No video :(

Creality Ender-5 S1 - 3D Printer - Unbox & Setup

Подписаться 236 тыс.

Просмотров 57 тыс.

50% 1

Amazon Links
Ender-5 S1: geni.us/UEvGwA
Recommended: geni.us/JustVlads
store.creality...
Creality Ender-5 S1 3D Printer 250 mm/s High-Speed Printing 300°C High-Temperature Highly Stable Cube Frame
Highly Stable Cube Frame
Cube frame with Cartesian structure, enhanced by thick linear shafts, gussets, cantilevers and silicone bed mounts.
250mm/s Printing Speed
Creality Ender-5 S1 customized a 42-48 high-torque motor and steel transmission shaft at Y-axis, supports a 2000mm/s2 acceleration, which makes you reach a 250mm/s high-speed printing.
Smooth Direct Extrusion at 300℃
"Sprite"direct extruder features bi-metal heatbreak and efficient heat dissipation, supports 1,000 hours of clog-free extrusion, wide compatible with multiple filaments, such as PLA, ABS, PVA, Wood, TPU, PETG, and PA.
CR Touch Auto-leveling
Equipped with CR Touch, the 16-point automatic leveling can complete quickly with compensation for points' printing height on the heat bed, level it easily and precisely
Improved 4.3-Inch Touch Screen UI
4.3"touch screen with a tabbed user interface, supporting 9 languages, A PID temperature control page is also added.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....

Опубликовано:

20 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 89

@JustVlads Год назад

New Channel: www.youtube.com/@Just_Print Ender-5 S1: geni.us/UEvGwA Recommended: geni.us/JustVlads

@religionisapoison2413 Год назад

Did you get the footing issue resolved? (Stuff fusing together)... Not really worth $500 if you're constantly fusing pieces together

@JustVlads Год назад

Yes, as someone suggested to flip the anti backlash spring around fixed the issue and prints perfect now.

@religionisapoison2413 Год назад

@@JustVlads thanks

@Tidumm Год назад

Hi just vlad! Following u for a long time since like 2020 n I like watched almost every video of yours since then. Please guide me I want to buy a 3D printer for myself this time so pls gimme some advice, I always get confused which printer should I buy resin printer or a filament printer. Pls help me you would do me a huge favour

@samk8076 Год назад

@@JustVlads What is the backlash? can you please explain where is this spring exactly please?

@everhardknol Год назад

Hello Vlad. My new ender 5 s1 had the same problem. However, it is not necessary to turn the nut. The problem is caused by the spring being mounted too tight. If you turn the top nut up 1 turn, the problem is solved. Turn the platter up by hand until the top nut comes loose, then turn the platter down 1 turn and then reattach the nut. If you put the nuts under the platform, the platform will lower automatically when the Z motor is switched off, the nuts plus spring in the original position prevent this.

@InterestedLlama Год назад

Same 'first few layers issue' here! Took me forever to identify the cause & fix it. Flipping the anti-backlash nut didn't do anything for me; there's another problem causing the same issue: Mine had unwanted fibrous residue from the packaging material stuck inside of the Z-Axis linear bearings. If you listen carefully, you'll likely hear a crunching noise coming from those bearings and when you roll around the very top of the Z-Axis you'll find a spot where there is way more friction than anywhere else along the rails. To get it out, I lubricated the Z-Axis linear rails, slid the bearings (and print bed) up and down a dozen or so times, rinsed with alcohol and repeated the steps another 3 times. After the final lubrication, and my initial layers are printing perfectly! Hope this works for you

@pandrews01 Год назад

I watched your video on the Ender 3 S1 assembly. I really enjoy your other assembly and review videos. Fantastic. No BS, no fluff, just straight to up "solid." Thank-you.

@stewgy Год назад

Just got my Ender 5 S1 and same thing with that early layer... everything has printed perfectly otherwise. loving this printer so far. Coming from a pretty old highly modified ender 3 and honestly its nice to move into the modern era.

@wyattdenbow7166 Год назад

Is it still working well

@religionisapoison2413 Год назад

If you got the footing resolved please update

@PowerInverter110 Год назад

I had the same problem. Flip the anti-backlash nut.

@tomahawkcnc5583 Год назад

I have the exact same problem with the wierdness on layers 2 to 10 , tried fan on/off from start , different quality, flipped antibacklash nut - nothing resolves it ?

@flunkium 9 месяцев назад

thanks bro. my first prints were perfect because of your video. The boxed documentation was not great. You saved me grief and time. :)

@JoshUC Год назад

Great videos as usual every time I see your videos I remember the first time I assembled my printer(Ender 3 pro) more than 3 years ago, watching your videos. Regards from Costa Rica!

@notchipotle Год назад

what I hate about creality is that they always overtighten some screws and the screw quality is really bad and soft compared to other brand, even smaller brand like kingroon, so just be careful

@YLJW4 Год назад

Best review I’ve seen on the tube thank you. ❤

@ianleach1562 Год назад

Superb video! I decided to build mine using your instructions here, and it worked beautifully! Thanks buddy

@bobbywhitney6262 Год назад

Great video and great instruction putting the unit together. Well I have received my Ender 5 S1 and printing the test prints and I didn't get this "phenomon" when printing. I only having issues at first slicing from Cura 5.1.2. So I did install the Creality Slicer and my prints are printing very well. But I am going to continue to play around with the Cura settings so that I can 3D print from Cura.

@biqquette 4 месяца назад

Im actually working in a factory on cnc machine, and the setting up, looks kinda familiar. Thx very much

@PowerInverter110 Год назад

I have the same printer and issues regarding the Z height problem. I flipped the anti-backlash nut, and that solved the issue. Mine shipped with the spring pointing up. Perhaps as the bed is going to start printing, the spring is under more tension as it is being pushed up. When initially printing that tension could be changing until it moves far enough down. I dont know... It is working for me... Also, I found my Z height was roughly 19.7 for the cubes, and now its dead on.

@JustVlads Год назад

Thanks for the tip! It fixed the problem.

@TinderSwindler_ Год назад

I am new to this and have the ender 5 s1, do you mind pointing me in the direction of where I might find this elusive anti-backlash nut? Thanks!

@PowerInverter110 Год назад

@@TinderSwindler_ Its the part that is connected to the threaded rod. The rod spins and moves the bed up and down. Attached to the bed is a spring and nut. I removed the threaded rod completely, and removed the 2 screws that hold the spring and nut to the bed. I then installed everything back together, except put the nut and spring on the bottom of the bed. Hope that help. Good Luck

@LWJCarroll Год назад

36:47. That manual bowden tube is going to make colour layer changes very easy! Ref Hue Forge filament painting….thanks. Laurie

@notchipotle Год назад

I have the same problem on one of my S1 pro, I have to realign everything to get it fixed

@bartdelege929 Год назад

For your problem on thé bottom, it's gotta be something with thé initial layer, temperature, cooling, flow and maybe initial speed, also try to decrease bed temp, because you had a little bit of elephants foot, great vid!!

@richfpv472 Год назад

Elephants foot has nothing to do with temperature

@bartdelege929 Год назад

@@richfpv472 if you Tink so, i fixed my problem's with decreasing bed temp and worked for me, ofc combining it with some other settings, try it if u want, otherwise fix it your way, i just try to help.

@jedeckert9525 Год назад

I seem to be the only one that has injection molded air ducts. Everyone else has printed.

@browniemedia 9 месяцев назад

Mine are also IM air ducts. Must be a production date thing

@jeffstercnc2271 Год назад

Always making great videos... love your editing skills always on point aswell

@lumi7610 2 месяца назад

29:51 ive been using the ender 5 s1 for over a year and i just learned bout that-

@OliverRivettCarnac Год назад

Thanks so much for the awesome video, I just got mine and have yet to set it up. I am hoping that I don't run into that same weird issue, although I see many comments with possible solutions. I am entirely new to 3D printing but really keen to finally get onto the bandwagon. Got loads of practical things I want to do and it should come in real handy.

@mxracingunlimitedltd7784 7 месяцев назад

How'd it work out for you with the Ender 5 S1? Im looking at getting one..

@saosing04 Год назад

Would this be a better choice over the Ender 3 s1 Plus or Pro?

@ebpman Год назад

I had the same problem with my review unit. The first level is bad. I have updated the firmware and see no change

@PowerInverter110 Год назад

I had the same problem. Flip the anti-backlash nut.

@AKZMOXY Год назад

thanks for the video just finish setting up my printer using ur video as reference everything went great.

@matiasvignati5598 Год назад

i dont know, but meaby you could try to print a cube with 55ºC on the bed for the first layer, and 50ºC for the rest. Really good review and really like the footage

@PrizzaMike Год назад

Thanks! This video helped me alot! 🔥

@dalilavelhieva7330 Год назад

Hello, Vlad! First of all, i want to say thanks for this huge work you do for your viewers! I really appreciate how much effort u put into it:) My question is which printer i should buy as a beginner (want to use it for work) - Creality Ender-5 S1 or Creality CR-10 Smart Pro? Both look very good.

@Lochlany Год назад

Ender-5 S1

@jonathangould1255 25 дней назад

Half price at the moment from Creality. Just ordered one.

@aladdin8372 9 месяцев назад

can you print metal piece with this printer?

@MrBuzzyben 5 месяцев назад

hi. just bought ender 5-s1. can you do a video on how to update the firmware please.

@radicalbyte Год назад

You should try the enclosure for this model.

@buckwaterhole7643 6 месяцев назад

having trouble with bed leveling. I start the process and the bed goes up and then it seems too much as it just vibrating at the print head any ideas?

@holgerst3607 Год назад

always nice videos

@SkK3191 Год назад

Is the CV laser module compatible with this printer?

@zk_6312 Год назад

Did you ever figure out what was causing the artifact during the first part of the print?

@robotogamer7220 Год назад

Sir please do a video on cr 10 smart pro .. BTW Love your videos ❤️❤️

@JustVlads Год назад

Coming soon!

@morbus5726 Год назад

have you gotten a bambu x1?

@velcrodreams178 Год назад

Great review!

@gasparigi Год назад

What is the point going down to get Z home? There is a CR Touch for Z homing, why not use that? With this homing method, it is slow and not easy to replace sheets with different thickness. Probably there is a reason, but I don't know what.

@mariyahaljneibi5822 9 месяцев назад

hi, thanks for the video, does this printer support 1.75mm filament as well?

@Deluxa801 Год назад

Hotend assembly is basically a bad cloned copy of EVA carriage platform which is already here some Friday. There is nothing unique about it. Another thing that amazes me is how Creality still can't solve and organize the xy cables. 2 cheap plastic cable chain solve this. It's absurd to have it in 2022 like this because you're asking for a later problems. Bed assembly is really bad nothing has changed. I honestly don't know who is the target group for that printer, expected something better compared to the old 5 series models....your video editing is getting better every day. Keep it up...

@azbesthu Год назад

is something rubbing mechanically on the top bed position? Or having issue on end of z screw?

@JustVlads Год назад

Good point, I will check. Thanks

@notarat Год назад

Vlad...I'm experiencing the same issue on my E5S1 with the odd banding near the bottom of the model as well as having to change the Z offset compensation like you did. Were you able to identify the cause?

@Hopatzful Год назад

Still use marlin? Not klipper out of the box?

@LowKey_YT Год назад

Have you managed to figure out the print issue you saw throughout the prints?

@JustVlads Год назад

Not yet..

@notchipotle Год назад

@@JustVlads I have the same problem on my S1 pro, I don't know the exact problem but I just disassemble everything and reassemble it again. this is why I prefer kit because I can make sure that everything is aligned properly

@themrmad Год назад

@@JustVlads that little rubber knob on the end of the z lead screw

@Tidumm Год назад

@JustVlads Год назад

I would recommend starting with a filament type 3d printer. Good ones are the Ender-3 v2: geni.us/HjS5eP4 or Neptune 3 pro: geni.us/vzwO

@mikesprague Год назад

What RC car are those wheels designed for, and where would I find those wheels? Thanks

@JustVlads Год назад

1/10 RC Drift Car Wheel: www.thingiverse.com/thing:3078091

@Dude_What_Are_You_Doing Год назад

Who made the intro song?

@leddifer707 Год назад

Have the same print issue, flipped the anti backlash nut with no improvement. Any tips?

@JustVlads Год назад

Try completely removing the spring to rule it out and also lube the screw. Other than that I'm not sure as that fixed it for me.

@cgwworldministries83 Год назад

Kind of annoyed they went with v-slot rollers instead of linear rails for a 2022 printer and STILL a cantilever bed. The motors are still 80 step instead of 160 step motors. Time and time again Creality shows that they only care about quantity over quality. What a piss poor job for a 2022 printer. A lot of ghosting can be easily solved with LDO motors.

@dronefootage2778 Год назад

you went way overboard with the details (i think). i turned it off after you explained the color of the packing foam and showed the stickers around 1:50