When I work on this kind of project, if you are using a cylinder pcp, fill the cylinder with airsoft bb's and save 90% of the air you would usually waste, another great video fellah, you certainly know your stuff
Thank you for these awesome video, excellent explanations. Do you sell the tester? Or you can send me blueprints to make one? I can use a lathe and I would like to have one handy.
I have a question if you do not mind ... How can i adjusting the power for my cricket .... through the air regulator adjusting or the Hammer Spring...Which is better, do you think...thank you my friend
can you splays a regulator to operate on a new designed air rifle. porter tip break barrel, which is operated By a hammer simpler to that of a hammer that is used on a firing pin . ? > the air chamber will screw in to the read of the springer, But the regulated air will travel down a fine drack pipe. to the exist point on the . barrel. ? still in the design stag any idea's ?
Great video easy to understand is that a external or internal regulator also have you heard of a company called Huma that sells regulators I have an unregulated air gun aea 25 Cal I want to add a bigger tank I found one I'll be changing out the $450cc tank to 700 carbon fiber tank also I want to put a regulator on it external and I found one from Huma it's out of the country but I want to know if you know too much about them if they are good regulators and if it is a legit company great video thank you for that video
Hi Mr Rowe where can you get these reg Testers from which your using has the one your using can accommodate all different regs. Are they self made by yourself or can you purchase the same type has yours has I live in the UK and they don't have that type let me know thanks
great video Ernest! I made one testing cylinder like the one you have here, my problem with it is when i bleed the air supply, the air in the tester will bleed too. are you using one way valve fitted at the bottom of the tester? Thank you
Ernest Rowe do you have links for the fittings you are using in this tester? one way valve? I dont like the idea of leaving the tank hose connected all night long. Thank you.
the threaded insert in my crickets shroud , that the barrel threads into is loose and spins...any way to take this shroud apart and re glue the threaded insert?
Hello Ernest. How can i syncronize the hammer spring, the valve spring and the regulator? in order to obtain a speed of 890 fps i have to set the regulator on a pressure of about 130 bar, but how i have to set hammer spring and valve spring? thank you veru much and sorry for my english.
