Had my crawlspace encapsulated in NC. I arranged to have rockwool comforbatting placed into the extended walls rather than fiberglass. Rockwool comfortbatting is moisture permeable, bugs and rodents hate it, sheds water, fire resistant, higher r value per thickness than fiberglass, and has sound dampening properties. Other than a lower price, the benefits of fiberglass is a fairly short list. My crawlspace problems extended from fiberglass, so I made it a point not to reintroduce fiberglass back into my crawlspace. I can't say I benefit of sound proofing, thankfully the fire resistance hasn't been tested, but floors are warm and the wildlife issues I was having hasn`t returned.
Hey Michael, I've been watching your videos for almost 2 years now as well as those of others. You've made me realize things I'd never thought of before SO MANY times! I must say, without any hesitation, that you've got to be the #1 crawl space expert in the U.S. (shoot, maybe worldwide (seriously)!). Your information makes so much sense, is so thorough, and is easy to understand because you explain things so well - nobody else does all that anywhere near as effectively as you do. Your personality come through also, which adds credibility, and it's easy to see you are a smart person. I hope you're keeping local copies of all your videos "just in case" because they represent a valuable body of knowledge that can't be found anywhere else! As a point of reference, the formula I've used to sort out the "best" people to do business with includes these four guidelines: 1. They CARE about doing their job well and meeting the needs of happy customers. 2. They know their particular job well. 3. They are competent as individuals. 4. They have high ethical standards. You demonstrate each of these in great abundance - especially nice to see because it's so rare these days. My sincere thanks for helping me understand crawl spaces so well! Mine went from water, moisture, mold, and critters to dry, clean, sealed, and properly insulated thanks to you. Best wishes for your continued success (and more videos, please!)!
I'm building a house right now in CT. This information's value is immense! 500 square feet of pre-existing house (really a summer cottage turned into a year round dwelling) that had a whole host of problems. My wife and I replaced all the sills (with sistered 2x8s) to unitize the structure, lifted it an average 6 inches and put it down on poured columns. Right now we're adding the exterior crawlspace insulation ('skits') and intend to encapsulate the space using 10 mil (or better) using the techniques you've outlined. Still going to add joist insulation on the bottom of each bay (spray foamed in faced iso with fiberglass or rockwool. New England be *cold!* ). It's a lot of work but we're blessed to start with a near-clean slate in choosing the correct crawlspace components! My heart goes out to all those effected by poor conditions in their castles. I hope you continue making people's live better and healthier! Thank you.
Thank you so much for sharing your experience with us. Please let us know how it goes. Also, here is a website if you need to purchase some products to help in your project. diy.crawlspaceninja.com/mold-products/
Just to check :: if issues with crawl space fiberglass insulation, replace if it’s vented. If not vented, I can remove so fiber glass insulation? ( it’s pretty rough looking )
Fiberglass insulation typically holds moisture. That is where the issues come in. With vents means outside moisture can be brought in being trapped within the fiberglass. We suggest looking into closed cell foam board
Great video and information. I can see you want feedback to make the channel the best resource for crawlspace search results. I can say with confidence backed by my subjective experience as I explore the topic, you sir are the authority. I bet you have forgotten more stuff than other channels share. Now it’s just a matter of attracting the attention of viewers. My suggestion would be to grow or capture a colony of gnats so you can study their attention span. You have 4 seconds of undivided attention unless what you offer is necessary for sustaining life, such as light. Get right to the point. Viewers know in 2 second if they intended to be here or not. Don’t waste your precious time on training people about RU-vid. You have too much gold to share. It would be like having a key note speaker charging $10,000/hr spending the first 5 minutes explaining where the bathrooms and fire exits are located ;) Video. How many words are represented in a 30sec video? 30,000? Do lots of them. Capture raw emotions. Show the worst of the worst so they come see your channel.
I have a tall crawl space that has one wall completely underground outside. Does that wall need to insulated or just covered with my vapor barrier? Thanks so much for your videos!
Question: I am adding foam board to the crawl space wall. There is fiberglass batting between the joists at the sill plate. should I continue the foam board up to the flooring or stop at the sill plate? Thank you
I would stop at the sill plate and maybe lower if your area requires a termite gap then you could start again at the rim joists and foamboard/air seal there. Many pest control companies don't like the sill plate to be covered for termite warranties. Hope that helps, thanks for watching.
central indiana with pier and beam foundation on a vented crawl space. i have plastic and pea gravel on dirt, fiberglass insulation between floor joists and lots of moisture issues during humid times of the year. hvac vents have moisture dripping at times. what advice do you have for this situation?
I am looking at a house for sale in WV and the seller told me the house has your work in the crawl space, do you have a # i can call someone at to see what type of system was installed?
Advise please!? Houston Texas Peer and beam Non sealed crawl I placed r19 fiberglass paper up and was advised ill grow mold above it by somebody that had to do foundation work.. I pulled down a couple pieces and saw a few small specs growing with this being Over a year later and not near water source... Am I destined to rip out all that hard work and go to a open cell after all?
If it is trapping moisture, it can be a problem. Your type of construction is difficult to insulate properly and keep dry. You may want to consult a local contractor or weatherization specialist that understands moisture prevention.
live in the northern climate....have a wood foundation crawl space. the space is dry but there is a musty oder. minor mold growth as well. would like to insulate the walls. was going to use rock wool. should I put a vapor barrier on the outside/inside or neither? thanks.....
Rockwool is naturally moisture retardant so you shouldn't need a vapor barrier and I never recommend plastic to cover wood. Thanks for watching and I hope that helps.
thanks, Michael.....that was my thoughts as well even though the makers and installers of wood foundations recommended a vapor barrier on the studs inside the crawl space.......very confusing!!@@CrawlSpaceNinja
Anybody have any tips on insulating a crawl space that was a front porch but now its a living space. No insulation anywhere. The left wall is open with lattice covering the opening and cinder block wall to the basement on the right. The floor is not insulated and dirt base. Im not sure if i need to foam board the floors thats above and foam board the cinderblock? It has no mold but its a living space that needs insulation 😵💫😵💫
Hi, Who can I call to check out a musty smell coming from my crawl space. On a windy day I can smell it outside near the opening of crawl space and on the inside hall way coming out of my towel drawer.
I've seen a few instances of people insulation the floor/dirt either with foam board or spray foam and then vapor barrier on top of that with foam or spray on the walls. Is insulating the floor common? Recommended? Or should you encapsulate, insulate the walls, and then replace subfloor insulation?
any idea how much an inspection is in virginia , my moms small house, isnt 1 foot off the ground but my big arse, cant get under there to check things out for her
To secure the vapor barrier, is it better to tack it down with gravel on top along the perimeter or tape it to the concrete wall? I think tacking it down with gravel (or sand bags?) is better as the concrete wall breathes and the condensation gets trap and causes the tape adhesion to fail. Appreciate any thoughts.
Tapes and adhesives will usually fail over time. We use masonry nails, Christmas tree fasteners to fasten it permanently to walls. Thank you for watching.
What do you recommend for insulating skirting of manufactured home in zone 6/7? Typical home comes with fiberglass insulation with "belly wrap" vapor barrier under flooring with home installed on a concrete slab. Skirting is often uninsulated although we are seeing more installations with insulated skirting (foam board which look like stone or brick). Uninsulated vinyl skirting typically includes sections with ventilation. New installations with insulated skirting usually include multiple automatic vents. Seeing people insulating skirting of manufactured homes and not installing any ventilation and covering what ventilation may have been present. When this is done I rarely see any dehumidification installed. Seeing damage from excess moisture when skirting is insulated with no ventilation, or very little.
Wow, that's a cold area. I am not familiar with codes in that area but if Tennessee requires an R10 with 8-inch block minimum and a skirt offers zero protection versus a block wall. I am guessing, again guessing, I would want at least R20 if it were my home. Since usually foamboard is R10 max, I would double it up. That may prove to be a tough job but may be easier than installing a permanent foundation. Sorry I don't have a better answer...thanks for watching.
That's a great question if the foundation walls or insulated, normally you do not have to do that as long as there is a heat source in the crawl space. Hope that helps thanks for watching. I would also check with local code to see what they require for insulation in your area.
We suggest to check with local codes. However Foam Board with a R value of R-10 that is termite resistant is typically best. We also sell that here - diy.crawlspaceninja.com/rim-joist-insulation/
Question. So I have had my crawlspace inspected and was told I only had mold below the insulation line. That the subfloor is mold and moisture free. Would you still recommend removing the insulation for mold treatment.
Yes, when they told you there was no mold behind insulation, did they remove all insulation and test subfloor for mold? Sometimes, it's invisible to the eye.
They peeked behind the insulation and just visibly looked at it. My mold just looks like light pepper on the joist. Humidity levels is at 58% with a light duty (Lowes) home dehumidifier installed 4-5 years ago. Vents are not all sealed. Crawlspace has a light vapor barrier not covering everywhere. Planning on installing a Aprilaire 70 very soon by the Crawlspace company. However, I am planning on diyi-ng the rest. 1200 sq ft house Mold- Decon 30 Vapor barrier- your 12 mil ( one or 2-10x100?) enough -bora foam from local Crawlspace supply company Hilti- rental from you guys
I live in NC. I heard you say something about NC requiring a different attachment method of the barrier over the foam. Do you have any videos or instruction material for those specifics with pictures on how to do that?
It's not something we do but if there is no insulation I'd recommend you air seal major penetrations with foam and find a way to afix subfloor insulation. Sorry I couldn't be of more help.
Can you make a video for the average man who's deeply afraid of snakes but is going to have to encapsulate his crawlspace? Maybe there is a way to drive them out before you get in there? I'm thinking about sealing it up and gasses it with ozone for several hours
I wish I could offer you a solution, have you looked at some of these technology devices that are supposed to drive out critters? You could also get a critter wrangler to make sure it is clear for you. Sorry, I hope that helps.
