COSPLAY TUTORIAL: Spirit Blossom Ahri's Nine Tails from League of Legends

Подписаться 47 тыс.

Просмотров 46 тыс.

50% 1

Tiffany Gordon Cosplay's cosplay tutorial for how she made her Tails for her Spirit Blossom Ahri cosplay from the game League of Legends. ‪@leagueoflegends‬ ‪@riotgames‬
Get the Harness Here www.tiffanygordoncosplay.com/...
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
0:10 Reference Image
0:16 Blueprint
0:36 Fabric
1:49 Dyeing Fabric
4:23 Polyester Fiberfil
4:42 Tail Bone Structure
6:18 Harness
7:27 Attaching Harness & Bone Structure
7:54 Harness Straps
8:16 Attaching Fabric Tails to Bone Structure
8:33 Finished Piece
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
✂ 2D Ahri Tail for Fabric Blueprint ✂
www.tiffanygordoncosplay.com/...
✂ 3D CAD/stl Nine Tail Harness ✂
www.tiffanygordoncosplay.com/...
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
💟 Spirit Blossom Ahri Fabric 💟
www.spoonflower.com/profiles/...
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
✴Materials Used in Video✴
Sharpies ▶ amzn.to/2UTTQEW
Wig Brush ▶ amzn.to/3kfWXkE
Synthetic Rit Dye ▶ amzn.to/2ZFp3y8
1/2in CPVC Pipes ▶ amzn.to/3dfhF0a
90-Degree Spigot x Slip Street Elbow Fitting Size 1/2 in
Heat Gun ▶ amzn.to/2N5yiRh
Sand Paper ▶ amzn.to/3eee0Rx
ABS 3D Filament ▶ amzn.to/2zHnndH
Nylon Strapping ▶ amzn.to/2TyHMI6
Dual Adjustable Buckles ▶ amzn.to/3ddMNxh
✴Sewing Tools✴
Sewing Machine ▶ amzn.to/3hHCipe
Universal Sewing Machine Needles ▶ amzn.to/3iuSlHb
Pin Cushion ▶ amzn.to/318jx6Y
Sewing Pins ▶ amzn.to/3k2mgHK
Thread ▶ amzn.to/2H06LBc
Fun Fur ▶ amzn.to/2HNqpAy
Polyester Fiberfil ▶ amzn.to/3mwBjdh
✴Cutting✴
Fabric Scissors ▶ amzn.to/2zGhKwe
Exacto Knife ▶ amzn.to/3ddtfsC
Cutting Mat ▶ amzn.to/2CHsT0R
✴Glues✴
Epoxy ▶ amzn.to/2AOZRvE
✴Safety✴
Heat Resistant Gloves ▶ amzn.to/34D9zxi
Dye Gloves ▶ amzn.to/2FnOgpZ
All Amazon and Blick links are affiliate links that helps support the channel at no additional cost to you if you buy a product. Thank you!
▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬ ▬
⭐Follow Me⭐
Instagram ▶ / tiffanygordoncosplay
Facebook ▶ / tiffanygordoncosplay
Threads ▶ www.threads.net/@tiffanygordo...
TikTok ▶ / tiffanygordoncosplay
Twitch ▶ / tiffanygordoncosplay
Twitter ▶ / tiffanycosplay
Gaming RU-vid ▶ / @tiffanygordongaming8330
💖Support💖
Ko-fi ▶ ko-fi.com/tiffanygordoncosplay
Patron ▶ / tiffanygordoncosplay
🎁My Cosplay Shops!🎁
Crafting Tools & Materials ▶ www.amazon.com/shop/tiffanygo...
Fabric Store ▶ www.spoonflower.com/profiles/...
Website/ Store/ 2D Patterns/ 3D CAD ▶ www.tiffanygordoncosplay.com/
♥Sponsors♥
Blick Art Materials [HD Foam] ▶ bit.ly/3PVV7sb
Cos-Tools [EVA Foam Tools] ▶ amzn.to/3Ov7udZ
Createx Colors [Airbrush Paint] ▶ createxcolors.com/
Excel [Hand Tools & Blades] ▶ excelblades.com/
Iwata [Airbrush Guns/ Compressors] ▶ www.iwata-airbrush.com/
L-email Wigs "code TIFFANY for 12% off" [Cosplay Wigs] ▶ www.wig-supplier.com/?rfsn=63...
Plasti Dip [Rubber Spray Paint] ▶ plastidip.com/
Spray Gunner [Airbrush Tools & Equipment Supplier] ▶ spraygunner.com/
SweetyCon "code TGC for 10% off" [Contact Lenses] ▶ www.uniqso.com/?ref=3292772.4...
Surebonder [Hot Glue/ Glue Gun] ▶ amzn.to/3OuBnuM
Uniqso "code TGC for 10% off" [Contact Lenses] ▶ www.uniqso.com/?ref=3292772.4...
#LeagueofLegends #sewing #SpiritBlossomAhri #cosplay

Хобби

Опубликовано:

29 янв 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 88

@TiffanyGordonCosplay 10 месяцев назад

Here are the most common question Q: Where can I get the Harness A: The only place to get my harness is on my Website here www.tiffanygordoncosplay.com/3d-cad-stl-files/ahris-nine-tail-harness-from-league-of-legends-3d-cad-stl-file (Please note that there are people trying to sell fakes of my 3D CAD file and they will not work! My Website is the only place to get this harness.) Q: What did you use/where to get this material A: List of all materials with links for them are in the video description Q: the pipe doesn't fit in the harness A: I used CPVC Pipe (not PVC). Make sure you are printing the harness flat on the bed, some printers may have saggy stair steps causing extra material in the hole and you might have to sand to clean up or open the hole more. Q: Fabric tails fall off the pipe A: Stuffing the tail will help them stay on the pipe. Having a smaller opening for the fabric at the end helps it stay. Your angle of the pipe may be facing down too much so bend it upward more. You can always hot glue it to the pipe to permanently attach it or you can tape/velcro it in place. Q: How heavy is it A: That depends on how much stuffing you use and how long of the pipes you use. These will have a bit of weight and is better to have them either straight by your sides or do a clam shell shape around you to offset it. Recommend having a wider nylon strap for better support. Q: How to travel A: Mine fit in a car. You can also add to the base of the pipes male/female CPVC pipe threads to detach each of the tails.

@jynx8875 3 года назад

From the shape and the height, these are the best fur ahri tails ive seen! Thank you for this tutorial, i will use it for my tails!

@TiffanyGordonCosplay 3 года назад

Thank you so much and Im glad you found the tutorial helpful! Make sure to tag me on IG when you finish your own build, I would love to see your final outcome 😁

@jynx8875 3 года назад

@@TiffanyGordonCosplay no problem, it's the best for the 9 tails I've found so far! And sure I will!!🥰

@5292121 3 года назад

1:20 "I recommend watching a movie" hahaha, I lost it there.

@TiffanyGordonCosplay 3 года назад

YeEe!

@nataliewicklund3421 Год назад

My friend and I are cosplaying Scorpia and Catra from She-ra and your tutorials have been a life-saver for me. Thank you so much for sharing your knowledge.

@TiffanyGordonCosplay Год назад

Aww thanks! I'm glad to hear that my videos are helping! Best of luck on your Scorpia and Catra builds, I may have a Shera build on my Cosplans list as well 😁

@Eyrien22 10 месяцев назад

Amazing work and great video *^*

@TiffanyGordonCosplay 10 месяцев назад

Thank you 😊

@zaneck_322 Год назад

Hey! I love it ! Do you know what to replace the printed part with?

@darleenpeschke9417 2 года назад

Hello? Could you tell me how much filling wadding u used for one tail? It would help me a lot to plan my cos. Thanks

@cheskasblogs3185 3 года назад

Wooooow

@RaschellXuan Год назад

do you wash the tail after applying the acrylic paint go get the fur nice ?

@lucysworld1483 3 года назад

This is really amazing! I do have a question though. Do you have an idea on how to poossibly make everything detachable for storage and travel?

@TiffanyGordonCosplay 3 года назад

Thank you! CPVC pipes have threaded male and female attachments that you could potentially attach to the harness to disassemble each tail.

@lucysworld1483 3 года назад

@@TiffanyGordonCosplay thank you so much for your reply! ^.^

@elreptiliano3678 Год назад

Amazing job

@TiffanyGordonCosplay 9 месяцев назад

thank you!

@yuppiiii8876 26 дней назад

How many metres of fur fabric do we need for all 9 tails? Like what’s its width and length?

@Fortuna123 2 года назад

Hi, Tiffany! Thank you for the tutorial. I'm thinking about using some of the techniques you used for the tail for one of my cosplays. I'm still a noob at prop making but if you don't mind, what size elbow joint did you use for this? And where did you buy your faux fur?

@tinytaiga 2 года назад

did you ever find what she used? im making these and these are the last parts i need but i cant find them :(

@TiffanyGordonCosplay 2 года назад

see my link for faux fur, and the elbow piece is a 1/2in 90-Degree Spigot x Slip Street Elbow Fitting that you can get from Home Depot/ Lowes

@tinytaiga 2 года назад

@@TiffanyGordonCosplay thank you so much! I went to home depot 3 times today because I was so confused on what elbows to get, come to find out I got pvc instead of cpvc LOL

@Glamadela Год назад

I want one so badly for this Halloween

@spiritshadow4996 Год назад

same there all so expinizve to buy tho lol so ima try to make one idk wht im doing

@roberth4395 3 года назад

This is much better than what I expected! I guess you can use the same method for a Doc Ock version. Great job!

@TiffanyGordonCosplay 3 года назад

Thank you! Also yes, you could definitely use this method for Doc Ock as well as lots of others cosplays 😁

@NekoBloom 3 года назад

How will you adapt the cosplay to wear the harness?

@TiffanyGordonCosplay 3 года назад

When I had the full cosplay on, the harness hid under the corset and you could not see it 😊

@luv.markys7711 2 года назад

Hiya! Great tutorial! If you don’t mind answering. What is the fur called? I’m looking on Joanna’s website and I can’t find any. :(

@TiffanyGordonCosplay 2 года назад

faux fur/ fun fur. I also have a link in the description for it

@nekonyacosplay 10 месяцев назад

Hey Tiffany! I’m from aus and I have been saving up and collecting everything I have needed to make these for a little over a year now! Finally they are complete and I have never been happier, thank you so much for the video, tutorials and patterns 🩷🩵

@TiffanyGordonCosplay 10 месяцев назад

So glad to hear it and I'm glad I was able to help 💕 Tag me on socials so I can see it completed 😁

@user-rp6ee1tw6u 3 года назад

Hello, where can I buy a 3D model of tails attachment?

@TiffanyGordonCosplay 3 года назад

Update! I now sale the 3d CAD/.stl file for the harness on my website =]

@emilijanir 2 года назад

I know this is an older wig, but i dont own a 3D printer is there any way to make it without it?? Because i am making base ahri skin and wanted to make the tails

@angelic.com_ Год назад

Hi! Where you able to solve this? I don't know what to do either! :(

@valenvera6268 Год назад

Hi Tiffany! I was wondering if the harness really does support all the weight of the tails and if i could do anything for them to have a little bit more support. I really hope you can answer me, LOVE your tutorials!

@alessandrogiuliani2915 11 месяцев назад

Thank you for the amazing video! Which is the diameter of the tube you are using?

@TiffanyGordonCosplay 9 месяцев назад

1/2in

@MemoriesOfRain Год назад

I don't know if you'll see this, but I printed the model I got from your site and for some reason, the 90-degree joints don't fit in the holes in the model? Should I just try to make the holes bigger myself? I'm honestly at a bit of a loss at this point. Any help would be extremely appreciated!

@TiffanyGordonCosplay Год назад

First off thanks for getting my harness model! Things to check, make sure you are not rescaling the CAD for Printing and I would recommend printing it flat on your printer bed because if you change the orientation it may cause dropping on the holes. Second, make sure you are using CPVC pipes (not PVC) as the 90 degree joints may be different. For the 90 degree joints the smaller part should be what is glued into the hole and the larger part is what the CPVC pipe will insert into. Also depending on your printer settings it may cause there to be when you print more droop between each print line or overhangs. If it is off by a tiny bit you can also go back in with a sanding drum for small clean up to open the hole. Hope this helps!

@nekonyacosplay 10 месяцев назад

I printed the model too and I ran across the same issue! I ended up purchasing some hobby wood and using a 21ml hole saw to drill and craft the part myself 😊

@gaotyb8851 2 года назад

this is so amazing !!! i just have a question, what is the weight of all this ?

@TiffanyGordonCosplay 2 года назад

thanks! there is a bit of weight but its not too bad. The only thing is that the harness straps go around your tummy so it can be a bit uncomfortable

@gaotyb8851 2 года назад

@@TiffanyGordonCosplay thanks !!

@hopla7559 2 года назад

Where does the fabric come from?

@TiffanyGordonCosplay 2 года назад

please see my links in the description =]

@arielandaya5378 3 года назад

sana all

@aprilsanimals6287 2 года назад

THANK THE LORDS OF COSTUME MAKING THATS THIS VIDEO EXISTS!!! I would never would have known how to make this without you. thank you!!! ALso, do you need 3 yards per tail or only 3 yards overall?

@TiffanyGordonCosplay 2 года назад

thank you! 3 yards total

@aprilsanimals6287 2 года назад

@@TiffanyGordonCosplay Got it, Thank you!

@mossyrivercosplays 3 года назад

Hi!!! How many yards of fur did you use?

@jynx8875 3 года назад

she said you will probably need 3 yards in the video

@TiffanyGordonCosplay 3 года назад

Yep around 3 yards! 😉

@nolent216 3 года назад

i wish the tail could be bended. you know, like to change the tail's positions so it wont look stiff. what material can be use to create a bendable tail?

@TiffanyGordonCosplay 3 года назад

You would need to 100% redesign the the harness and attachment parts to have them bendable but personally I did not want them to bend as this would change the full peacock look that I wanted for the tails and your center of weight would be really off and hurt your back.

@nolent216 3 года назад

@@TiffanyGordonCosplay oo. because i seen this tail products on online shopping sites and some of them says bendable so i thought instead of buying them in such high price why not making one as it would not cost me that much but all DIYs. I never did my own DIY cosplay before so i dont know much about making them but your video seems really helpful. Haha, the fact that you said hurt my back concerns me just that little bit. hehe.

@amandabuss1286 2 года назад

@@nolent216 I use threaded rods!

@nolent216 2 года назад

@@amandabuss1286 threaded rod? will definitely look into it. thanks Amanda

@aria5268 3 года назад

Did you end up stuffing any part of the tail?

@TiffanyGordonCosplay 3 года назад

There is a little bit of stuffing in them so they keep a more round shape 😁

@lauryn8424 Год назад

Can I use pvc pipes? We don’t have cpvc in the uk

@5292121 Год назад

Yes, you can, I believe cpvb makes it easier but you can adapt to what you have at hand.

@zuritodoroki4787 10 месяцев назад

hiiii i have a question, what diameters did you use for the pvc pipes?? (there is not cpvb ones in France either haha)

@meganvanderjagt6782 10 месяцев назад

What size pvc?

@TiffanyGordonCosplay 9 месяцев назад

1/2in cpvc

@lunastralee833 Месяц назад

Hi ! I come here to make my own spirit blossom ahri. But i'm french and if all the explications are clear, i can't found how many fabrics i need because yard are not used in my country :(

@5292121 Месяц назад

1 yard = 0.91 meters.

@lunastralee833 Месяц назад

@@5292121 How she makes with 3 yards 9 tails with 2 faces to cut out from the fabrics ? It's just impossible

@uglycosplays9192 3 года назад

How much dod this all cost?

@TiffanyGordonCosplay 3 года назад

The cost of materials for everything ended up being around $80 for me making it (including shipping costs for fabric materials) and without shipping probably would be more around $60.

@uglycosplays9192 3 года назад

@@TiffanyGordonCosplay thank you! I really would like to do this and this is a lot less then what I thought!!