Createx AutoBorne Sealer 

Glad you guys are posting more videos ! Learning alot from you guys !

Yet another great video. Ive been using Sealer black a lot recently as i paint on aluminium panels which are white, but I prefer painting on a dark surface. After a little playing with reduction they flow great through my e4 LPH80 and man is the finish tough. I use erasing and scratching techniques with Wicked over the top and do not need to intercoat over the black. It just holds up by itself. Killer product.

Hey Chris thanks for the tutorial man you’re saving myself right now I’m doing a job with Otterbourne sealer I’ve only done it before a few times but great tutorial man really helped out a lot

Thank you, very helpful!

I love the autoborne sealers. They fill and sand really well. Can you guys do a video of one of your w403 hi-light green over white with a clear clear coat to get a "ghost" pearl effect please!! Thanks for the inspiring videos.

Imo one of the best products to come from Createx. I sprayed my van bonnet with it last year, later that day we had thunder storms and our summer was over and I couldn't put a protection coat over the sealer so it sat like that threw the winter i also have seagulls nesting on my house so obviously my van got covered in seagulls scrap as I don't have a garage, anyhoo when I washed the crap off my van a year later the lacquer on the rest of the van had reacted to the bird poop where as the bonnet cleaned up like i'd just painted it that day, like I say a great product..

Always great information from Chris 🤟😎🍻 go to video's for learning or as recap! 💖

Thanks Chris

Tintas da createx sou fan. 🇧🇷👍

Can I base auto sealer over a panel, then spray bed liner material( t-Rex) over it?

Hey Chris, I've been painting Gundam models using my hp-cs and createx products. I've been trying to prime my pieces (after washing them and sanding them decently well with 600 grit) using the sealers, but they seem to be very fragile or not adhere well. I taped a piece after a day and it pulled the sealer off, and in other cases even handling the piece scrapped some sealer off. What do you think I'm doing wrong? I'm a huge fan of the Createx products, these videos you make are great, thanks Chris

Ive done a few smaller "test" projects with Autoborne sealer and love the coverage and look i get, but now im working on a slightly larger project spraying sealer silver through an LPH80 1.2 w/E4, and having a terrible time with the tip getting cloged - after a bit of spraying i can actually see the buildup on the outside of my nozzle - any tips?

Love your videos, very informative. I currently use Stynylrez because it’s a water based primer. It covers well and levels itself. Biggest complaint is it clumps up even in the bottle and causes all kinds of issues in the airbrush. Do the Autobourne sealers clump up easily? Watching your videos makes me wonder if it’s time to switch primers.

What would you recommend for doing a fiberglass helmet in teal? I want a vibrant teal, but I also plan on doing a teal flake with it. I've been going back and forth between a sealer teal sealer mix or doing the the silver sealer. Could I do the silver sealer without doing a candy? First time trying this, but I want to achieve my vision.

Hello and thanks for all the videos you create, I have a question, I'm thinking about painting some automotive plastics with AutoBorne Sealer, I plan to sand the parts first with 320 and then apply the sealer, my question is can I add some 4050 Gloss Clear to the sealer to make it more adhesive and then apply it to the plastic surface, and can I apply the 4050 Gloss Clear to the sanded 320 surface first and then apply the AutoBorne Sealer over that, Thanks James V.

I might experiment with a black base with that silver sealer misted over so it barely doesnt cover all the black and see how smooth it sets and if it dries in the air at that distance because I love that effect for candies. Even if its not an actual paint i just really love that particular silver

It looks like I may have found a replacement for cans of filler primer on my 3d printed helmets/armor just in time for my Master Chief costume that I'm printing. Now, if I could only find a source for spot putty that isn't red or cost 8x as much.

Possibly a dumb question but when you say they are compatible do you mean AutoBorne Sealer can be mixed with Wicked Airbrush Colors? Or just applied over it? Thanks

What psi would u use on a 1.4mm

Great video. Very complete information Question…..I have both Silver Sealer and 6001 White Sealer. I paint fishing lures (hard plastic). They are typically coated first with opaque white to make the subsequent colors more vivid. One of the problems we run into is the baits may get scratched when adding a mesh mask over the top. If White Sealer is this tough, is there any reason I should not be using it? Also I’ve added Candy2O to silver sealer to get very vivid metallics. Any reason to not do this? Your videos are excellent because there is no long lead in, no blaring music, and you are straight forward but cover details. Thx

Great vid and info, thank you for that! Question: If I were to use the Autoborne silver sealer as a basecoat and then painted with your fluorescent line - would that achieve a sparkle fluorescent effect? Thanks in advance!

Can the Autoborne Sealer go straight on to a scotch-brite surface on ATV plastics? Even with adhesion promoter applied, rattle can plastic paint just peels right off.

I am looking to paint aluminum and steel for outdoor use. Durability is important. Do I start with AutoBorne Sealer or 4050 balancing clear?

I have a masters airbrush model g79, which needle size would be better for airbrushing the silver sealer? .5mm or .8mm?

Hi and thanks. I left AutoBorne Sealer Silver with minor dirt nips. Is it possible to light sand thease before further artwork creation ect.

I want a white base on aluminum. Can I spray 6001 white sealer on aluminum or do I have to use 6013 silver first and then the 6001 white ?

Hey there, I've been struggling to use these sealers in my .5mm Iwata neo airbrush on diecast cars. My airbrush doesn't seem to put out as much paint as the .5mm you used in the video, looked a bit larger than mine. but at any rate If I reduce the paint a little to much its beads up on my substrate, if I go thicker the airbrush quickly starts to become clogged and spray erratically at best. I'm spraying around 35psi and using 2 drops of your 5607 retarder in about 8ml of paint. yes very small models so I don't need to mix more than that. Any advice or tips would be greatly appreciated thx!

Can I use the 6000 as a sealer before I exposy my painted lures for fishing.? After I airbrush them.

I have a iwata hp cs it has a .3mm nozzle what percentage should I use. Or it it even possible to use the .3mm nozzle?

I build plastic model kits I would like to use these paints but my question is what kind of primer do I need for these paints?

I’m about to spray a complete car with sealer black. I don’t have enough 4011 reducer. Can I substitute 4012 ?

love using these the only issue i have is i get a lot of tip dry very quickly. Ive been spraying at 25 to 30 psi with a .5mm airbrush but i do like using these so ive just gotten into the habit of cleaning my needle tip between parts. any advice to help with that problem?

Is Silicone Remover a solvent based cleaner? Could I use that for cleaning After the Sealer?

Could you touch on what psi you would spray at? Thank you!

Can you use these in an airbrush? I have an hp-cs

These are great products! But now I am really curious about that TH 2 cup fitting for the pps! Care to share? :)

So you guys have a display of a metallic gold, metallic silver, a metallic grey and pearl white base with your candy Coats over it. My Question is are you laying a sealer under those before you lay the metallic gold or the metallic Gray.. Because you have the metallic silver sealer, are you using a black or white sealer with the metallic gold or the metallic Gray over it and then the candy?

Can i put a diamond clear over this sealer for a basic paint job?

What size containers will these be available in?

Can I roll this with a paint roller ?

Anyone know what mix would create a vintage white color?

What is the number for the wax and greaser remover

If i were to sand the basecoat as mentioned, would the sanding marks not be seen when adding the paint job/final clear coat?

Cool

Hi Chris great videos. Would this help regarding painting helmets? I prep the helmet with 320 then followed by a high build rattle can primer. I then go over that with red scotch bright. However if I then use an airbrush paint on and cover with a transparent base I’m finding if I fine line tape on to it once I feel it off it’s taking the airbrush paint with it 🤬 any help would be appreciated