero4147
@loulupero4147 3 года назад
Look good,. I am going build for new shop. 👍
@Makebuildmodify
@Makebuildmodify 3 года назад
Right on!
@loulupero4147
@loulupero4147 3 года назад
What would you recommend ? ?
@coupons420
@coupons420 Год назад
Nice!
@Makebuildmodify
@Makebuildmodify Год назад
Thanks!
@TheVineyardFarmhouse
@TheVineyardFarmhouse 3 года назад
You earned it
@Makebuildmodify
@Makebuildmodify 3 года назад
Awesome! Thanks for the sub!
@acrova
@acrova 3 года назад
Just what i need
@Makebuildmodify
@Makebuildmodify 3 года назад
Glad you found it.
@dogwoodtales
@dogwoodtales 3 года назад
Nice! However one concern I might have is dust settling into the contacts of the rarely used tools. Maybe put a dust cover over those. Sorry - I’m a bean counter who probably should have been an engineer 😜
@Makebuildmodify
@Makebuildmodify 3 года назад
Maybe, but I put more dirt into my tools during use than while on the shelf.
@bnolsen
@bnolsen 2 года назад
So 3" support and 2" gaps for the plywood section, making the hole spacing 5" correct?
@Makebuildmodify
@Makebuildmodify 2 года назад
The 3" measurement is the depth of the notch. The notches are 2 inches wide with a 2-inch separator. So, drill a 2 inch hole every 4 inches.
@NJroute22
@NJroute22 Месяц назад
Excellent all around - have been making some of your projects without a table saw - just using a hand-held circular saw. Not as fancy - but gets the job done. How come you stopped making videos? Or do you have another channel anywhere? Either way - thank you!
@Makebuildmodify
@Makebuildmodify Месяц назад
It's great to hear that somebody is making my project! I'm considering starting back up again. I had to go back to my day job. I'll probably have to take sponsors to continue though.
@NJroute22
@NJroute22 Месяц назад
@@Makebuildmodify Do you get decent monetization with YT? Either way - I think your presentation style is perfect. Way above most others. No hand-holding. Too many other channels are over-explainers, etc. Don't you think that if you pick up again - your subscriber base will grow rapidly? I think others are also yearning for more straightforward makers like you. You might be surprised?
@Makebuildmodify
@Makebuildmodify Месяц назад
@@NJroute22 Thank you for the encouragement, I really appreciate it. The YT monetization typically does not cover the production costs of a video. Over time, some videos will pay well enough to limp the channel along, but if I want to do it full time (my dream), I'd have to take on sponsors. It used to be more commonly viewed as a taboo (sellout) type of thing. Times have changed, and I'm reconsidering my position on in-video adverts.
@NJroute22
@NJroute22 Месяц назад
@@Makebuildmodify Very interesting. Do you pay someone to make your videos? I have a channel (not monetized) - and my production costs are zero (other than the few hours it takes to make). Are you basing your costs on time/value? In other words - you make more working a "in real life" job over doing virtual things? I do have to say one more thing though - when I am building things at home - it kind of sucks to "do it for the camera" rather than just building it for myself. It'd be nice to have a film crew film for me while I concentrated on my project.
@Makebuildmodify
@Makebuildmodify Месяц назад
​@@NJroute22I do it all myself. My bigger projects can consume 40-60 hours plus the cost of materials. I lose a week or more of income from my day job. So, the real lifestyle cost is pretty substantial considering that I was trying to produce one project video per week. Moving forward, I'll have to do maybe one project per month and more talking head videos to fill in the month-reviews, tips and tricks, and things like that. Maybe even a "Maker Week in Review" where I cover other makers' projects.
@loulupero4147
@loulupero4147 3 года назад
Any recommendations, I don’t have drill press? Thanks
@Makebuildmodify
@Makebuildmodify 3 года назад
You can use a hole saw and a drill.
@Kid617
@Kid617 2 года назад
U said cut the plywood to 8 inch wide how far in did u cut in this looks easy looking to do this
@Makebuildmodify
@Makebuildmodify 2 года назад
the center of the drilled holes are 3" from the edge.
@Pete.Ty1
@Pete.Ty1 3 года назад
😊👍
@Makebuildmodify
@Makebuildmodify 3 года назад
👍
@ahmadsultani5623
@ahmadsultani5623 2 года назад
How size drill bit did you use for driving the big holes ?
@Makebuildmodify
@Makebuildmodify 2 года назад
2" or about 50mm
@trevorburford-reade8685
@trevorburford-reade8685 3 года назад
You made a giant comb.
@Makebuildmodify
@Makebuildmodify 3 года назад
Haha, yeah, a giant tool comb.
@diplayball
@diplayball 2 года назад
New subscriber. Hope that you're going to still be making new videos 😊
@Makebuildmodify
@Makebuildmodify 2 года назад
Thanks for subbing! I want to make more as soon as I can. I have a day job that takes a lot of my time.
@BorgDrohn
@BorgDrohn Год назад
How do the contacts on your machines Look after hanging them upside down?
@Makebuildmodify
@Makebuildmodify Год назад
Nothing deleterious has happened to the contacts since I've been storing them this way.
@djflakofresh
@djflakofresh 3 года назад
Great video, would of love if the plans were in here :/
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks! It's pretty simple to build. The video pretty much covers everything that plans would show. the hole size and slot count will vary depending on your tool selection.
@bernhardtammen4463
@bernhardtammen4463 3 года назад
Sehr schön Und Heimwerker freundlich
@Makebuildmodify
@Makebuildmodify 3 года назад
Danke!
@loulupero4147
@loulupero4147 3 года назад
What bit did you use for screws?
@Makebuildmodify
@Makebuildmodify 3 года назад
Used dewalt countersink bits. amzn.to/2OFTO3G (affiliate link)
@loulupero4147
@loulupero4147 3 года назад
@@Makebuildmodify 👍
@renee2005
@renee2005 2 года назад
🥰
@Makebuildmodify
@Makebuildmodify 2 года назад
🙂
@stephaniefrandsen2088
@stephaniefrandsen2088 2 года назад
Awesome video! My garage has been a complete disaster with tools, scrap wood, paints etc. We can thank my unorganized a$#* and the pandemic lol jk. But this video encouraged me to start organizing our garage. Thank you.
@Makebuildmodify
@Makebuildmodify 2 года назад
You bet! happy to be a source of inspiration!
@stephaniefrandsen2088
@stephaniefrandsen2088 2 года назад
@@Makebuildmodify Make more videos please. Especially for craft room organization 🤣😅
@Makebuildmodify
@Makebuildmodify 2 года назад
@@stephaniefrandsen2088 I wish I could. I'm a full time builder. So, not a lot of extra time. I make videos when time allows. Thanks for watching my stuff!
@rkooscar6866
@rkooscar6866 Год назад
What type of plywood is that
@Makebuildmodify
@Makebuildmodify Год назад
I'm not sure. I think that it was taken from some old cabinets that salvaged.
@TheHandystanley
@TheHandystanley 3 года назад
Knew there was a reason I liked you....GO MILWAUKEE....!! LOL
@Makebuildmodify
@Makebuildmodify 3 года назад
Thanks Stan. Now, if I could only get a sponsorship from them.
@joselofarias2088
@joselofarias2088 3 месяца назад
What size is the holes
@Makebuildmodify
@Makebuildmodify 3 месяца назад
2 inches in diameter.
@61spindrift
@61spindrift 3 года назад
Easy, almost free and does the job? Here...hold my beer.
@Makebuildmodify
@Makebuildmodify 3 года назад
Ha! I got ur beer.
@Makebuildmodify
@Makebuildmodify 3 года назад
FIRST!!
@Makebuildmodify
@Makebuildmodify 3 года назад
Wut!?!
@Pete.Ty1
@Pete.Ty1 3 года назад
@@Makebuildmodify 😂😁👍
Далее
Drill Station: Simple and Easy Shop Project
9:31
Просмотров 91 тыс.
A Better Tool Storage Cabinet | Shop Organization
13:46
Drill/Driver Hanging Station
8:23
Просмотров 5 млн
DIY Battery Charging Station: Easy and Effective
9:40
Cordless Drill Charging and Storage Rack
15:28
Просмотров 922 тыс.
How to make killer shop storage (w/out pegboard)
16:50
Просмотров 621 тыс.
Wall Mounted Tools Storage  with Charger [Woodworks]
11:03
A Better DIY Drill Charging Station | Shop Organization
13:38
Поры выходят наружу
0:48
Просмотров 3,6 млн
Dad builds Foam Pit Jump! 😲
1:00
Просмотров 119 млн
great#shanpehlwan#shorts
0:19
Просмотров 1,8 млн