Corroseal Rust Converter Tests | Do’s and Don’ts of Converting, Priming & Painting Rusty Metal

Подписаться 208 тыс.

Просмотров 76 тыс.

50% 1

After several hours of frustrating RU-vid research on how to convert rusty metal (iron oxide) into a non-rusty metal (magnetite), I contacted the Corroseal folks directly and got the scoop on proper rust conversion techniques. Following our phone conversation, I ran new tests and achieved satisfactory results! Save yourself the headache; watch this 10-minute video and do it right the first time. 🕺
Corroseal on Amazon: amzn.to/3bdIj8K
Corroseal Degreaser: amzn.to/3bbRCWN
🎥 Keep Watching...
EcoFlow Delta vs. 9 Appliances: Watch this: • 9 Appliances Tested on...
Trax Trailer Mover: • Trax Trailer Dolly TX6...
Van Boom: • VAN BOOM: Why Are Vans...
My Van Bed: • DIY Sprinter Van Bed B...
How to Get Cheap DEF Fluid: • Sprinter Van Life Hack...
DIY Roof-top Deck: • SPRINTER VAN ROOFTOP D...
Sprinter Van Curtains: • SPRINTER VAN CURTAINS:...
Travel Lighting Kit: • My New Travel LED Ligh...
The Best Lights for a Drone: • LitraTorch 2.0 Drone E...
Road Shower Review: • ROAD SHOWER 4 REVIEW 2...
LitraStudio Review: • A Detailed Overview of...
Nanuk Case vs. MacBook Pro: • Nanuk 923 Waterproof C...
🚐 Sergei's home on the internet: www.SergeiBoute...
🌱 My wild edibles book: amzn.to/2W91Cwo
🎧🎸🎵 I get all my royalty-free music here: shutterstock.7...
🥬 Green Smoothie Challenge: • 30-Day Green Smoothie ...
📚 30-Day Green Smoothie Challenge eBook: sergeiboutenko...

Опубликовано:

21 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@FerretyWeasel 4 года назад

One correction here - they say on the bottle to apply 8 to 10 mil thickness. A mil is a unit "slang" for a thousandth of an inch. Thus, 8 to 10 mil is .008 - .010 inches. This is equivalent to about .2 millimetres. 8 to 10 millimetres would be almost half an inch thickness, which would be impossible to apply lol. I have the product too, basically just apply it as thick as possible and then apply more on top of that seems to be effective as you said. Just though you might be interested to know what a mil is - (an engineer)

@BoutenkoFilms 4 года назад

Thanks for the clarification. I fudged that up didn’t I?

@prubly68 4 года назад

I heard 8 to 10 mm in the video, and I'm thinking "no way!"

@near--zero 2 года назад

@@BoutenkoFilms that sounds like a sponsorship opportunity, people be applying 8-10mm of material per coat = $$$ in sales!!

@ittakesaworld 3 года назад

Came for the corroseal demo, stayed for the green smoothies. Dope barbell

@robertfreeman2322 3 года назад

We use this stuff all the time on our commercial fishing vessel. great stuff. we then apply a lot of epoxy paint over it. it's not made as a paint so if you don't paint your project that's been corrosealed afterwards it will start to rust again. it does not come off your skin/hands very easily. it's one of the toughest to get off your hands. use gloves.

@anteneupitra 3 месяца назад

true, i have use converters too

@pinoy413 4 года назад

Awesome vid. I'm planning on taking care of some surface rust on the frame of my truck. Thanks!

@jamess9138 2 года назад

Thanks for this video. I’m going to be using this on a bunch of projects. You did a great job.

@MatHelm 4 года назад

Ameture Pro Tip: When working with rims that have a tire mounted on them, break down and buy one of those cheap manual tire changers from Harbor Freight (usually $40 bucks, caught mine on sale for $30 online, so less than $40 shipped to my house in about a week) so you can break the tire bead, and have access to repair/paint as needed. 2nd tip: WD-40 is like magic on hard to break tire beads.

@ReshardsAutomotiveWorkshop 4 года назад

I use it all the time. I love it.

@panchovillaz8004 3 года назад

How work. I need using.

@bklynslipnjimmy 8 месяцев назад

Does it work on a small rust area on the car? Then , touch up? Thanks, friend

@songsfromthelord888 Год назад

Thanks for your help today, an DC Remember, that God loves you 🙂 ❤

@shazzorama 4 года назад

Thanks, Sergei. I have used this stuff, too. You gave very good instructions and troubleshooting advice. Very well done video, as usual.

@Colby.bankss 3 года назад

Super helpful, thank you!!

@amylou1238 2 года назад

I have used Corroseal for so many projects... everything from rusty door hinges, wheelbarrows, outdoor furniture, fencing, and of course automotive applications. It is the MOST AMAZING PRODUCT I have ever used. I spent $16 on a 32oz bottle about 10 years ago & I still have about 12oz left!!!! IMPORTANT TIP: DO NOT STORE anywhere that will get HOT, like a GARAGE or SHED. The material at the bottom of the bottle will rubberize & you will lose product.

@danielb5081 Год назад

I have looked at quite a few Corroseal reviews and see your very same review word for word on every one of them. Do you work for Corroseal?

@oficeptel6493 Год назад

Thank you. Very helpful.

@rondhole 3 года назад

Good video how FeII changed to FeIII and get more solid surface. The paint after this process is important step. I think Rust converter, Zn-aluminum coating, and top it off with paint and clear coat will make things perfect. Very important for cars underbody and body.

@romand123 2 года назад

Thanks for the video! I’m having trouble finding out what (if anything) you have to do if you want to paint after applying Corroseal. Is it basically ready to take pain once it’s dry?

@mont5584 3 года назад

Did you find in the coroseal instructions, after the application, anywhere, did you find any damage to the rubber tire??? Thanks! Good video@

@TheRoadhammer379 5 месяцев назад

It's water based, it literally washes off the rubber with soap and water!

@WilliamVG 2 года назад

Is it safe to use citric acid as a cleaner? I have mixed steel on my vehicle restoration project.Some parts are new, other part's have light pitting. Thinking maybe the citric will cause the new steel to rust and help the adhering process of Corroseal? What do you think?

@adalbertosolde 3 года назад

OK you said in the video "until rust comes back", how long before the rust returns?

@no_handle_required 2 года назад

is it really a "converter" or is it merely a topcoat that seals the cleaned metal and doesn't let it oxidize?

@TheRoadhammer379 2 года назад

You are not supposed to use it on clean steel, so there's that

@orcoastgreenman 2 года назад

Where it goes over rust, it converts the rust. Where it is on bare rust free steel, or paint, it dries to a clear coat.

@cpsims1972 Год назад

Thank you

@mc66683 3 года назад

For the record it is not 8-10 millimeters, it is 8-10 mils. This is roughly 0.2 - 0.25 mm. Colors after application Black: Conversion has occured, Gray: Apply more Corroseal while still tacky, Brown: Contamination has occurred remove Corroseal and start over. Other than that good video sir.

@aleksanderwojciechowski2124 2 года назад

Yeah, looks attractive, good jon and good point to be proud of. Cheers

@tgtg2945 4 года назад

Hi there. Great stuff I think the treatment did not work fully as there nay have been some oil - grease present. Try the wheel again please as that is my thinking I use jenolite and flag rust converter with great redults. Both finish in black. Good job. Thanks

@charlescoker7752 3 года назад

Couldn't you take the rust nearly rust free. Then let it flash rust for a day , or two then treat. That would give the Corroseal some rust to convert.

@TheRoadhammer379 5 месяцев назад

yes, the directions state you want a tight rust, like flash rust

@OG-Paul-Valentine 4 года назад

8 mm to 10 mm thickness? 9.00 that's scientifically and physically impossible.

@BoutenkoFilms 4 года назад

That what I was told by the pros. I don’t know what else to say? 🤓

@OG-Paul-Valentine 4 года назад

@@BoutenkoFilms just think about it. 8mm to 10mm thick. 10 mm is 3/8s of an inch. In order to build up a layer 3/8s of an inch thick using a water based product you would need to have several hundred gallons per square foot of metal. And a very long span of time applying said water based material. Like a decade.

@jamevay 4 года назад

He was Probably thinking 0.8 mm to 1.0 mm which is doable, but still needs lot more coats.

@Christian-eg2mb 4 года назад

@@BoutenkoFilms They told you mils, not millimeters. A mil is the general unit of measurement for coating thicknesses; 1 mil = 1 thousandth of an inch. For reference a credit card is about 30 mils thick. Anyway, good video showing real world usage of this stuff. I'm about to tackle my truck frame where surface rust is getting out of hand.

@MaddManufacturing 3 года назад

8 to 10 mil

@jonathanjones20 3 года назад

Will this work on stainless steel

@TheRoadhammer379 5 месяцев назад

no, stainless doesn't really rust and stainless is molecular

@patrickpeterman8736 3 года назад

can you spray this corroseal?? pjp

@davedave2525 4 года назад

I'm confused, why would you sand the tire ? I wasn't aware that rubber could or even would rust. The inner steel part is known as the rim, the outer rubber part is the tire, and together they make up a wheel!!! Hmmm????

@henrye718 4 года назад

I used this stuff problem was with its to thick and leaves brush marks which then have to be sanded and its not that easy to sand which kills the idea that's its some kind of barrier coat because now you have to sand through it. Its no where as easy to sand as filler primers that's for sure. It would be much better if it were water thin. So if its anything that needs a very good finish use something else.