Crystal Woven Earrings - Cheryl St. Pierre of Majestic Wire Artworks

Подписаться 19 тыс.

Просмотров 12 тыс.

50% 1

This used to be an exclusive tutorial, now being released for public view.
Supply list below.
These earrings will be Available for purchase here - if they are not up, just ask me. / cherylstpierreofmajest...
Want to share a photo of your Work? You now can at my Facebook page meant for sharing. / cheryl-st-pierre-of-ma...
Check out my patreon Channel for exclusive tutorials and my technique tutorials.
/ majesticwireartworks
Note: I give you permission to use my designs to make and sell in craft shows and the like, however not to sell online.
MEASUREMENTS - Start weave 3.5 inches (9 cm) from the left
First Weave measures 1/2 inch (12.5mm)
Coil measure 5/8 inch (16mm)
last weave should be about 1.25 inches (31mm)
Supply list.
4 - 7 inch(17.5 cm) pieces of 20 gauge (0.81mm) dead soft wire (2 for each earring)
2 - 3 foot (90 cm) pieces of 28 gauge (0.31 mm) dead soft wire ( 1 for each earring)
6 - 4x3 rondelle crystals
2 - 6x4 rondelle crystals
2 ear wires of choice
Chain Nose Pliers - www.beebeecraft.com/p-pandaha...
Round nose pliers - www.beebeecraft.com/p-benecre...
Flush cutter/snips - www.beebeecraft.com/p-nbeads-...
ruler
Thank you Beebeecraft www.beebeecraft.com/ for these magnificent pliers
Oh and remember to use CHERYL5 to get a $5 off coupon when making an order of $40 USD..

Хобби

Опубликовано:

3 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@user-mu2gh3mt2l 4 года назад

Здравствуйте, прекрасные серьги,очень изящные, сделанные с душой и прекрасным вкусом. Большое спасибо 🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷🌷 Елена

@cherylst.pierre3148 4 года назад

Awe, that is so sweet of you to say.. Thank you so much. 🌷🌷🌷

@dianeibarra6839 4 года назад

Wow... gorgeous...

@cherylst.pierre3148 4 года назад

Thank you... they are a bit of a challenge, but so worth it.

@scottthornton4214 4 года назад

These are beautiful!

@cherylst.pierre3148 4 года назад

Thank you

@anitaibarra5763 4 года назад

Another beautiful design. Thank you for sharing your works of art with us.

@cherylst.pierre3148 4 года назад

My pleasure 😊

@niniveldouglas2718 4 года назад

Very beautiful!

@cherylst.pierre3148 4 года назад

Thank you

@carolecaro4466 4 года назад

Very pretty. Thank you so much for sharing your knowledge with us 🤗

@cherylst.pierre3148 4 года назад

Thank you and you are most welcome.

@patticakes838 3 года назад

Love these earrings

@cherylst.pierre3148 3 года назад

Thank you so much 💕

@pamelaihm7924 4 года назад

So happy that I’ve found your tutorials! Love all of your designs and the great tips you share!

@cherylst.pierre3148 4 года назад

Thank you so much!

@sharonmartinez7851 4 года назад

Thank for another beautiful video. Also, thank you for sharing your story. You are amazing.

@cherylst.pierre3148 4 года назад

You are welcome.

@kimbain4368 4 года назад

Lovely design! I so enjoy your work! I'm also glad to see that you've found a more neutral nail design that didn't adversely affect your health. Tfs!

@cherylst.pierre3148 4 года назад

Actually at this point, I was growing out my acrylic nails and had painted them with nail polish.. I am still experimenting with my nails.. I was trying the dipping acrylic method.. not easy to do.. so now I am experimenting with UV light gel polish.. My nails still break with this.. I have ordered some reinforcing UV gel to strengthen them further.. My nails are a constant battle.. I know my nails look terrible in this video.. but it is a process I need to go through...I have had some very rude comments.. I am just happy that some of you understand the battle I go through with my nails. Thank you.

@IndigoDesignsbyErica 4 года назад

Stunning! I would buy a pair of these versus a pair of gold earrings. I love how well you explain step by step. It makes it easy to follow along. 💚

@cherylst.pierre3148 4 года назад

Thank you so much and you are very welcome. I think these would look good in any wire.. However I would not use coated wire because they do not slide well.. I should take the time to write that in the description.

@IndigoDesignsbyErica 4 года назад

@@cherylst.pierre3148 You're welcome! happy beading! 🖤

@exequielcardenas7911 4 года назад

lindo trabajo

@cherylst.pierre3148 4 года назад

Thank you

@galina1970a 4 года назад

Как красиво сделано, спасибо.

@cherylst.pierre3148 4 года назад

Thank you so much.

@maritapia7558 4 года назад

Que hermosos =)

@cherylst.pierre3148 4 года назад

Thank you

@blancaluzfierro8343 4 года назад

Hola me encanto este diseño, me podría decir que calibre de alambre utiliza y cuanto es de cada uno para cada arete?

@cherylst.pierre3148 4 года назад

Tengo todas las medidas en la descripción. Estoy intentando un experimento. Estoy poniendo las medidas en Google Translate. Agregaré cuánto por cada pendiente, ya que solo declaro 4 piezas, 2 por cada pendiente. Mientras hacía esto, noté que había extrañado poner el alambre para tejer, así que gracias por eso. MEDIDAS: comience a tejer a 3,5 pulgadas (9 cm) desde la izquierda First Weave mide 1/2 pulgada (12.5 mm) Medida de bobina de 5/8 de pulgada (16 mm) el último tejido debe ser de aproximadamente 1.25 pulgadas (31 mm) Lista de suministros 4 - 7 pulgadas (17.5 cm) piezas de alambre blando muerto calibre 20 (0.81 mm) (2 por cada pendiente) 2 piezas de 90 cm (3 pies) de cable blando muerto de calibre 28 (0,31 mm) (1 por cada pendiente) 6 - 4x3 cristales rondelle 2 - cristales rondelle 6x4 2 cables de oreja de elección

@scottthornton4214 4 года назад

Did you ever do a video telling us how you got into jewelry making? And how long have you been making jewelry? I would love to hear your story.

@cherylst.pierre3148 4 года назад

I started jewelry when I got my divorce... in 2009.. therapy and rebelion... I hesitate to tell my story because the reasons i did it the way I did, some people would disapprove I guess... I went head strong in.. spent a lot of money in a matter of months as I didnt have anyone to tell me no.. I found a fellow named Ricky Jorgensen, Liberty Wire Artworks. I Bought his entire kit (all you could ever need in tools) and all of his DVD's plus a lot of product.. I think in 6 months I spent over $4000 I started with hard stuff... And did amazingly well.. I learned with gold and silver wire.. Then after a few years I stepped backwards and started doing simpler stuff.. creating my own designs with copper.. I fell in love with copper, it feels like magic in my fingers. .. That is a very short version of it.. I also am camera shy, so would not enjoy taping myself talking with you.. I probably would pass out.. lol.

@scottthornton4214 4 года назад

@@cherylst.pierre3148 I can understand the camera shy thing. Thank you for giving me the short story. I am sure the long version is interesting. I haven't heard of the man you learned from. Did you buy the DVDs from a specific jewelry making store? You are a natural. I love your work. Thank you so much for sharing.

@cherylst.pierre3148 4 года назад

He used to have his shop online. I live in Canada, he was from the states and had a Southern accent. He used to be a pilot and his plane crashed, as a result was in a wheel chair. He totally disappeared from the internet some years back. I do not know what happened to him. This is why when people ask me where I got my original tools I cannot refer them to him.

@scottthornton4214 4 года назад

@@cherylst.pierre3148 That is sad he disappeared. I am not sure what part of your story, people would disapprove of. I did not see anything wrong with it. I think I am just fascinated with people's stories. It's a way of getting to know people. And most of the time it builds a respect for one another. Which I feel is lacking today.

@cherylst.pierre3148 4 года назад

My rebellion and spending so much in such a short time. I dont want people to think that it is needed.. You can start up with spending very little. ( I had a very controlling ex, who supervised and limited every penny I spent TO AN EXTREME )...