Thank you so much for your invaluable video. My husband was trying for ages to put the belt back on, until I suggested he looked for help on RU-vid! Hay presto now it’s fixed 👏🏻👏🏻👏🏻🌟
I have a c38h and im in New Zealand. Need the pto to pgc belt replaced but missing the original. The setup looks identical to yours. Can you tell me the circumference inner or outer of the belt you are using?
im having trouble getting my electric clutch to work. when switched on light just flashes. i put direct power to clutch and its clicking in so thats ok and seat switch is linked out. also tried a bigger battery.. what else is there? board fuse ok but slightly burnt at connector on one port. the clutch cable that is. do you know of this problem??
I would check the feed from the switch / does the PTO clutch cable have 12v when powered otherwise check safety cutouts have activated ie stuck reverse cutout safety. Even try a cable bypass from fuse panel or switch ion case the original cable is fried.
@@John2992 yes I wired it direct with a 10amp spade connector through the switch. Worked ever since. The little board is silly money and if there is a fault or short on a damaged cable it burns out immediately. Rewire and fuse it.