Craftsman Tiller, re-assembled and fixed. Final part of the series. New parts and re-assembled.

Подписаться 3,4 тыс.

Просмотров 11 тыс.

50% 1

Final part of the series on how to fix a craftsman tiller. The 6.5hp Briggs and Stratton runs great. In this series you’ll see that I replaced the drive chain, the case gasket and new grease. The broken drive chain is a common issue with this as they will fill with water and rust out, causing the tiller to loose forward and reverse drive.
Contact me: pootsgarage@gmail.com

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@bradwhitney7330 19 дней назад

Got the same problem with mine. I don’t know if I want to try to fix it or not. I was hoping to find a detailed solution to fix it.

@josephpuchel6497 8 дней назад

Hey have you made the decision to rebuild or sell it. I just checked out one for repair. It needs an engine and I have a replacement sitting on my shelf. He says everything else worked but you know how that goes.

@garywilcox4025 Год назад

I had to beat the crap out of the shifter to get the rod out of the bushing. Of course all the gears and shaft had to be removed. This video skips putting them in the proper order for reassembly.

@PootsGarage Год назад

Sorry about that

@pearsonba350 3 года назад

Grease. Lots of grease. Then grease it again... Just like all the rest of the junk we play with...

@PootsGarage 2 года назад

Bought to start greasing more junk soon. You still greasing junk yourself?

@philliphall5198 Год назад

Drill and different wire wheels help and polish all the shafts good Silicone case together and you can drill hole to add hd gear oils like Lukas hub oil and 90W

@mikelamp5573 Год назад

It looks old. Was it hard to get Parts now that Sears is defunct?

@PootsGarage Год назад

Not too bad once you find the part numbers. I ordered my parts off Amazon.

@irishbulldog3389 2 года назад

Hey bud where did you get that gasket kit from? I have the same tiller I just bought for hardly nothing but shifter is froze up. So I need to do what you did to yours.

@PootsGarage 2 года назад

Seems to be common with these model tillers. You’d have to tear it apart to find out what’s going on in there

@1randyful 2 года назад

Wrong side case to put it together. Left side up when disassembly.

@PootsGarage Год назад

Probably, I struggled a bit putting it back together

@John-sq7uf Год назад

Odd question. If in good working order? do you think the F/R transmission in a tiller could be retro fitted into a go kart for a forward reverse gearbox?

@Jack-bd2qn 2 года назад

If you are going to make a video of repairing this transmission don't skip and jump important parts of the repair. It's no wonder you only have 4 comments. If you did a step by step repair it might actually help someone in a jam with the same problem.

@PootsGarage 2 года назад

I do what I can, sorry

@Jack-bd2qn 2 года назад

@@PootsGarage Do me a favor and go watch a few videos on Mustie1 chanel it will give you an idea or two. I'm trying to help you out not trying to slam you. I know it is a lot of work but some pointers might go a long way if you want to build your chanel... thanks just the same for the video. I think you can do much better you have the skills my friend!