Your video helped a lot! Watched a video where the guy loosened his engine bolts so he could get the belt on the front pulley, sure glad I watched yours and found out I could just slide the pulley down a little. 👍🏼
This was a pain to do but i did it. Tipped it like you did but onto a car seat which helped. Deck came off like a champ but was a pain to get back on. PTO clutch nut was a bit but a hammer on a socket wrench took care of it. Engine pulley luckily slid right down belt went on easy but the idler spring fought me but i got it. Then the deck was a pain to get back on but i eventually got it. Had to attach the back j hooks first then use the triangle piece of metal on the front to tighten it up then i needed a ratchet strap to get the belt back on the idler wheel on the deck but i got it and i now have a working mower. I cleaned out the deck all the grass and fluid filmed the deck and greased the blade bearings and everything works.