Crawler Canyon Quickview: FlySky FS-G7P radio 

I’m building a vanquish phoenix and really appreciate your honest review .

I just bought a "Flysky G7P RC Transmitter and Receiver R7P FS-R7P 2.4Ghz for Crawler' for $15.91 from Aliexpress. I hope it does what I want.

the Gt5 is still one of my favorites. the G7p is likely to get replaced but I don't know by what yet. I like the added control but the ergonomics kinda suck. The trigger having less throw isn't great.

Just ordered one from Aliexpress. The photo shows a version with a foam wheel, so I really hope I get that.

Thanks for your honesty. The other major crawler channels raved about this. The programability of this radio is God awful. I was looking at this radio, a Radiolink GR6 on Amazon, and a Turbo racing A82 7 channel from my local hobby store that has them on a killer deal right now. I think I will be going with the Turbo Racing as the value and ease of programability is there. As here in Canada, both the radiolink and flysky go for 110 to 120 and the Turbo Racing at my hobby shop is 79 bucks. Plus it looks a lot better. I was considering it as Vanguishs new rtr has the Turbo racing 4 channel, and it's a great performer. Thus, the 7 channel must be the same quality, if not better.

Most problems have been solved like the grip or the throttle curve through framwae update the only thing they didn't fix the joy stick thing

I bought the G7P from banggood when it was announced hoping it would work well for my 4WS build. I got used to the menus and don't really need to go back to them now that the rig is pretty well set up. I agree they weren't intuitive. The little thumb VR knob is awfully small to run rear steer but I'm getting the hang of it. I also use the channel status screen to know when my rear steering is centered (ie - I don't rely on the detent that would arguably hinder its use for steering). What's also cool is when I was trying different buttons for the steering, I didn't need to reset end points. I've always read we should reverse motor rotation for a brushless motor instead of reversing it on the remote. Have you ever tried reversing the motor rotation with your Hobbywing programming card instead of reversing the transmitter?

The curvy rubber wheels u have on your radios make em super rad an i love the affordable price. Awsome video thanx

Unless I'm wrong, the newest version of the Radiolink has a removable battery tray to install the bigger lipos, has all useful features of the new Flysky, AND can control multiple rigs without having to power the rig off when switching. I think it puts the receiver to sleep when you switch to another model. So, unless I'm wrong, you could get away with 1 or 2 RC6 Radiolinks and be good. I have 2 GT5s (control multiple but I'm starting to dislike not being able to drive multiple at once) that I really like, but I think I'm going to switch over to Radiolink for more features. I do have rigs with multiple light options, so I actually could use the 7th channel, but it's not worth the torture of the new Flysky.

i think ill just spend a dollar at hobby lobby and buy a sheet of foam to glue to the wheel. maybe even a few layers for comfort.

Is it better than the GT5? I’m still deciding between these.

I read that the G7P had 2 wheels on the box, the plastic one and one with foam. So probably there are 2 bundles, what you got and another with 2 wheels included.

After replacing the NB4 handwheel the control feel will be much better.

I agree with your assessment. The Radiolink is a much better value.

What budget radio do you recommend for a twin MOA RC4WD Bully. Needs to do channel mixing and a good ergonomic way of selecting both front and rear dig.

Where can you get the knob that's on the gt5?

I really wanted to like this radio, but after getting it and having a play I found the menu annoying. My radio also started to have the glitchy steering, any small tap to the radio would cause the wheels on the truck to shimmy and when I tried to do a firmware update the program glitched and now the radio is dead.

I just purchased the FS-G7P on eBay for $17. Did I still make a mistake?

Can 3D print a better wheel

You can complain the NB-4 is expensive but all 17 models fit, you can also have all 17 rigs on and it will only control the 1 selected model. So you only need 1 and with my math that is cheaper than a bunch of cheap radio's. But do whatever you prefer man. I'm really happy going from GT3 and RTR radio's to NB life. uh my tank 300 also came with noble lite, so I have 2 now.

I think they come with a foam wheel also. Look in the box it might be hiding?

Great review. Anybody ever tell you that you sound exactly like John Schneider?

I hot glue my radiolink battery cover every time because it bows enough to have the middle batteries come out enough to shut it off,but other than that it’s a pretty great radio for the price👍🏻like my gt5’s as well but this fly sky your showing seem a lil too much 😬

Print a TPU cover for the wheel that’s what i did.