Cura 3d Printer Slicer Secrets Exposed

Подписаться 83 тыс.

Просмотров 85 тыс.

50% 1

The Cura 3d Printer Slicer with hundreds of combinations of options is hard to master. This video highlights six capabilities built into Cura that many of my viewers have asked about over the years.
00:00 Topics
01:46 Gcode, Cura and 3d Printers
05:17 Adding an Unlisted Printer to Cura
14:23 Different Settings for Different Parts of a Model
20:19 Cura Marketplace
22:50 Installing Post Processing Scripts
25:58 Reducing Print Blobs
29:00 Printing Images on a 3d Printer
---
The MakeWithTech channel teaches people how to use desktop technology to create, innovate and make things. If you are a "maker" and want to learn more about 3d Printing, 3d Printers, 3d Printing Slicers, Computer-Aided Design (CAD), or 3d Modeling, this is a place you should visit often. The channel includes additional content about using a wood lathe, woodworking, programming single-board computers such as the Raspberry Pi, Adafruit Circuit Playground, ESP32, and Python. Available reviews are about Prusa, Creality, Monoprice, ANET, Flsun, Fokoos, JG Maker, and Flashforge 3d Printers. Slicers covered include MatterControl, Cura, PrusaSlicer, Flashprint, and IdeaMaker. CAD design videos cover TinkerCAD, FreeCAD, OpenSCAD, and Shapr3D. Slicers covered include MatterControl, Cura, PrusaSlicer, Flashprint, and IdeaMaker.
---
Let's continue to learn together. Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and website.
I have reviewed the following printers or similar printers:
➡︎ kit.co/makewithtech/3d-printe...
These are some of the tools I use for 3d printing day-to-day:
➡︎ kit.co/makewithtech/basic-3d-...
I have reviewed or used the following 3d printer upgrades:
➡︎ kit.co/makewithtech/3d-printe...
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ kit.co/makewithtech/3d-printi...
I will be covering basic electronics and software in future MakeWithTech segments, and here are the products I am using:
➡︎ kit.co/makewithtech/software-...
Some of the Woodworking products I use:
➡︎ kit.co/makewithtech/drvax-woo...
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Additionally, cogitations, LLC uses only authorized or open source clip art and third-party images. Images and videos used in product reviews and tutorials are from the original product (software or hardware) manufacturer's site.
** We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.

Хобби

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 151

@calvissuperman Год назад

these tips are game changers. Love that it's not a video about "best settings" or simple "just do this" tricks, it's a direct learning guide on how slicing works and how to learn more and gain understanding

@jaundersousa3530 Год назад

Your passion for 3D printing really shines through in your videos. Thanks so much for your easy-to-follow contributions to the community

@MakeWithTech Год назад

Thank you for watching

@KAZVorpal Год назад

Yeah, but he still makes some huge mistakes. Like his explanation for the lithophane, where he says that the Z axis is less detailed, when in fact that's where the greatest detail is. The usual print orientation advice is to try to get details along the Z axis, NOT the X/Y axis.

@user-bt9ek2dv2y 2 года назад

Great video! I really like your videos and how you teach techniques. When I get asked about how to do something I always point them to your channel. I always learn something new and make my prints better. Keep up the good job!

@nunyabizness6734 2 года назад

Will definitely be using the settings guide. Just started making the move from prusaslicer to cura and was a little overwhelmed with all the options and the fact that many of them seem to be very similar with no clear distinction between them. Thanks!

@dac7046 2 года назад

Thanks for filling in some gaps. That slicer setting add in is worth the price of admission!

@abefroman5191 Год назад

You covered all of this so well. Thank you. I love the recap at the end. You have to be a teacher.

@GaryParkin 2 года назад

Thank you Irv, for your video. The marketplace is awesome! I never knew (or looked) at what it was. I'll spend the rest of the afternoon reading the in-depth settings on what my S10 can do.

@cashmoneyhustler 2 года назад

You are by far the best 3d printing youtuber. Nobody even comes close! Thanks to your videos I went from wanting to throw this dang ender 3 in the dumpster to printing a pretty high quality calibrate cube!

@IzoPix 2 года назад

"Long time listener, first time caller". Great video with good little tips on how to expand your usual printing universe. תודה רבה!

@joezeejz Год назад

Awesome!! Fairly new to 3D Printing and I appreciate all your wonderful spread of knowledge. Just awesome!!

@calanm7880 Год назад

This filled in so many blanks in my knowledge, thank you so much: you bet I subscribed lol! 37min well invested, took notes so I can practice. The last tip was the most unexpected - what a wonderful innovative way to use 3D printing to recreate this old charming and effective technology (and a lovely picture of your folks)

@kimlawrence4542 Год назад

Amazing tips! Thank you! I was just working on this specific issue with designated infill this afternoon. Eye opening info!

@vakme Год назад

Wow, Irv that's a great video! Thanks for these tips!

@RemScanProducts 2 года назад

Great video. Thank you for explaining the custom FILL. I wanted to use that for a project, and now I can !! Keep up the great work.

@iCatch Год назад

The best tutorial on how to use Cura! Thanks!

@michaelwiginton8587 2 года назад

Love the videos. I learn something new, that I can use, every time. Thank you.

@MakeWithTech 2 года назад

Thanks for the comment. My goal is to teach.

$@eddfraczek3974$

@eddfraczek3974 2 года назад

you are a great teacher. im learning a lot from you. im 78 and love to learn different things. also learning a onefinity cnc which perates in the same manner except with wood. thanks for all your help edd fraczek

@laszlopap5414 2 года назад

Imádom a videókat. Minden alkalommal tanulok valami újat, Még kezdő vagyok. Köszönöm.

@idkarts Год назад

Best video I’ve seen on tips for printing. Thank you very much for this.

@rdotkey 2 года назад

36.05 LOL, my office lights also went off then back on. Nice presentation, I'll need to watch it more times to digest it all. Thanks!

@marliesplays 2 года назад

Very good explained, thank you!

@johnmcphail2726 2 года назад

It's been a long since I've used a VAX! - the 11/750 or the 11/780? - yes, VMS rocked! - now, I've gotten some FANTASTIC tips from your RU-vid channel! - Thank you Irv, your tips have 'bumped' my prints up a few levels!....Oh, now a VAX hooked up to a 3D printer! - YES!

@emanuelcalderon 2 года назад

We have been missing your videos. Thank you.

@MakeWithTech 2 года назад

More to come.

@scorpioo4320 2 года назад

great watching this and learning some great things !! thank you

@actualreplyguy 6 месяцев назад

You remind me of a friendly rabbi at a temple close by that is happy to chat with anyone who wants to have a conversation, temple-goer or not. Really enjoy your videos. Keep the good work.

@illist 11 месяцев назад

this guy is very calming. thanks for the content

@michaelcooper5490 10 месяцев назад

That was awesome, I am totally impressed, Great Video on you. Good Job.

@carljohnson1401 2 года назад

Super tips! Thanks!

@stevemcnerney 2 года назад

Thanks. I always enjoy your videos. Can’t wait for you to get a cnc machine.

@sparkyjackson8479 Год назад

Thank you, very informative. Just what i need

@73cdi 2 года назад

WOW, Great Video!

@billychampy316 6 месяцев назад

Wow that's amazing Sir!!

@mealticketraceway 2 года назад

Enjoy it! Very nice!

@Filmman586 2 года назад

Great Video Irv! So much information I didn't know!...Lou

@MakeWithTech 2 года назад

Glad it was helpful!

@Pigjes 2 года назад

Awesome vid! Thanks!

@pierreolivier5785 Год назад

I would like to thank you for an Excellent video. I have learned so much from you. Keep teaching us thanks and much appreciated.

@rickeyjackson7206 2 года назад

That’s awesome. Thanks

@mbrown5930 2 года назад

great video, learned alot about cura

@stanleyoneil8579 2 года назад

Thanks so much for your info

@SoaringRedEagle 2 года назад

Yes I did..!!!! I had learned something. THANKS!! 👍👍👍👍👍

@itzikovadia851 2 года назад

great video very useful thanks

@mrrcomp 2 года назад

Fantastic Video ! The Lithograph "Cool" Keep up the good work.

@MakeWithTech 2 года назад

Thanks, will do!

@mrrcomp 2 года назад

@@MakeWithTech Just another quick question.. Before I head dive into the Lithographing are you using jus tsimple white PLA or transparent? :) Thamks Looking forward to your input on that.. Meir

@josearnaldopinheirodossant7712 Год назад

Excellent !

@johnhodson8619 Год назад

Thanks for your videos. You have a very concise yet thorough style. I had been looking for a video on lithophanes. What color filament is the best for lithophanes? Also thank you for your review on the Fokoo Odin 3 which I find to be easy to use and reliable. I thought that I wanted an idex printer but I never could get it to work properly.

@mikeyMIKE777HJG Год назад

This was very helpful

@MarcelHuguenin 2 года назад

Thanks again for your video Irv, there is always something to learn ;-) I actually experimented with lithophanes last year and printed some nice ones. I printed them curved, put them in a printed frame with hooks so you could hang them on a lampshade. They are great fun and almost no one knows about them and their history.

@johnhodson8619 Год назад

What pla and color do you find best for lithophanes? Also how difficult is it to get them to be curved?

@MarcelHuguenin Год назад

@@johnhodson8619 this is not an expert advise but I used neutral white that shines nice through and I used a website to create the lithophane that also let you create the curved image. print it vertically. Hang it on a lamp shade and you have a nice photo when lamp is on and just a 3d print when lamp is off. Search for creat litho-hand online. There are several.

@stephenperez3134 Год назад

I just purchased my first 3D printer (a Creality Ender 3 Neo). Thank you for making 3D printing not so scary.

@__--JY-Moe--__ 2 года назад

helpful!!thanks!!

@shannongreenhalgh 2 года назад

Nice video on the infill % in different area's, Because I was thinking about that in cura 4.13.1.... Thanks

@audio-play 2 года назад

Awesome movie, I look forward to seeing more Cura movies

@hogeojin 2 года назад

Always your presentation is super. I am using Ultimate Cura 4.12.1 with ANYCUBIC 3D printer. The printed result is not accurate about 0.5% shrinked. Also I am amazing, that the lithograph print can be 3D printer, I tried that, and opened jpg image, then image convert screen appeared. and your nice mom on your lithopane. Thanks again.

@gouichichefarouk2329 Год назад

Thanks lot for your smart knowledge you just saved my time ,life effort ,

@jimmorgan7765 2 года назад

Thank you for the video, it was very helpful. I have another problem I would like to hear your input on. My Voxelab Aquila printer sometimes will start a job and will arbitrarily decide without any outside interference that the print job has completed. It stops wherever it is moves the nozzle to the back left side of the plate and on the screen says the job has completed. After clearing what was just printed off the build plate I can start the job again immediately and it will print flawlessly. Any thoughts on why this happens? Thank you again for your input I do rely heavily on your knowledge.

@kalargon Год назад

So many tricks I newer knew existed.

@TroyMackay 2 года назад

Uncanny. I had a need for different settings for different parts of a model on the weekend. Could have waited and saved some googling. Thank you.

@MakeWithTech 2 года назад

Glad I could help!

@hermannel1310 Год назад

Very informative video! I learned a lot. Thank you. I tried the image printing process but I keep on getting an "extraneous surfaces" error as soon as I rotate to 90°. How does one solve this? (I am using Cura 5.1)

@stephentodd2104 2 года назад

Another tip is to do infill at 99% instead of 100%. You actually can save a lot of time on the lithophanes. Or just increase wall count higher than the picture needs ( like 50). Looking forward to the next video.

@yeroca 2 года назад

Another thought is that if you are going to stand the lithoprint up like that, it should be aligned along the y axis so that there's more stability as the bed moves in and out.

@paulbritton187 2 года назад

depends on your printer topology.... Ender 5 bed only moves up and down

@nunyabizness6734 2 года назад

For a core xy I think you'd want it at a 45° angle across the bed. The combined x/y movement would give you a greater effective resolution than if it were aligned along the x or y axis alone.

@PilotMcbride 2 года назад

My brain just exploded, 😵‍💫😵‍💫😵‍💫 😉 🤣🤣🤣🤣 I can remember back in the 60s, my dad’s accounting firm used computers to reconcile company finances and write up statements and reports. All done with punchcards. By the mid 80s I was programming in 7 languages and 3 scripts. Now as an old fart things are progressing at such a rate, but it is all fascinating. These 3D printers are truly brilliant and the more I watch, the more amazing they get. Anyway, as soon as I can work out where to hide it from She Who Must Be Obeyed, I’ll grab one, 😂😂😂. Cheers my friend, I enjoy your informative videos, just wish my head would stop exploding, 🤣🤣🤣. 👏👏👏 👋👋👋 🇦🇺

@einsteind 2 года назад

Some very useful tips , thanks, I can't seem to find any info on how the nozzle point affects printing some have a larger flat arear around the hole than others, I'm going up to 1mm (volcano) and there are different style/shapes not sure what would be best, does a flatter end help squash the filament flat or does a more pointy style make a cleaner finish

@einsteind 2 года назад

Thanks in advance

@mamatuja 2 года назад

Hello Dr. Do you know which setting drives the speed of which the wall gaps are printed in Cura?

@stevedodrillsonandoffthewo754 Год назад

Thank You

@glennedward2201 Год назад

I have been wondering about slicer features for custom built printers that are uniquely designed and having the capacity to add the features into the slicer is an important aspect that shouldn’t be overlooked in an industry where were open sourced and relying on independent innovation. Cartesian 600x600x900 with a solid mount bed, moving gantry, servos, etc. gantry auto levels to the bed. This is why customizing can be an issue getting up and running. Thanks for all you do.

@RajPunjabDa Год назад

Thanks a alot it helps me a aloty

@joelrob8606 11 месяцев назад

Genial Merciiiiiiiiiiiiiiiiiiiii. 🥰😍🤩👍👏👍👏👏👏👏

@rccanuck4473 2 года назад

When I draw a custom thread design on a bottle the bottom of the thread is not clean it has loops on it but the top is perfect. Any idea on what I could do to make the bottom thread smooth ? Keep on with the videos great job

@helihubby 2 года назад

Great Channel, thanks so much. Can you help please - I am printing a nose for a model glider that is meant to be hollow, but there is an infill at the very bottom(the start of the print)how do I remove it ? I have no infill selected, I am using Cura 4.13.1 and an Ender3 Pro. Thanks in advance, I am new to printing, about one year.

@gauravmathur4940 2 года назад

Hi 👋 great content , you have reviewed many many ender printers , prusa and deltas , can you make a video on best dual extruder printer system. Which one is recommended and best buy for money maybe under 20K USD

@jonibest8557 2 года назад

I hope someday I can learn from you how you 3d print your grand children or yourself . Thanks a lot.

@imtheone9698 2 года назад

I always watch this guys vids with the playback speed at 1.25. It's a way better experience 😅

@africans1968 2 года назад

Is it possible to slice a big piece with Cura? Thanks for your videos!

@radiofan2454 2 года назад

Whenever I try and add a printer based on an existing printer definition the non-print (margin, gutter, etc.) from the original printer shows up in the new printer. Often the non-print area is different because of the method used to secure the print surface. How do you change the non-print (margin, gutter, etc.) area?

@ilsejansevanrensburg9237 2 года назад

Awesome. Thank you for sharing. What type of filament should I use for doing a photo?

@MakeWithTech 2 года назад

I find PLA works just fine.

@ilsejansevanrensburg9237 2 года назад

@@MakeWithTech, I haven't even got the G28 on my settings

@ilsejansevanrensburg9237 2 года назад

@tradde11, I am a total noob. Apparently my son in law did install all of that. I just don't see it. I am learning as I go and am maybe overkeen🤣🤣🤣🙈🙈🙈

@ilsejansevanrensburg9237 2 года назад

@tradde11, at the start up commands where you showed it. It must be there as it's working, but I wanted to add the G29

@ilsejansevanrensburg9237 2 года назад

@tradde11, I have the Creality Ender 5 plus as well as the 3 version 2

@AstroSmoke. 2 года назад

Another great instructional video. However, adding ABL instruction can be problematic on some printers (CR6SE for example). It is also unnecessary to do ABL every print because the mesh data is saved to memory(if done correctly), from there the printer only needs the z homing to pick up the current height. ABL(mesh) only needs to be done after modest/major changes to the bed surface.

@MakeWithTech 2 года назад

You are correct.

@LogicWheels 2 года назад

True, but since my prints are not time critical (most of the time) I just do ALB with every print, doesn't hurt, just takes a bit longer to start.

@LogicWheels 2 года назад

@tradde11 So many ways to do it :-) Fortunally I never have an issue with non sticking prints. I mostly print on a glass bed with some hairspray. Once in a while a good rinse with hot soapy water to clean the bed.

@gary48500 2 года назад

I am trying Cura for the first time but for some reason when i print the file two corners always are square, but they have a 5mm curve radius, the slicer show the radius but when printed it's not there. any suggestions thanks

@danmatthew1720 2 года назад

Im trying to get a helmet to fit on an ender3 xtender 300x300 bed does not fit but if a pull up a cr10s with same size bed it fits want can i do is it the firmware or the cura slicer thanks

@tommarkettahudson4390 2 года назад

I have an Artist-D Pro. I'm trying to make something similar to the 2 color coin using Cura to slice a FreeCad design. It's giving me fits. Could you do a video on how to do it with my setup? Thanks Tom

@MakeWithTech 2 года назад

Try using the IdeaMaker slicer. It makes it much easier to do two color printers on an IDEX printer.

@tommarkettahudson4390 2 года назад

@@MakeWithTech I tried ideamaker but I kept getting an error when I was trying to export the finished g code. I think that was the problem I had.

@tamjidkhantamjidkhan9260 10 месяцев назад

❤❤❤❤❤❤

@toms.3977 Год назад

I've come to think of Irv as the Mr. Rogers of 3D printing. Howdy neighbor.

@fxman2011 2 года назад

Awesome video. Very informative. Did you know every time someone on RU-vid says Alexa... my Alexa asks did you mean...

@MakeWithTech 2 года назад

Yep. I noticed that while editing.

@kevinlupson6063 2 года назад

Any chance you could do a video on the Ender 6? there's a real void of good information on this printer.. cheers

@TheKdcool 2 года назад

27:30 a better way to do this is the plugin arc welder in the marketplace

@gianf2653 11 месяцев назад

Great video, now ask to you how to import texture i cura? j not find noting 🙂

@CreativelyJeff Год назад

Stop triggering my lights! Lol 😂 good video though

@richardbennett8678 2 года назад

When is Cura 5.0 coming out?

@MetalheadAndNerd 2 года назад

32:40: This could also be used for art by creating stamps or plates for textile printing.

@MakeWithTech 2 года назад

Absolutely. Thanks for sharing.

@vahagnmelikyan2906 2 года назад

How come in 18:06 your main object stays in yellow shape when you're editing, but mine turns into grey ghosts color and I can't see what I'm doing. And yours is like constantly in sliced position.

@3DJapan 2 года назад

G-code isn't even just used for printers, all kinds of machines use it.

@MakeWithTech 2 года назад

Absolutely correct. Thanks for sharing.

@parvariramin Год назад

‏I deleted Cura and reinstalled it, but all my models are very small in size!! What can I do to return the size of my models in Cura to their original size? Thanks

@christianmontagx8461 2 года назад

Is Marlin still present in the market? Everyone i know runs Klipper or Repetier on its printer. The last time i used Marlin was a "Configure, Build, Upload, Test, Doit again"-cycle nightmare. :)

@yeroca 2 года назад

I am not sure that printing use XY is more accurate than using Z. After all, the bead of pla that is laid down is generally wider than the layer height, isn't it? Maybe it's that you get smoother edges?

@MakeWithTech 2 года назад

It is not about accuracy. It is about the size of the movement, the resolution. When printing in the Z direction the resolution is defined by the layer high. When moving in the X or Y directions the resolution is defined by the stepper motor limitations. While the smallest resolution of a layer is generally .10mm the resolution possible due to a minimum turn of your steppers motors is often 1/10 of that. Here is a good article explaining this in more detail: pinshape.com/blog/4-things-you-need-to-know-about-3d-printing-resolution-outdated/

@yeroca 2 года назад

@@MakeWithTech ah, I see, thank you for the explanation!

@Mik_S 2 года назад

When you were talking about reducing blobs I thought you were going to talk about arc welding. I know not all printers will support this though.

@MakeWithTech 2 года назад

That is another strategy that would work if your firmware supports it.

@FUKTxProductions 2 года назад

please do a video on SuperSlicer

@drunken_physics 2 года назад

The man the legend! shavoa tov. I would really love to see you do a video on the best way to print a ball on a FDM as an experienced printer I can tell you these shapes often catch me off guard and fail. but maybe its just me. The challenge being to print the ball with the least supports possible!

@terrypen Год назад

10:27 Just like all good programmers, you should add a comment as to the meaning of the gcode you add, so next week when you look at the code you'll know what it does! I'm assuming by matching the semicolon and Bed Leveling (3-Point).

@christianmontagx8461 2 года назад

When you have blobs in your print you have realy other problems than arcs. :) Arc Welding is to reduce artefacts on rounded surfaces. This artifacts look like you have a n-edged object instead of a round object.

@jennq2915 2 года назад

All hail DOCTOR VAX!

@EdGodoyPlana 2 года назад

I purchased a new McBook Pro with the M1 Max chip and the Cura Software is not compatible. I am still using my old McBook Pro waiting for Cura to update its software to be compatible to the new 2021 McBook Pro with the M1 chip!

@YourLocalRaccoon 2 года назад

Wait specific Mac chips just don't work with Cura? Really? That's so dumb! Cura works on any combination of any hardware that can run standard Windows 10! Boy, am I glad I don't use Apple products; they always seem to have some fault that isn't present on Windows machines.

@MakeWithTech 2 года назад

The issue is the QT graphics framework that Cura uses. They use V5.x and you need QT 6.x for M1 processor support. Cura v5 will be upgraded to QT 6 but I could not find a date fir the v5 release.

@YourLocalRaccoon 2 года назад

@@MakeWithTech I was trying to make a lighthearted jab at Apple, but that's pretty interesting. Don't see why it doesn't "just work" like it does on Windows but I'm not an engineer of any type so I'll just have to assume there are legitimate reasons that Apple is purposefully gimping their newer products like that.

@MakeWithTech 2 года назад

Apple switched to a new processor architecture that has higher performance with less power consumption leading to lower battery times.

@YourLocalRaccoon 2 года назад

@@MakeWithTech But they seem to have omitted something from the CPU internal code that would have otherwise allowed it to run Cura 4.12 without issue. Who knows what else they omitted? Technology advances, but backwards compatibility is still very important.

@dugy40 2 года назад

I need a profile that won’t string. In cura.

@ricardomolina8773 2 года назад

I'm trying to jest tring to get 1 solid print with a 1.0 nozal I I'm tired whin I won't a solid print I should get a solid print mode only like the urinal Cura 4.0 4.13.1 has a lots of problems I'm waiting filllimet and money I can't even get supites I'm getting support arrears for cr10s

@MakeWithTech 2 года назад

Your extruder is probably not capable of pushing out sufficient filament. Try increasing your extruder temp by 10 or even 15 degrees and slowing down your print speed to 30m/sec.