Customer States Compilation (Welding FAILS) | Just Rolled In 

Hope you guys enjoy this booger weld compilation! Submit your clips/photos on our website at www.justrolledinyt.com

Using a welder to fix a fuel leak sounds like a Darwin Award candidate.

Some of these 'welds' are almost like art. the patience and comitment to doing the wrong thing is staggering

I've been a mechanic for 60 years and I'm the first to admit I'm not a good welder but my worst looks better than anything shown here. Absolutely amazing the shit people do to their vehicles. Quite scary knowing these things are out on the road with us!

the jb welded oil filter killed me. Bro they are like 17 bucks at advanced. 🤣🤣🤣

"Structural booger welds" is a phrase that makes me laugh and cry at the same time.

When installing a new exhaust, always make sure to use the ENTIRE spool of wire.

Good to see that shops are reciprocating on the customers who “decline repairs”.

that cracked wheel is probably the best welding work done on any of these clips, though I'm sure that would have been fun to try to balance to say the least.

Some of this work by “friends”. With friends like this you don’t need enemies.

You know, I have more respect for customers who are honest about who did the work instead of "another shop".

Welded the fuel line, wowzers.

This channel might be the most quietly terrifying channel on RU-vid. Well played.

This channel is the best answer for the profound need for state safety inspections, environmental compliance inspections and so on. good freaking god these people are a menace and these poor mechanics are the only ones who can save us from their sense of adequacy.

Just Rolled In induces existential angst in his audience without a single shot of spray foam.

Remember to hold the welder at least 6" away from the steel to make sure you get the maximum amount of bird shit on there.😂

These mechanics are far braver than I am; I wouldn't want to be underneath most of these vehicles as they look like they could just break apart at any moment!! The phrase "Just enough knowledge too be dangerous" applies to pretty much everything here!!

Soup cans were the best for fixing exhaust leaks on my car when I was a broke kid.

I can't imagine why that u-joint was vibrating 🤣

To try to fix your fuel line leak with a welder truly puts you at another level

Lol! "I don't know what he's doin', but he's doin' it himself!"

"It´s a load-bearing booger ! "

This makes me feel pretty good about my welding.

$70 bucks via Amazon and You Too can be a Welder!🤣

I think what's most impressive about the massive weld jobs done poorly, is that they are done consistently poorly, indicating that not only did that person have absolutely no idea what they were doing, but that they spent hours (tens of hours?) welding and learned absolutely nothing that entire time.

I've seen some bogger welds in my day, but some of these were like terrycloth!

There's not a cave in the world that can match the beautiful, crystalline structure known as booger welds.

The Astrovan with the welded idler arm and no front shocks, and the trailer coupler that was unwelded are two of the scariest stories on here. We all know that they continued to drive or tow with all those problems. Really gotta love the Chia Pet welds on the exhaust pipes on so many of the cars!

That one exhaust had $100 worth of JB weld on it. Lol.

Some of the most glorious weld nests i have ever seen.. They remind me of those sculptures of insect mounds.. when they pour the molten metal down the hole then dig them up rofl.

To all the people who have friends that say they can fix the problem, RUN AS FAST AS YOU CAN THE OTHER WAY. THE BEST OF THE BEST ALWAYS. 👍👍👍👍

The 7 billion “tack” method is painfully hilarious. The fact that there were so many examples of the method being used absolutely mind blowing.

Watching these clips makes me thankful that I live in the south without the major frame rust issues .

WOW 😳 terrifying that we're sharing the road with these death mobiles.

I am here because my old vw bus is rusty and i want some tips for welding. Thanks for the good instructions, but i think it is to much effort and i will maybe use just spray foam 😊

*(**1:44**)* - It's like the person just took whatever metal items he could find in the garage and welded them to the vehicle. Holy crap that is insane!!!

Some of these folks welding up exhaust systems should switch to making metal art porcupines. Pretty sure that is where their talent lies.

welding a fuel line - Darwin award material right there

Welding experts!💪👍👍

"And he re-did the whole exhaust for the customer." How refreshing! Much better than "customer declined repairs."

Makes me happier after a colleague was slating my welding. So far my work hasn't failed but his has!

I don’t understand how so many people can be so clueless these days with all information on any subject on the internet. We used to have to go to the library for this information and it was hard to find.

The oil filter is wild. Used 8$ worth of JB Weld on a 5$ oil filter

Man as an amateur working on my mustang, seeing this makes me feel real good about my welds. I thought mine were bad but these are on another level. Even had to replace the rear frame rails with custom one.

My question is, how can the guy doing the voice-over do so without bursting into outrageous laughter! I mean, I'm watching this and my sides are hurting! I can't imagine trying to read copy for these disasters!

The three stages of welding. 1. Pecker Weld 2. Booger Weld 3. Hornet's Nest

This is why I take my car to a mechanic! Never underestimate the power of a professional. Those JB Weld fixes are always . Thanks for the laughs and the reminder to leave car repairs to the experts.

Some of those welds looks like the swallows nest. Pure art.

My friend has owned his own muffler shop where we live for 25 years..oh the stories he could tell ya about some welds he has seen.😂😅 He started taking pictures about 10 years ago,and posts them on his bulletin board.😊

Thank goodness we now have spray foam to handle these kinds of repairs

2:43 holy shit. I think that qualifies as art because it stirs up emotion

welding on not just a fuel line, but a leaky one is just too classic!

"Here, Bubba, hold my beer while I weld this fuel line!" 🎆

These make me feel so much better about my welds. I've never had anyone show/teach me how to weld but mine look professional compared to these!

"The shop/technician refused to work on it." Best decision ever. In many businesses the quality of the customers is as important as the quality of the work which keeps them coming back when something else needs fixing. Good work for good customers will often bring in more 'good' customers: The power of "word-of-mouth" advertising is often seriously underestimated.

These days, how hard it is to watch few videos how to weld, or even how it should be look alike? A little practise! Amazed!

Can we get a video of the opposite? The BEST weld repairs you’ve seen? Weird, unexpected repairs done with a welder/JB Weld that are just amazing. And ones that improve the car beyond OEM!

This was excellent!! Structural booger welds 😂🤣😂🤣 your the best!!!

The customer did not mention what other shop did this, is my favorite running joke hahaha

They drive among us. Greatest pro-seatbelt video ever.

I genuinely don't understand how people end up welding like that. I picked up my first welder at... 11 or 12 years old. The type with the carbide gas that you had to fill up and wait for the gas to fill up and raise the catch tank. I was told what to do, and sure, it was a sh!t weld, but it wasn't anything like this. I got my first stick welder (second hand) at 15. Wasn't told how to do anything with it, welder better and better. Never popcorn. My first mig and tig rig was at 16 and while i had issues with melting through, i've never managed to make popcorn out of it. Most of my early learning was by ear. I was 21 when i went to properly learn how to weld. I never saw welds like in this video (and across the internet) from any of the other people who learnt welding in that class with me and we were 30 people in that class. So i must conclude that this is just a super power... but in the negative. You have to be special to popcorn.

JB Weld dissolves in petroleum, like gasoline and oil. LOL

"welded" his fuel line lmao the stupidity is off the charts. Amazing he lives to tell the tale

Tried fixing a fuel leak with a welder. 💥

These people need to find better "friends" that actually know how to weld 😂

This just never gets old.....

It's easy to turn on a mig welder. Pretty fireworks too.

It take hours to make that many stuck welds. True dedication.

The welding seen here, makes my sh t welds look downright beautiful...😂

If you didn’t see it you wouldn’t believe it.😵‍💫

Over 30 years under a welding hood. I’ve seen a lot but oh man, the dedication to doing it wrong is strong with some folk.

Now all we need is a spray foam fixes everything episode 😂😂

From foam to JB weld...what's next Zip Ties

These people must be exhausting more time and money than it takes to have someone do it correctly.(mainly the welded exhaust clips)

With the rise of spray foam, JB Weld makes me feel nostalgic.

Amazing but that Lincoln navigator broken before ever being delivered was one of the most amazing. The fact that people did this welding stepped back and looked at their work and decided it was good enough is just stunning.

The worst one are the cheap ones, what's the thought process behind trying to DIY fix a leak on a fuel line or a tie rod with a welder...

how much does JB weld cost compared to an oil filter?

It's reassuring to see these videos and be grateful for living in the southern region where major frame rust problems are not as prevalent.

Get chills by looking into a crystal ball & see these customers in the future working with their welders on an electric car, god forbid 😮‍💨

$150 Harbor freight wire feed welder ... everyone thinks they can weld now.

...when i watch these videos ..all i do is laugh....wow.....

I'm going to keep this video in mind every time one of my favourite content creators say they're bad at welding. I'm hoping it will lift their spirits, and give them confidence that they're almost professional in comparison to these.

Fascinating "repairs" you have there.

do these people not know they need shielding gas with their tig/mig welding? or just not care? I just wonder, because I know this, and I have literally never welded anything.

Some of those exhaust welds 😲 did they try to weld without gas but not using flux core wire?

Anytime a commenter gripers about my welds on one of my project videos, Ima respond with a link to this video.

Every video on this channel makes me laugh out loud at least once.

how in the hell do they manage to put on those booger/popcorn welds and how long does it take them to get them so thick.... jesus Edit: Like for real, do they just keep the car running and weld until the exhaust pipes stop smoking?

why are these people try to mig weld without gas?

Mary Bonham, who developed JB Weld with her husband in the 1960s in Sulphur Springs, Texas, recently passed away. RIP to an icon.

I did patch up a hole in the spare wheel well on my car once, in the most botched way you can imagine. But that was just to keep water out until I could get it properly fixed, which I did a couple of weeks afterwards. Some of these folks on here are on quite the level!

That welding makes me itch, it is like a product of small insects.

The welders probably think they are the best welders of the human race.

Wow, these are pretty amazing 🤣🤣🤣🤣

Turns out it was the same guy mucking up all of theses cars! LOL!

God I thought my welds are bad still since I started learning, but even my first weld was better than these popcorn welds😂

I'm a self taught welder but even when I had no clue what I was doing my welds were pretty compared to the chaos I saw here. I wouldn't even know how these welds were done.

I used to use JB Weld as a quick patch on small holes on canoes and boats that had been run into rocks, but I never thought about using it for structural auto repairs. I guess I don't qualify for "other shop worked on it" status.

EXCELLENT! ❤