Тёмный

Create Your Own Test Leads! 

Advanced Level Diagnostics
Подписаться 11 тыс.
Просмотров 5 тыс.
50% 1

How to make your own test leads for a multimeter or scope.
Check out my Amazon Store!
www.amazon.com...
14 Gauge Silicone Wire:
amzn.to/4eh888G
Stackable Banana Leads:
amzn.to/4ggzv4K
Multimeter Banana Ends:
amzn.to/4dWhIhN
Disclaimer:
Due to factors beyond the control of Advanced Level Diagnostics, I cannot guarantee against improper use or unauthorized modifications of this information. Advanced Level Diagnostics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Advanced Level Diagnostics recommends safe practices when working on vehicles and/or with tools seen or implied in this video. Due to factors beyond the control of Advanced Level Diagnostics, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Advanced Level Diagnostics.

Опубликовано:

 

18 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 50   
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
14 Gauge Silicone Wire: amzn.to/4eh888G Stackable Banana Leads: amzn.to/4ggzv4K Multimeter Banana Ends: amzn.to/4dWhIhN
@eliseozuniga1777
@eliseozuniga1777 9 дней назад
I appreciate you taking the time to show us how to make some leads, I want to get all the electrical gadgets you use to trouble shoot I’m like a kid 🤣
@AnointedRei
@AnointedRei 9 дней назад
Really enjoy your videos brother! Could you do a video on how to use the small oscilloscope different applications etc. Just purchased it. Keep the videos coming man!
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
Great suggestion!
@bisenbart
@bisenbart 9 дней назад
I've watched you for several months and you are fantastic at diagnostics! Coming from a tech of 30 years, you have taught me a lot of diagnostic routines that are tried and true at getting to the problem.! Tank you for what you do and for showing us the tools that you use to get there!
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
Wow, thank you!
@cjmazdatech
@cjmazdatech 8 дней назад
So much fun making test leads and test lights, I've made a ton of them for various applications. Great video.
@AKChryslertech
@AKChryslertech 9 дней назад
Yup I use the stackable banana jacks. Making my own leads gives me the opportunity to test the circuits I work on without having to buy a bunch of leads I'll never use.
@shanestrains2849
@shanestrains2849 6 дней назад
I've made a few custom test lights for diagnosing bad a/c clutch coils, OEM connector off of core compressors and a light bulb. I shave the lock tabs off so its snatch and grab😆. Really enjoyed the video.
@juankrajo3874
@juankrajo3874 9 дней назад
Man thank you! This maybe simple for some people but it is really nice advice, i bought the Pico that you recommend me before and now im making my own improve cables and test lights and you post this, is really helpful!
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
Glad I could help!
@ThunderbirdRocket
@ThunderbirdRocket 8 дней назад
Sensational ! Very helpful !! Thanks . 👊🏼 🔥 🕊
@franciscodiez5825
@franciscodiez5825 6 дней назад
Great job! Thanks for sharing!
@zhraneeey
@zhraneeey 5 дней назад
Thank you for sharing the information. I have been following you from the Kingdom of Saudi Arabia for a long time. I have been following you and waiting for your videos. Can you create a video to teach us how to read and understand diagrams? Please, I am facing some difficulty in understanding them.
@GeneG-wk2mz
@GeneG-wk2mz 9 дней назад
Thank you can you go one on the test lights
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
It's really the exact same thing, just solder the end onto a test light.
@Mr2004MCSS
@Mr2004MCSS 9 дней назад
Great video. I have made my own test leads before using the same products you are using, and it was pretty easy.
@sheerwillsurvival2064
@sheerwillsurvival2064 9 дней назад
Very good I did a video about same thing months ago you’re video is much better 😉
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
I just checked it out, and your video was much more detailed! I need to try that Pamona wire you used, Thanks for sharing!
@sheerwillsurvival2064
@sheerwillsurvival2064 9 дней назад
@@advancedleveldiagnostics thanks buddy. I’ve learned a lot from your channel 👊🏻
@NoName-yr1jv
@NoName-yr1jv 9 дней назад
Well done 👍
@judodavid1
@judodavid1 9 дней назад
Thank you for the knowledge
@advancedleveldiagnostics
@advancedleveldiagnostics 7 дней назад
Thanks for watching!
@mlieser1230
@mlieser1230 9 дней назад
Thanks for taking the time to show how to make leads. I'm guessing you are using 60/40 tin lead solder.
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
I use Kester 63/37 Tin lead solder. I've had the best results with that.
@samrugtiv3839
@samrugtiv3839 9 дней назад
Yes this young man is a good tech .does anyone know what state he works out of.
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
Thanks! I'm in NJ
@hxc7273
@hxc7273 8 дней назад
I want to do this to the end of all my test lights too
@claudiosantana3320
@claudiosantana3320 9 дней назад
Nice
@naseembeg5396
@naseembeg5396 9 дней назад
Great Great video
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
Thanks!
@AbduMad
@AbduMad 9 дней назад
i wanna see you fix circuit boards, please start posting videos while doing so
@omaralvarez945
@omaralvarez945 8 дней назад
where do you get that test headlight bulb red housing you use in your video? Would be much appreciated thanks!
@advancedleveldiagnostics
@advancedleveldiagnostics 8 дней назад
www.jarheaddiag.com/shop/p/highamptestlight
@sivucit
@sivucit 9 дней назад
are they selling flux in syringe.. if you have link helpful please.
@Kkobilas
@Kkobilas 9 дней назад
Mine had little set screw from the back.
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
Haven't seen those, it's a good option if you don't want to solder. I personally prefer to solder it.
@calholli
@calholli 9 дней назад
T3mu has all this stuff already pr3made (including silicon3); ultra affordabl3.
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
There still the satisfaction of making it yourself😂
@calholli
@calholli 9 дней назад
@@advancedleveldiagnostics Yeah.. Yours are probably soldered better too.. for sure. I didn't realize they sold these kits-- so I'll have to pick some up and have them ready in case I need to repair a lead.. (good to know)
@kyletuttle9064
@kyletuttle9064 9 дней назад
Nice video brother
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
Thanks!
@calholli
@calholli 9 дней назад
My comments like to disappear here. lol. I know you probably have the c3nsorshi^t turned on for the bots.. But it restr^cts a lot more than you think.
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
I check my held for review daily and have not seen anything in it. Do you think they would delete the comment without even putting it in the review category?
@advancedleveldiagnostics
@advancedleveldiagnostics 9 дней назад
I just turned off comment moderation, Sorry!
@calholli
@calholli 9 дней назад
@@advancedleveldiagnostics Yes.. They delete comments all the time. I mean like, disappeared, completely gone. On the comments that you can see "in review"-- those are only shadow bann3d.. Meaning, they will appear to ME as if they are still there-- but no one else can see them. I log out all the time and check if my comments are still there.. If they are gone: and then I log back in, they will show up again (to me). Then I know it's just shadow bann3d. Youtub3 is horribl3 about this.. This is precisely why the bots are there-- so that it causes people to self filter turn on that moderation/ which then gives them the green light to c3nsor whatever they want. It's so insid^ous.. They are dece^ving all of us in different ways; including the content creators.
@calholli
@calholli 9 дней назад
@@advancedleveldiagnostics I can always tell when it's going to delete my comment, because where it says "4 replies" under the comment-- It won't even count my comment. lol. It won't even register that I put a 5th comment there.. So then I know it's going to delete it. and all I do is push refresh, and poof.. It's gone. lol. sucks.. SO I'm always copying my comments before I post them, so that I can repost it again, and then tw3ak som3 k3y wordz l^ke th^s, and it wiIl bypasz the c3nsorshi^p, usuaIly. Kinda sad that we have to do this-- but that's just how googI3 is.
@calholli
@calholli 9 дней назад
​@@advancedleveldiagnostics Yes.. They dele3 comm3nts all the time. I mean like, disapp3ared, completely gone. On the comm3nts that you can see "in review"-- those are only sha dow bann3d.. Meaning, they will appear to ME as if they are still there-- but no one else can see them. I log out all the time and check if my comments are still there.. If they are gone: and then I log back in, they will show up again (to me). Then I know it's just shadow bann3d. Youtub3 is horribl3 about this.. This is precisely why the bots are there-- so that it causes people to self filter turn on that moderation/ which then gives them the green light to c3nsor whatever they want. It's so insid^ous.. They are dece^ving all of us in different ways; including the content creators. I can always tell when it's going to delete my comment, because where it says "4 replies" under the comment-- It won't even count my comment. lol. It won't even register that I put a 5th comment there.. So then I know it's going to delete it. and all I do is push refresh, and poof.. It's gone. lol. sucks.. SO I'm always copying my comments before I post them, so that I can repost it again, and then tw3ak som3 k3y wordz l^ke th^s, and it wiIl bypasz the c3nsorshi^p, usuaIly. Kinda sad that we have to do this-- but that's just how googI3 is.
Далее
How 3 Phase Power works: why 3 phases?
14:41
Просмотров 1 млн
Are you turning wrenches the wrong way?
14:13
Просмотров 140 тыс.
연준 (YEONJUN) ‘GGUM’ Official MV
02:44
Просмотров 2,2 млн
How to Build a Homemade Bike Using a Barrel
00:21
Просмотров 1,2 млн
У НАС ДОМА ЗАВЕЛАСЬ КРЫСА 🐀
01:00
2023 Diagnostic Cart Video
11:12
Просмотров 11 тыс.
How To Identify An Unmarked or Blown IC Chip
32:31
Просмотров 61 тыс.
2019 Toyota Highlander  - TPMS Nightmare!
27:00
Просмотров 9 тыс.