Cordless Drill Chuck Removal

Подписаться 75 тыс.

Просмотров 476 тыс.

50% 1

Amazon links:
RÖHM Extra RV80 Keyless Chuck RV 80 1.5-13 mm Socket 1/2 Inch Metal www.amazon.com...
CHUCK JACOBS 400 SERIESNON CARB www.amazon.com...
Keyless Drill Chuck Extra50-RV13 Röhm 1322450, for Milwaukee, 1/16"-1/2 Clamping Capacity, 9/16"-18 Mount www.amazon.com...
1/2"-20 Rohm Keyless Chuck: www.amazon.com...
3/8"-24 Rohm Keyless Chuck: www.amazon.com...

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 363

@shawn576 4 года назад

Thanks for sharing. One tip is that you can use an impact driver to tighten or loosen the screw inside the drill chuck. This way you won't risk anything grabbing, smacking you in the face, etc. Drills are probably in the top 3 causes of testicle-related injuries.

@AroundTheHome1 4 года назад

Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org/

@bigoljohn3313 2 года назад

Exactly what I was thinking :)

@wrblue08 2 года назад

Yesterday I was trying to twist off the screw with a screwdriver till my skin almost came off. Then I mounted a flat head bit to my mid torque impact wrench and it loosened with just a flinch of the trigger.

@cyeelai1852 2 года назад

Curious, What are the other top 2?

@cjjuddaustralianartist Месяц назад

Hey thanks, you saved me from having to buy a new drill. I was on the verge of throwing mine out, as I've never been able to remove a chuck before. The allan key trick did it. Also as a bonus, once the chuck came out, I was able to fix the three grippers that had partially jammed for some reason. Luckly, they jammed wide enough to take the allan key. Back to normal now, no money spent. Many thanks mister. Much appreciated.

@AroundTheHome1 Месяц назад

You are welcome!

@willscott6326 4 года назад

Brilliant thanks

@AroundTheHome1 4 года назад

Glad to help. Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@SirFeatherfoot Год назад

This video may be 5 years old. But it's still useful to me today. Thanks for the no fluff content. It's much appreciated.

@AroundTheHome1 Год назад

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@marlagoode7099 9 месяцев назад

Your Cool......Explain well for a Lady with no Man to Help at Home ......Thanks. .....😉

@AroundTheHome1 9 месяцев назад

Happy to help!

@ladeda7033 4 года назад

Nice, thanks for the helpful video. Saved me some headaches . Just a little help there.... When you show something to the camera try holding it very still so our eyes can adjust, second hold it in place twice as long as you think nesessary. It gives US time to look, focus, and study without getting agitated about missing the picture. David west fire videos has this technique mastered. 👍 Again thanks for you taking the time to make educational videos ! Much appriciated!

@AroundTheHome1 4 года назад

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@bjhonusa 3 месяца назад

Very simple and efficient. I am watching you tube due to creaters like you. ❤❤❤❤❤❤

@AroundTheHome1 3 месяца назад

Thank you so much 😀

@TheWinger1008 4 года назад

Nice! You just saved me a bunch of time. Thanks for taking the time to make this video.

@AroundTheHome1 4 года назад

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@victoryfirst2878 2 года назад

I have a 1/2 inch magnum drill motor 5.5 amps that uses a keyless chuck. That uses the best keyless chuck. They should of used that chuck in there heavy duty cordless drill. They are just making things a lot cheaper these days. But the price is does not go down.

@AroundTheHome1 2 года назад

You are right. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@victoryfirst2878 2 года назад

@@AroundTheHome1 Thanks for the confirmation and will watch more of your videos Sir.

@victoryfirst2878 2 года назад

@@AroundTheHome1 Can you tell me if my Porter Cable drill motor 18 volts can get a replacement drill chuck that is of high quality ?? My chuck does not hold drill bits firmly. Can I purchase a high quality one from say Jacobs ??? Thanks

@KRSBU 5 лет назад

Thanks for the video which is very helpful. My only comment is, circa 3’ 10” in, I would not suggest placing any tool under torque anywhere near the groin area, as it could lead to painful consequences, or worse, injury. Better to put the mole grips in a vice.

@AroundTheHome1 5 лет назад

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@markfrenzel4718 10 месяцев назад

Fantastic! My dad and I were scratching our heads for a minute until he said “just RU-vid it”. And here I am. Took us 2 minutes after that. Thanks for the video!

@AroundTheHome1 10 месяцев назад

Glad you enjoyed it!

@andrewmarsh4920 2 месяца назад

I busted my middle finger after taking the screw out and attempt to use the vice-grip and the biggest hex key (6mm) that I could find my hands on. The vice grip slipped and by the time I had noticed the hex key had already struck my finger. Tip 1. after taking out the screw use wd-40 and wait 15mins for it to soak into the chuck's rod and it will come apart easily. 3 weeks until my finger heals. It's just a scratch still but I wanted to avoid it altogether. Use a decent pair of gloves too.

@dakSRT 2 года назад

Good video. I have 2 Milwaukee drills.. one for work and one for home that I wanted to swap chucks.. This is definitely not as easy as it looks. I could not get either chuck off. I got the screw out of one.. that's it.

@AroundTheHome1 2 года назад

Sometimes these things will fight you tooth and nail to get them off. If rust has started to build up inside the chuck, you are definitely in for a fight. Good luck man.

@rickanthony8259 3 года назад

Always thinking I can do things with no assistance! This video shows lots of ways to assist a stubborn chuck! Don't tell my kids I didn't know how! Now I do!!!

@AroundTheHome1 3 года назад

Don't worry, I won't tell. So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@justice4all997 Месяц назад

When I'm in reverse my chuck spills off. any help???

@torodaman 3 года назад

But my chuck won't get tight on nothing that's why I need to replace it, so im gonna have to try the hammer method? Update: Got my Milwaukee one key hammer drill fixed by Milwaukee it was still under warranty, They actually replaced more than the chuck, is like a new $200dls drill now, I'm glad I decide it to take it to the Milwaukee shop.

@jamesmiddleton5304 3 года назад

Yeah that's my problem as well ..

@crazykittenvideos855 2 года назад

Thanks man! Just took a decent Chuck off a cheap drill where the battery was dying. Hoping that the thread will match an old corded drill I have with a key. Keyless is just a whole lot nicer for low torque jobs like the softwoods I tend to use. Thanks again

@AroundTheHome1 2 года назад

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@5850Corazon 3 года назад

Thank you, outstanding presentation! I hadn't considered using the strength of the drill itself to do the work. Thanks again.

@AroundTheHome1 3 года назад

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@claudegoldstein2788 3 года назад

Nice video helped me out! Ready to replace the crap chuck that came w my Hitachi cordless

@dougdroen7519 9 месяцев назад

How would u break it loose if the screw inside the chuck is a revet instead of a screw....

@bencapps5509 Год назад

Unfortunately both those links lead to items that are unavailable.

@jimbo3267 4 месяца назад

Your very detail video saved my Harbor Freight Hercules 1/2" 20V Model HC92K1 drill which sold for $120. It was advertised as "comparable" to the Dewalt drill and a compatable chuck sells for $16 on Amazon that one reviewer indicated it fit Hercules. My drill's chuck would open to full width but would not tighten enough to hold any drill less that 1/4". The screw in the chuck was a Toric 15 and it turns out that it was very loose. I tighten the screw (left threads) and now it works just fine and no new chuck needed.

@AroundTheHome1 4 месяца назад

Glad to help

@kuntakoolkinte4242 5 лет назад

Nicely explained. Your Calm relaxed attitude helps too. Thanks

@AroundTheHome1 5 лет назад

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@danielshelton9724 4 месяца назад

Thank you! I just did this after watching your video and swapped out my Chuck with a older drill that had burned out and it worked great now. Thank you for the content!

@AroundTheHome1 4 месяца назад

Glad it helped

@stephanelacroix9426 4 года назад

nice idea, good job, but think to protec your boddy parts by gloves, boggles, leather apron before remove the jaw chuck or any else works!

@dazzalaff1967 3 года назад

Hahahahaha safety officer, pull your head in..back yard job..

@rrohret21 9 месяцев назад

It may also work with a Robertson driver/bit.

@passiton3801 6 лет назад

Wonder if he's broken any fingers yet, this practice is highly dangerous, in the wrong hands.

@AroundTheHome1 6 лет назад

No broken fingers. Not even a sprained finger. And everything that I do is dangerous in the wrong hands....

@passiton3801 5 лет назад

Too rite it is....

@vladster264 3 месяца назад

Thank-you! 🙂This is what I need, to loosen my chuck-and unfortunately maybe even replace it. I do agree, that does suck! For Milwakee to replace the chuck size.

@AroundTheHome1 2 месяца назад

Glad to help.

@timucinbahsi445 27 дней назад

nice. just the right amount of details. saved me a lot of time and possibly breaking my drill

@AroundTheHome1 26 дней назад

Glad it helped!

@Maggi9909 Месяц назад

Im starting to think who ever did the service on my drill the first time Epoxied the chuck onto the drill. The thing is ON there

@AroundTheHome1 Месяц назад

Whoa, that's not cool

@PDjargon 4 месяца назад

Thank you for this video as I could not for the life of me find a drill that had a chuck to accept anything above 10mm but plenty of chuck replacements that could. I thought it would be possible to switch it out but man the drill chuck did not want to let go of the drill..makes me think that they really don't want you do switch them out yourself since it moved my arm at a few points. But again your video made me keep on going and I've gotten it off just need to get the replacement chuck on now.

@AroundTheHome1 4 месяца назад

Glad to help

@andyZ3500s 5 лет назад

Rohm makes excellent products. $ 44.90 might seem expensive but when your cordless goes out you can take the chuck off and put it on your replacement drill. If Milwaukee is using a odd thread so you have to buy there replacement chucks that is just going to turn me away from them. I have Milwaukee tools that I bought new 30 years ago and some my dad and grandfather bought that still work fine. But when companies start doing things like that I'll spend my money somewhere else.

@AroundTheHome1 5 лет назад

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@Dm-dk9zp 2 года назад

I was going to buy a new drill but thought I’d check out RU-vid, that’s what was wrong with my drill!!! You just saved me $200.00 dollars!!

@AroundTheHome1 2 года назад

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@jaydee3046 Год назад

My Craftsman model CMD710 needed a new chuck. went online for warranty replacement, and was sent a brand new drill, and charger. I figured "score" for me and ordered a new chuck figuring to gift out the new one. Used the craftsman site, and the chuck is available. Now things got interesting. Found out my drill has nothing to unscrew. Nothing there but what looks like the end of a shaft. The thread on the new chuck (ordered from Craftsman site) is regular direction. So how am I supposed to get off the old chuck? Do the same thing as normal with something in the chuck and whack it?

@AroundTheHome1 Год назад

I think so. Every drill I have had has a locking screw inside, but there is always a new model that changes something.

@sergeydanilov 12 дней назад

Brilliant video. Thank you ever so much.

@AroundTheHome1 12 дней назад

Glad you enjoyed it!

@Eddie-In-Las-Vegas Год назад

Amazon says no longer available and doesn't know when it will be. Can you recommend a similar decent chuck replacement for this drill in 2023?

@AroundTheHome1 Год назад

Thank you for letting me know. I have updated the links in the video description with a few choices for you.

@testgames4028 Год назад

Thanks a lot man, you're brilliant. Very helpful video, it's how smart you work with things, not how much force you use or waste efforts and time. No damage or scratches or anything to the drill. Clean Work 👍.

@AroundTheHome1 Год назад

Thank you very much!

@PowerScissor 4 года назад

Explaining that's just the way you learned to use a chuck. Oh, and also, I break them all the time and am on my 3rd one. LOL. J/K. Good video, needed the info.

@AroundTheHome1 4 года назад

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@543bez 2 года назад

Put Allen key in and hit with small hammer. Won't budge. Then hit with large rubber mallet. Still nothing. Then hit it with a lump hammer, still nothing. Put drill on floor with Allen key angled about 3" off the floor. Stand on drill and repeatedly drop full weight of a sledge hammer on it. 3 hits it finally gave. 😂

@AroundTheHome1 2 года назад

Wow, and the drill survived?

@charlesscottkelly Год назад

Cheers I have a hitachi that is hopeless since new

@L1ghtstorm Год назад

Mimwaukee chucks suck on fuel drills

@martiniindustries 5 лет назад

Thanks for the video. I ended up using a breaker bar and the largest 1/2" drive hex bit that I could fit into the chuck, which ended up being a 7/16" hex for my 1/2" drive drill. I pinned the breaker bar and the drill against the ground and bumped the trigger to break the chuck loose.

@AroundTheHome1 5 лет назад

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@clerissonmesquita 3 года назад

Thank you so much for your invaluable information, highly appreciate it, keep it up the outstanding job, have a great day.

@AroundTheHome1 3 года назад

So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@scirocco51 Год назад

To loosen the screw, you said set the drill to forward position, that means the chuck will turn anticlockwise. Should it not be setting the drill to reverse position to loosen the screw? Please advice.

@AroundTheHome1 Год назад

This video is correct, at least for every drill chuck that I have worked with.

@yondego4733 2 года назад

Fellas, if you can tighten the chuck on the Allen wrench you don't have a problem in the first place. What if the chuck is stuck wide open?

@AroundTheHome1 2 года назад

Well actually chucks can loose their locking ability, slip, and get a wobble but still hold onto an allen long enough to do this. Obviously if yours is stuck open then you have a bigger problem. Hopefully yours has a metal sleave because the next thing I would suggest is to put a pipe wrench on it.

@martink4719 7 месяцев назад

If the screw is busted, could i drill it out? Mine is HILTI where can i find new screw for chuck

@AroundTheHome1 7 месяцев назад

Well maybe you could use an easy out or left handed drill bit.

@hasambition 5 лет назад

Thanks for the video. Exactly what I needed.

@AroundTheHome1 5 лет назад

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@skinnladen Год назад

Well, most people looking to remove that screw aren't gonna have such an easy job 😅

@AroundTheHome1 Год назад

Maybe not

@JudgeBuster Год назад

So what do you do with a Milwaukee 1/2 inch chuck that has the bit teeth stuck and the chuck just spins and nothing happens?

@AroundTheHome1 Год назад

I honestly don't know. I would love to try and take one of those off because you are not the only person with that problem.

@MuftakisWorld 4 года назад

hello the problem is my device has 2 chuck its black & decker cordless 14.4v driver/drill i have screwed out the screw so easily but the problem with the 2 collars after turn one it goes to point that stop and start turning the one behind it so i tried to use 2 wrench one fix one and another wrench to loose the another collar but here is the big problem it doesnt loose whatever i push it so how to replace this doomed chuck i am stuck now with broken jaw teeth??!!

@lm6036 5 лет назад

I've tried every method available on my Makita but it just won't come off.

@gorebad8110 4 года назад

Same here, AEG

@siamaklighvani3951 2 года назад

Great video , I found that Milwaukee chuck is not strong

@AroundTheHome1 2 года назад

They are not. 👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@zacharycaylor7006 Год назад

Hey, get this off of the Dewalt

@godfearingheathen 5 лет назад

Great video, thanks. Anyone watching this for instructions is surely not as experienced as you are. These are your target viewers. Best to have the allen key in the vise, short bursts of power with two hands on drill, one elbow down side depending whether removing/replacing to catch the kickback. No nasty injuries. You mentioned that the chuck is the weakest link but as the chuck is easily replaced sometimes it's better for it to break before the drill does. Thoughts?

@JoseGonzalez-uh7hw 2 года назад

. ..k. . . . .? . . . .

@JoseGonzalez-uh7hw 2 года назад

@mikesmusicden Год назад

Great video; thank you for taking the time to make it!

@AroundTheHome1 Год назад

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@stephensmyth6363 Год назад

Second time changing a chuck on a makita drill . First time was for a friend , the chuck was completely broken. Teeth were broken so couldn’t use an Allen key . Cut outside chuck casing with a grinder and locked a 24” pipe wrench on chuck to lock it and used a steel site box for mechanical leverage to spin the chuck off . Tried your method today and had no luck . But decided to just use the vice grips as leverage with the Allen key and it came off . Good video ,thanks !

@emmanuelsandoval4541 2 года назад

I have the same problem. Do you have the link for the new one?

@AroundTheHome1 2 года назад

Thank you. I just checked my link in the description and it was no longer good. Here are the updated links. 1/2"-20 Rohm Keyless Chuck: www.amazon.com/Rohm-893350-Extra-RV10-Through-Hole-Diameter/dp/B00DD7KGHY?crid=1UBSKNXQBLIZL&keywords=rohm+1%2F2-20+drill+chuck&qid=1656509535&sprefix=rohm+1%2F2%2Caps%2C102&sr=8-4&linkCode=ll1&tag=greatwhitenin-20&linkId=90c9f41675485fb455a264ec7b2cbecf&language=en_US&ref_=as_li_ss_tl 3/8"-24 Rohm Keyless Chuck: www.amazon.com/Rohm-893351-Extra-RV10-Through-Hole-Diameter/dp/B00DD7KPPC?pd_rd_w=oQZOH&content-id=amzn1.sym.c32bd24a-4ef0-4e42-bb31-8027e5f6a185&pf_rd_p=c32bd24a-4ef0-4e42-bb31-8027e5f6a185&pf_rd_r=T3J9BEZMRK71CC9MRFRK&pd_rd_wg=TNPdm&pd_rd_r=7afef2da-06bc-4e9b-9a45-23e87828fdb2&pd_rd_i=B00DD7KPPC&psc=1&linkCode=ll1&tag=greatwhitenin-20&linkId=b07919f067e98bf41c4b1d1b571bba9f&language=en_US&ref_=as_li_ss_tl Now, my drill uses the 1/2"-20 but there is also a link for the 3/8"-24

@MHumanoid Год назад

Unfortunately this didn't work for me. Drill doesn't have enough power at 55 nm, and whacking with a hammer won't get it loose. I can use raw force with extra leverage on the allen key, but it just seems to turn the chuck somehow. It's at speed 1, drill mode and in reverse. Any ideas?

@dillwiggle2 6 лет назад

I had a Makita drill that would not come off by hitting it with a hammer and allen key like the other videos showed. This one actually works ! Just make sure drill is in the lowest speed (1) for most breaking power and it is in reverse. Also I put the other end of the allen key in a vise. And USE 2 HANDS ON THE DRILL. It can tear your wrist off if you don't hold it very secure and with both hands. Another method that looks like it would work is using an air powered air gun with a hex bit in the drill and the drill in a vise.

@AroundTheHome1 6 лет назад

Thanks for watching, and I am glad to help. Don't forget to stop by our website www.greatwhiteninja.com

@glennjames1756 5 лет назад

EXCELLENT Video. Thank You sir

@AroundTheHome1 5 лет назад

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@machonsote918 Год назад

I shouldn't have watched the video so close to the screen, now I'm coughing just like you.

@edmoore2786 Год назад

Hi, great video. Any idea what the securing screw thread size is? Metric or imperial? Mine needs replacing!

@mohankrishnasamy1456 2 года назад

Thank you for your patience

@AroundTheHome1 2 года назад

No worries!

@MarcoPaganini 4 года назад

Re: Cheap chinese chucks, "I expected that out of a Ryobi or something": This is unsurprising since Ryobi and Milwaukee are both owned by the TTi Group, which is a Chinese manufacturer.

@tomwhite716 Год назад

What do you do if the Chuck stuck closed?

@AroundTheHome1 Год назад

Does the chuck grip turn and is it metal?

@publicaccount7246 Год назад

Wow a new screw that holds the chunk, no wonder it comes out so easy. Try one that's been on for a while or the teeth are stuck in the middle and can't get anything in!

@geoffg46 3 года назад

If that allen key slips out the grips, that's potentially your parental ability gone, risky way of doing it, put the key in a vice

@andrewrodriguez8492 Год назад

Mine isn't budging

@parwezalam2497 9 месяцев назад

Thanks very useful video

@AroundTheHome1 9 месяцев назад

Glad it was helpful!

@bluemantom77 6 лет назад

DeWalt uses a t. screw. Not Phillips head or flat I figure I point that out the other users

@AroundTheHome1 6 лет назад

Thanks for the tip. Thanks for watching, and I am glad to help. Don't forget to stop by our website www.greatwhiteninja.com

@Andrew-tg4jf 2 года назад

Can I use my drill to screw it only has the setting to make holes?

@peterbongiorno9302 Год назад

I unxerstand how to take off chuck, but my problem is the chuck does not spin to close up on a allen wrench. It is stuck open.

@AroundTheHome1 Год назад

Does the outer ring of the chuck hit a stop still or does it just spin?

@peterbongiorno9302 Год назад

@@AroundTheHome1 it just spins, there is a yellow ring between the chuck and drill.

@AroundTheHome1 Год назад

Ok, I was hoping that it didn't so that you could put a pipe wrench on it. Is there any part of the outer chuck that you can grab onto? Might have to break the ring off so that you can get a pipe wrench to hold on.

@shaun2049 5 лет назад

Thanks mate my chuck just went on my m12 drill video was great going to buy new drill now l can buy just the chuck

@AroundTheHome1 5 лет назад

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@snoopytheace4487 4 года назад

My m12 fuel hammer drill the chuck has gone bad twice. I'm taking it back to be fixed again. And my other Milwaukee drill clutch has gone bad.

@jomhartayaben93 2 года назад

Thanks, it works... 😍

@AroundTheHome1 2 года назад

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@Jericho_bella 4 года назад

Now this is a truly good RU-vid how to video nicely done bud and thank you 🙏

@AroundTheHome1 4 года назад

Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@Chokani 7 месяцев назад

I learnt something within two minutes!!!!

@girohead 3 года назад

My 'chuck sucks'....impressive handy work, but you didn't really define what a chuck sucking meant. What is a symptom, weak grip?

@AroundTheHome1 3 года назад

Yes, that's pretty much it. It has problems staying locked. I have better chucks on cheaper drills. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@Tyani-sz6cg 2 года назад

How the f.... My DeWalt refuses to come out.

@christophergerads9881 5 лет назад

How do you remove the M6 chuck screw when it's broken? I've ran into that issue right now.

@AroundTheHome1 5 лет назад

Like the head broke off or it is stripped out?

@ru13z1 5 лет назад

Screw broke off and head came off loose. Any advice???? Great vid by the way

@thebigguy2757 3 года назад

I'm probably a bit late, but since it's a left hand threaded screw, you can probably get a right hand twist drill to grab it

@xxvodanhxx Год назад

So, this did remind me that the hammer action can break itself loose however. Most people are not as strong as this guy, and for some reason if your drill is still pushing full torque at the low setting, you can get hurt. I tried to hold the Allen wrench with my foot and it still slipped and hit my shin pretty hard, lucky it didn't crack my bone. I immediately remembered I had a metal pipe and steped on the drill with the pipe on the Allen wrench and it immediately came off. Nothing I did before that worked and I don't have a vise. Now trying to steal a chuck from a rigid drill for it but it just slips wont come off.

@AroundTheHome1 Год назад

Putting the Allen wrench in a pipe is a good idea to give you more leverage. Using a 1/2 or 3/8 galvanized pipe would probably do great. Many of these drills do have a lot of torque so it can get dangerous.

@oilsmokejones3452 2 года назад

Smart all the way..thanks..I'm going to try replacing a 19.2V Craftsman chuck with one from a Ridgid parts drill..hope the thread matches..the Sears is a strong drill but never really gripped bits very well..

@AroundTheHome1 2 года назад

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@lalrosangakhawlhring7894 2 года назад

thanks for video … 👍

@AroundTheHome1 2 года назад

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@beerless2950 4 месяца назад

If I would have found this video long before, oh boy! Thanks! Saved my life!

@AroundTheHome1 4 месяца назад

Glad to help.

@MrAcacio 3 года назад

Nice vídeo . I need a chuck for my DeWalt hammer drill DCD796. Bought 20 October 2020 and the chuck is already bad. This is why I use a full times. This is crazy brother. I can believe it. If you have any idea or recommendations about a good chuck, let me know. I will appreciate. Do you know if the link you post will work for me as well? Thanks!; May God bless you 😀

@AroundTheHome1 3 года назад

It should as long as it was a 1/2" chuck. This one uses the standard 1/2" - 20 threads. Every viewer that has mentioned that they switched to this one say they love it. And yes, it is crazy how so many of the top drill companies are using crappy chucks.

@timc1341 Год назад

Brilliant Just used this trick to remove stubborn chuck on ridgid drill that was not coming off with the normal allen key/hammer trick everyone else recommends. Just be careful about the allen key / vise grip combo whipping around. Just touch the trigger at first to give you a gauge of how strong the kickback is going to be then brace yourself accordingly!

@AroundTheHome1 Год назад

Excellent!

@historychannel2317 3 года назад

4:42 good thing the vice grip didnt come loose, that would have hurt!

@AroundTheHome1 3 года назад

That's right.

@garyr7027 2 года назад

Oh yeah, this is the way to do it, the chuck on my drill came right off. After trying the, hit the Allen key with a hammer trick multiple times, but not too hard, the chuck still refused to come off. Did it like this and she spun off with ease. Thank you sir for this advice... it does indeed work. Only thing I did different was I use a number 3 Phillips to remove the screw, it holds better than a flat... just sayin.

@AroundTheHome1 2 года назад

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@roontunes 5 лет назад

thanks, yep I got multiple faults with my m12, piece of junk and the chuck is only warranted for 90 days, no matter what you pay for by way of extended warranty, BEWARE, MILWAUKEE won't stand by their chucks after 90 days.

@AroundTheHome1 5 лет назад

Thanks for watching. Don't forget to stop by our website www.greatwhiteninja.com

@santisalvador3502 3 года назад

I have a problem with my Milwaukee chuck also, it doesn’t move at all, after I used its hammer setting mode, the jaws become frozen after sometime using the hammer

@AroundTheHome1 3 года назад

I have found that the stock chuck on these is just terrible. This drill is actually on it's second factory chuck. I had the first one replaced on warranty, on the last week of the warranty believe it or not, but the newer one started acting up after a year again.

@andrewrodriguez8492 Год назад

Just wacked myself in the nuts

@AroundTheHome1 Год назад

It can happen

@andrewrodriguez8492 Год назад

@@AroundTheHome1 I got it done. I didn't continue your method though. Clamped it, and used my jack handle as a cheater pipe. I swear the drill almost broke from the torque but I read on Reddit that it takes a lot to undo sometimes and they thought their drill was also going to break.

@stevenfromleicester2529 2 года назад

Would this be a standard procedure for most brand drills? I have a JCB drill and the chuck has a locking mechanism on it which is a nightmare to unlock so I want to switch it out for a no locking version

@AroundTheHome1 2 года назад

Yes, this will work on most drills. Can't say for them all, but this is a standard procedure to remove a chuck.

@chris746568462 4 года назад

I have a stuck chuck on my DCD460. NO WAY am I trying it that way. I value my bolwes being on the inside. Think i might try a 1/2 impact gun. Good idea though for the little drills.

@AroundTheHome1 4 года назад

Well you can do what I did but just lock the allen into a bench mounted vise instead. Anyways good luck. Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com

@Rightlydividing-wx1xb 3 года назад

I have never had problems with the chuck on any drill with a cord, every cordless one has stripped and I'm done with cordless ones.

@AroundTheHome1 3 года назад

You are right, many of these cordless drills have cheap chucks. Need to find one with a Jacobs or a Rohm. Strangely enough, I have found the Jacobs on the Master Force sold at Menards and on the Cobalt and Flex at Lowes.

@ralphups7782 3 года назад

I was thinking that, you could put the Allen key in a vice to save your wrists form whip lash.?

@AroundTheHome1 3 года назад

Yep, that could work too. I don't have a bench mounted vise, but no reason that wouldn't work well too. Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

@The52brandon 5 лет назад

My chuck was on super tight that I needed to use a ratchet and adapter. And the screw required a T40 torx key. And then to add insult to injury, the screw that came with the Rohm chuck I chose is like 70% the diameter of the Milwaukee. I haven't gotten it completely off yet, so I can't comment on whether the post is different too. But it'll REALLY piss me off if it is. At which point I'll tear the drill down far enough to take it off and try to fix all that with my lathe

@AroundTheHome1 5 лет назад

Is your Milwaukee drill a Fuel model? They use a different size chuck and different mounting screw.

@paulkremastiotis6296 8 месяцев назад

Thank you so much 🙏

@AroundTheHome1 8 месяцев назад

You're welcome 😊

@BobRooney290 4 года назад

didnt work. my drill doesnt have a break.

@bg147 4 года назад

Do these things have a bit of wobble in the chuck? I bought a Ryobi off eBay and it does wobble. The seller said I can return it or get a part refund. I made sure the screw is tight but didn't remove the chuck. Thanks.

@AroundTheHome1 4 года назад

It should't. Are you sure the chuck is wobbling and maybe not a bent drill bit? Just asking because a slightly bent bit can look like the whole thing is off. Thanks for watching and don't forget to stop by our website for many more helpful videos. www.greatwhiteninja.com