Cute Jam Design Bottle Cap
マイボトルキャップでお悩み解決!お茶目なジャムデザイン♡
creator:勝又美蘭 Instagram @fantasia_miran
これで安心♡自分だけのオリジナルボトルキャップ!!
どれが私の飲み物だっけ?のお悩みはこれを使えばあっというまに解決です!
今回はちょっぴりユニークにこぼれちゃったジャム瓶風のアレンジを加えました!
【Materials】
· mold
· rubber band
· UV-LED resin hard
· UV-LED light
· Toning stick
· Bottle cap
· Super Cemedine (glue)
· Acrylic paint red
· Resin coloring agent red
· Color Sand Black
· Spoon charm
· Labels for jams
· Tape glue
【Steps】
1. Put together the bottle mold and close with rubber bands
2. Pour resin into mold
3. Push into the mold and harden it
4. Remove from the mold and remove burr with pincers
5. Pour the resin into the bottle bottom part mold and cure
6. Spread the resin on the bottle bottom from 4 and stick the bottom from 5 and harden it
7. Spread the resin on the bottle cap and bond to the bottle
8. Mix the cemedine and acrylic color on the clear file folder, thinly spread, and dry
9. Peel off from the clear file folder, tear by hand and round
10. Add red coloring and color sand to the resin and mix
11. Pour 10 in the bottle and put 9 in
12. Spread the resin with a stick, set the spoon on and harden
13. Pour resin in again so as to cover spoon
14. Place 9 and cure
15. Pour the resin several times into the side of the bottle cap and cure
16. Stick the jam bottle label with tape glue and complete
【用意するもの】
・モールド
・輪ゴム
・星の雫 UV-LEDレジン ハード
・UV-LEDライト
・調色スティック
・ボトルキャップ
・スーパーセメダインX
・アクリル絵の具 赤
・レジン着色料 宝石の雫 赤
・カラーサンド 黒
・スプーンチャーム
・ジャム用ラベル
・テープのり
【作り方】
1.瓶のモールドを合わせて輪ゴムでとめる
2.レジンをモールドに流す
3.モールドを押し込んで硬化させる
4.モールドから外してヤットコでバリをとる
5.瓶の底用モールドにレジンを流して硬化させる
6.4の瓶底にレジンを広げ、5の底をはめて硬化させる
7.ボトルキャップにレジンをつけて瓶を接着させる
8.クリアファイルの上でセメダインとアクリルカラーを混ぜて薄く延ばし、乾燥
9.クリアファイルから剥がし、手でちぎって丸める
10.レジンに赤い着色料・カラーサンドを入れて混ぜる
11.瓶の中に10を流し、9を入れる
12.ステックでレジンを広げ、スプーンを置いて硬化
13.スプーンにかかるようにレジンを再度流す
14.9をおいて硬化
15.ボトルキャップの側面にレジンを流して何度か硬化
16.ジャム瓶ラベルをテープ糊で貼り付けて完成
お気に入りのジャムを作ってみてくださいね♡
18 янв 2019