Creating Incisal Edge Effects on Monolithic Veneers and Crown 

It is a great product!!!

Make the glaze thinner on the incisal edge before adding colors. That should do it. If the glaze is too thick, then the colors will creep cervically.

Use the Ivoclar recommendations for crystallization (found on their website) and then the MiYO recommendations by Jensen, can be found on my website blog www.cadstar.org/blog/miyo-glaze-and-structure-firing-chart

Hi Bill, I have listed the recommended firing chart in the blog on my teaching website bit.ly/3aCt6jJ. With ceramics I place texture in the ceramic finishing and mainly add just incisal effects with MiYo. Structure is effective on zirconia to provide a ceramic appearance. I am still learning the structure. There are several Structure technique videos on the MiYO website. All the best.

Very stable, it is more like a brush on ceramic and it can be covered with structure brush on ceramic that is about 200-300 um thick that internalizes the appearance. Work well on both ceramics and zirconia.

Good question, Unfortunately, the Miyo is sensitive to firing conditions. A vacuum is needed which the Speedfire does not have. Programat CS2 by Ivoclar is a good all-around ceramic furnance.

So you can mill emax veneers with Cerec, and then characterised with Miyo, and then fire with Programat CS2?