Curiosity teardown: SlingBox

Подписаться 16 тыс.

Просмотров 3,3 тыс.

50% 1

Anyone remember the Slingbox?
It was a video streaming box that would let you stream any video source in your house to another location on the internet . It was intended to let you watch your hometown TV while you were travelling.
I say "was" because it relied on a cloud server that the manufacturer shut down, bricking the boxes that people had bought.
Anyway, I found this one on the curb, so let's tear it down and see what's inside.
There was a community project to resurrect these, but it needed some security credentials to be pulled from the Sling server, which is no longer online...
-----
My tip jar: / pileofstuff
My other tip jar (channel membership) : / @pileofstuff
Buy me a coffee (or a beer): ko-fi.com/pileofstuff
If you are OK with me getting a commission on your purchases, feel free to use my affiliate links:
Ebay: ebay.to/33IF7PA
Banggood: pileofstuff.ca/r/9ajsf
Some other links to products may be affiliate links
odysee.com/@pileofstuff
#ElectronicsCreators
-----
This isn't the only way to do it.
It's probably not the best way to do it.
But it's how I did it.

Наука

Опубликовано:

22 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@mihumono 29 дней назад

Those are 2 Gb - gigabit ram chips, so 256MB and 1GB in total ;)

@eDoc2020 Месяц назад

AFAIK the Atheros 802.11n wireless chipsets not only have great drivers in the Linux kernel, they don't need firmware blobs. Definitely worth keeping. As for the product discontinuation, it certainly sucks. Apparently they started sending out firmware updates to brick them even if you got the third-party server working.

@loveminis31 Месяц назад

Neat tear down. I got few mysterious boxes I should tear down and lookie

@TheUnofficialMaker Месяц назад

MAKE a coffee table and embed it in resin, along with other boards.

@95Comics Месяц назад

take the memory and make your own flash drive!

@frankowalker4662 Месяц назад

My XP laptop uses one of those WiFi cards. LOL. Some useful IC's if you were willing to put the time and effort into removing them. (I would'nt be bothered either. ha ha) BTW, I enjoyed your chat with Dan yesterday.

@pileofstuff Месяц назад

I had fun doing that podcast. Glad you enjoyed it.

@AnnaVannieuwenhuyse Месяц назад

Much more interesting than the tons of cisco set top boxes i have lying around. The card is on a mini-pcie slot. 😊 The RAM is 8 Gigabits, or 1 Gibibytes. The inductors for the ethernet port are galvanic isolators. Some modern rj45 ports have them built in to the port housing.

@309electronics5 Месяц назад

Yeah i have not seen much Linux powered stbs that had wifi cards in pci form

@Derfboy Месяц назад

4:28 That's an mPCIe (Mini PCI Express). mSATA also used this keying but otherwise it's mostly used for WWAN cards. As far as I know lol...

@309electronics5 Месяц назад

"not much to salvage" often thats the case with most (embedded) devices. They put most of the functionality in the linux based os which allows them to easily add/tweak features and yep sadly make the device obsolete. The wifi card might be salvageable and the fan too. Maybe some ports and ir can be used to practice smd soldering. I have a lot of softbricked settopboxes that i or the manufacturer bricked and use it for smd practice

@kyleallred984 Месяц назад

The Wi-Fi card might be mini pcie. Used in older laptops for wifi.

@WanderingCactus Месяц назад

There's a video on here of someone taking one out of a Linksys router and trying to use it on a computer, and running into driver problems, hopefully @pileofstuff has an easier time

@rickhunter1984 Месяц назад

What is the 3rd antenna solder pad ment to be for?

@pileofstuff Месяц назад

Can you post a timestamp? I don't remember seeing more than the 2 WIFI antennas.

@mihumono 29 дней назад

Same pcb for chips with 3 stream MIMO?

@LikelyLagging Месяц назад

what a coincidence i just came into possession of a slingbox model sb240. i was hoping it was some kind of network music streaming device. While i guess it could be i dont have the knowledge on how to make that happen lol Any ideas on alternative usecases? or components i should look for if i decide to tear it apart? i love tech and tinkering but i dont really have the knowledge to build anything so ive been saving stuff for years for when i do decide to find out how to educate myself.

@pileofstuff Месяц назад

as far as I have learned, due to how locked down the software that runs it is, there is little chance it can be used for anything else.

@LikelyLagging Месяц назад

@@pileofstuff unfortunate. Super glad I found your channel though. Content is great exactly the kind of stuff I’m interested in. Idk how I never thought to look for channels like this. Cheers 🤘🏼

@pileofstuff Месяц назад

@@LikelyLagging Glad to have you here!

@snakezdewiggle6084 Месяц назад

I'll have it !!! Do you know anyone flying to Australia? lol You're never locked out. You just have to snoop around till you find A door. I'm sure you know the drill... If not, send 7 Canadian Rupees, in a self addressed envelope.