Тёмный
No video :(

CUSTOM T4 FRONT DAMPER MOUNTS ScarFace LowRiders 

PranceProject
Подписаться 3,7 тыс.
Просмотров 5 тыс.
50% 1

ScarFace LowRider Facebook page
www.facebook.c...
Any enquirys email
PranceProject@yahoo.com
My Instagram ...
Facebook
/ pranceproject

Опубликовано:

 

22 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 56   
@EpicSqu1rrel
@EpicSqu1rrel 3 месяца назад
thanks for this video! I thought id have a look at how shanes plates fit since my T4 needs a drop. Great Vid!!
@PranceProject
@PranceProject 3 месяца назад
Glad it was helpful mate just make sure you have a new shape drill bit is my advice
@teamzfg6553
@teamzfg6553 3 года назад
Very helpful video mate! I was under the impression that there was some metal to remove before the plates would fit up inside the chassis leg but you have done the job without having to grind anything out! Nice one!
@shanephillips8735
@shanephillips8735 3 года назад
I've changed the height of the turret slightly since the combe valley video, so that cutting doesn't need doing anymore
@neiljarrett1064
@neiljarrett1064 3 года назад
@@shanephillips8735 - ah! Makes sense now👌🏻
@shanephillips8735
@shanephillips8735 3 года назад
Cheers for the shout out Carl 🤙
@PranceProject
@PranceProject 3 года назад
No thank you mate 🤙 amazing product
@shanephillips8735
@shanephillips8735 3 года назад
@@PranceProject thank you bro 🤙
@neiljarrett1064
@neiljarrett1064 3 года назад
Get a room you two.... 😉😂🤙
@wayneharker4157
@wayneharker4157 3 года назад
Hi Shane I have messaged you on facebook about this product but no response
@shanephillips8735
@shanephillips8735 3 года назад
@@wayneharker4157 I'll take a look dude, not seen anything yet, give me a sec...
@neiljarrett1064
@neiljarrett1064 3 года назад
Cracking 👌🏻 Got mine through the other day with Shane's short drop links. Just got to decide on which 5" kit to go for via vdub monkies...... 🤔👍
@PranceProject
@PranceProject 3 года назад
Getting it all done in one go nice. Whats ur options?
@neiljarrett1064
@neiljarrett1064 3 года назад
@@PranceProject well, I'm deffo going with the 5" Faulkners as they've got great reviews. Had some imput from Shane, and as my LWB is pretty much a day van, that can be slept in, I'll probably go with 1100 springs. Shocks will probably be the short Gaz adjustables. I've seen a thread about their mounts snapping which made a few people nervous, however, on asking about, I believe it was due to poor installation techniques.... While I'm doing it, I'll be replacing bushes too, probably just with OEM type, as I'll want her to have slightly more 'give' in those areas, so it's not causing slightly more unnecessary shock stress on other components that the stiffer poly bushes might cause....... After all, she's a van, I don't need her to corner like she's on rails😉
@michaelbriers1020
@michaelbriers1020 3 года назад
Think I need a set as since iv lowerd mine it's just sitting on the bump stops now lol
@PranceProject
@PranceProject 3 года назад
And you also need to notch the chassis if your say on bump stops
@michaelbriers1020
@michaelbriers1020 3 года назад
@@PranceProject Oh ok that sounds fun to do that's for that
@T4TipsGuides
@T4TipsGuides 3 года назад
Top job! Any ideas which wheels you will be fitting? I think 16" steels would look good, or even the OE 15" steels.
@PranceProject
@PranceProject 3 года назад
Na the offset to high I've tried the standered 16 and not going to work I need and 16 or 17 7.5 j
@davidhenderson7722
@davidhenderson7722 3 года назад
@@PranceProject I was guna say try steel wheels 👍
@PranceProject
@PranceProject 3 года назад
I think ive found somthing even better
@T4TipsGuides
@T4TipsGuides 3 года назад
@@PranceProject Wooden wheels? Haha! Only joking.
@PranceProject
@PranceProject 3 года назад
Would be cool
@seanphillips1282
@seanphillips1282 3 года назад
So the idea is to give more clearance from the bump stops ??
@theslaytripper7852
@theslaytripper7852 3 года назад
Nice one man ⚡
@PranceProject
@PranceProject 3 года назад
Thanks mate
@stevemcgowan3017
@stevemcgowan3017 3 года назад
So will new shock mount give u more drop I guess my gas shocks fitted by garage seem harsh compared to ones that were on standard I guess the garage did job think they use kyb gas front an rear but lowering spring I got from cmc is too low it’s 60mm sent guy photo but it’s catchin on tyre on bumps etc they said can exchange for 40mm drop one ☝️
@PranceProject
@PranceProject 3 года назад
It does give alkttle drop but on like 10mm max nothing really, there more made to improve the ride quality. Your wheels must be wide with big tryes to be catching on 60mm springs.
@stevemcgowan3017
@stevemcgowan3017 3 года назад
245/18/45 tyres .just caught on outside mine is caravelle.vdubmonkeys said belle was lower.i got full kitchen extra batteries in middle van some tools back van.metal rock n roll bed
@stevemcgowan3017
@stevemcgowan3017 3 года назад
some people recommend 40mm voghtlands springs
@stevemcgowan3017
@stevemcgowan3017 3 года назад
Do you think the Sachs hd short shock be improvement of kyb gas just had at front seems bumpy hard ride down
@stevemcgowan3017
@stevemcgowan3017 3 года назад
@@PranceProject it was the 60mm drop it was catching on 40mm ok now.👌
@RicksAquariumsuk
@RicksAquariumsuk 3 года назад
Nice easy job 👍 have you got a link to purchase these 🙂
@PranceProject
@PranceProject 3 года назад
Yer mate best place to get hold of Shane properly is scarfacelowriders.bigcartel.com If it says sold out then got to the bottom where it says contact and he will proberly make to order 👍 tell him I sent you haha
@shanephillips8735
@shanephillips8735 3 года назад
Hi Richard, I don't list them as I can never keep up, best to contact me and I will sort you out 🤙
@simonsmith4354
@simonsmith4354 2 года назад
Great video, what length is the drill bit you used to go through? Standard or extra long?
@PranceProject
@PranceProject 2 года назад
Just a standard one mate
@Kai77884
@Kai77884 3 года назад
Hello a great video perfect 👍👍👍👍from Germany 🇩🇪 👋👋👋Kai✌️
@PranceProject
@PranceProject 3 года назад
Thank mate 🤙
@stevemcgowan3017
@stevemcgowan3017 3 года назад
I may change front shocks to better ones Sachs hd short ones vdubmonkeys said will see how feels after had 3 ball joints done at front as they knackered
@stevemcgowan3017
@stevemcgowan3017 3 года назад
Have you camped in van yet thjs year ?we off Blackpool thjs weekend with some. New scooters handmade adult Mibo Royale will do video of kick scooters they have races on some 😀
@PranceProject
@PranceProject 3 года назад
I havent yet no but hoping to soon, that sounds awesome
@staurosnikolaou7713
@staurosnikolaou7713 3 года назад
whats the reason to replace the original mount?
@PranceProject
@PranceProject 3 года назад
The new mounts help to be lower, there stronger snd have less play in them
@furgonetapirata
@furgonetapirata 3 года назад
Hey 👍
@PranceProject
@PranceProject 3 года назад
Hi
@deandempsey264
@deandempsey264 3 года назад
I thought you were gonna cut some van away to get them to fit 😢😢
@PranceProject
@PranceProject 3 года назад
No cutting needed just drill a hole
@deandempsey264
@deandempsey264 3 года назад
To make the wheels fit 👌
@PranceProject
@PranceProject 3 года назад
What wheels fit?
@deandempsey264
@deandempsey264 3 года назад
Those banded steelies 👍 learning so much from your vids
@PranceProject
@PranceProject 3 года назад
I didnt need to cut anything to make them fit
Далее
Fitting New Wheels For More Lows
11:19
Просмотров 1,4 тыс.
PEDRO PEDRO INSIDEOUT
00:10
Просмотров 2,7 млн
💀СЛОМАЛ Айфон за 5 СЕКУНД😱
00:26
Новый фонарик в iPhone с iOS 18
00:49
Просмотров 539 тыс.
VWT4 Limiting Straps Install
12:13
Просмотров 3,8 тыс.
DROPPING THE BUS! #vwt4
26:27
Просмотров 13 тыс.
Jon Buys A New Van For NC500 #vwt4
19:00
Просмотров 1,1 тыс.
Installing Faulkner 5 Inch Springs On My T4
11:48
Просмотров 2,5 тыс.