CRUISE CONTROL RETROFIT - AUDI A3 8P *MK5/6 GOLF/PASSAT/EOS* 

Nice one dude! I actually did this on my S3 a few weeks back, and fitted a flat bottom multi function wheel at the same time. Its probably worth pointing out that you need to make sure you have the correct revision steering control module to support both cruise control & the MFSW. I had to purchase and install one with part code 8P0953549F at the same time I did my retrofit. Also, only 06 onwards cars have the cruise control cable fitted as standard (even if the stalk isn't fitted), so pre 06 cars you need to purchase and run the wire too :)

Thanks! I didn’t realize it was so simple. I was disappointed my new car didn’t have it but will fit it now

ur videos made me to love my 8p even more

Thank you so much Mati: I needed to change the wipers control and thanks to you video it all went smoothly 😉🤗

Another brilliant video Mati, going to do this on my A3, keep the videos coming.

Well despite the weather and the dogging-spec steamy windows that turned out ok in the end. I take it the GoPro yielded no useful footage (or did you forget to check it 😂). Pretty sure that's the code for auto locking though. Thought Cruise-Control was: ⏹⏹▶️⏺⏺🔼◀️🔽🔽

Nice vid. About to o this to mine. Just need to get a lower cowling. Got the stalk and tools. Was nice to watch someone do it all the way through. Have read through a few descriptions and it sounded within my capabilities but seeing it being done was really useful. Hoping to get mine done next week.

At 12m03 one clip at the front, that was tough. I needed a long 2mm Allen.

Thanks mate! Just installed mine and coded with Obd11 Straight forward!

I have a similar Audi the back lights are different also on a 59 plate ghost lights I only have the red light on the side nothing under the door other than a plastic cover can I get puddle lights for my A3 sports line no body will give a straight answer yes or no or light convertions

How hard do you think it would be to retrofit a parking sensor? My car is missing one.

Will the indicators etc still work before being coded?

What's best place to buy the cowling and levers? I have a 2009 2.0tdi manual and hoping to install this

How do I know if my audi a3 2005 1.6 fsi can be fitted with cruise control without installing any cables or a ECU?

Just install my cruise control now my car won’t start any idea? Cheers

Mate I’m loving the vids.. got an 8p Now I’m struggling to find a flat bottom steering with DSG paddles Any suggestions?

I thought it was impossible to install and can only be done during manufacturing?

Can I use the same procedure for a manual Audi A3 2009 1.4 TFSI???

I’m wanting to fit a cruise control to my 2001 mk3.5 golf cabriolet 2.0 litre. I got the cruise control bits off a breaker car but it was manual and mine is automatic. Looks like it’s going to be a difficult job. Any tips to give me? 😁

Hi, did you have any traction control issues or absa coding issues after?

Hi Mati can you tell me the part number of the lower cowl that you purchased

Hi there Mati I have been considering undertaking this on my 8P1 ( 2009 ) 3 door hatchback but I have been put off by the connection to the accelerator and brake connection. While watching the video I see that you did not touch either of these so am I correct in thinking that this can be achieved with the use of my MAXIECU OBD 🤔 🤔 🤔 🤔 One last thing can you please tell me the Audi Part Number of your "engine cover" because all the ones I am seeing have the oil filler hole on the right hand side 😊😊😊😊

I’m trying to find the cowelling stalk box but I can’t seem to find it?

Is retro fitting the cruise control the same as getting it from from factory? Or is it not the same?

Can this be done with a manual 8p as easy?

Hi Mati I have just watched your video on "Cruise Control" and I have some questions ; 1) My steering wheel does NOT have the extra buttons as seen on your steering wheel, am I OK to go ahead and fit ? 2) I do not have a computer game BUT I have a MAXIECU reader, can I do the coding from there ? 3) How do I know that the steering wheel is correctly lined up, are there any Audi marks for reference ? Tony

Hi, I have Audi A3 2009 plate I really want to fit cruise control in my Audi. Can you please explain where can I get this kit and where I can get it coded from. I would really appreciate that.

Heyy what other parts are needed besides the limiter switch or what is the limiter connected to function

Mate what is the tool called you used for take off the steering Size 12 multi ___ ?

where can I find this?

Great video mate. How did you get it coded?

Where do you get the code from 😊

Do you know if its possible to drive the car again before coding? I've read somewhere you need to clear some fault code or something... I'm gonna do the retrofit but I'm relying on a friend for coding so hoping I can do it at home and then drive round his.

Have you had the glove box common vibration yet? Mine has just started and it’s flipping annoying

Wait? What year is you A3? Cruise Control in my 2007 1.9TDI A3 from factory.

Where do you take it for getting coded and how much is it. I’m looking to do this but new to all this 😁👍🏼

Wow I need this! Where did you get the parts from? I'm going to see if a garage will do this for me as I'm allergic to manual labour.

Hi Mate, Is this will work for 2010 Audi A3 1.4 TFSI? Can I buy it online?

Matt how does this control the throttle?

Is that PS2? GT

Can I use the same procedure for a manual Audi A3 2009 1.4 TFSI???