Cutting Board 3D Effect (Chevron)

Подписаться 61 тыс.

Просмотров 1,8 млн

50% 1

#cuttingboard #woodworking #chevron
Something new this time!!! I make also a lot of cutting board soo here it is
my third time making this model of cutting board pretty easy to make and the 3D effect work great the look is perfect
I also sell some of my cutting board on my Etsy shop
Let me know if you want to see more woodworking video like that
Thanks for watching
VIlly
www.amazon.ca/...
Etsy shop: www.etsy.com/c...
Sponsor :
magicresin.ca (10$ of discoount promo code VILLY10)
lunardust.ca (10% of discoount promo code VILLY10)
www.starbond.com (10% of discoount promo code VILLYWOODTURNING)
rockroosterfoo...
TOOL AND MORE
Magic resin deep pour and casting amzn.to/3tPzY5V
Japanese saw : amzn.to/3q9JEpq
Lunar dust mica powder : amzn.to/3tFPscv
sanding pad 5 inches : amzn.to/3rGBN39
carbide gouge round : amzn.to/3aM0Nix
carbide tool round small : amzn.to/3d91563
carbide gouge square : amzn.to/3jyOwSH
carbide gouge diamond : amzn.to/36X2NmY
carbide gouge hollowing : amzn.to/2MSyAOZ
video light : amzn.to/3p7RdeS
wall mount : amzn.to/3q7klEp
saw blade : amzn.to/3tGqIRb
glue titbond : amzn.to/3cUVa46
wood glue dispenser : amzn.to/3p5dU3w
2 inches sanding pad : amzn.to/3jCpYbd
bessy clamp : amzn.to/3cSnSTn
T track : amzn.to/3aJJwGG
cutting board feet : amzn.to/2Nc7HFu
starbond CA glue : amzn.to/3jyKrxR
disk sander : amzn.to/36TURTh
disk sanding 15 cm : amzn.to/2MI8Q8a
revolutionary tool (hollowing tool ) : amzn.to/3aS3AXx

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@jessjackson2949 Год назад

the author does like to from scratch, shaping and trimming wood from large blocks into fine finished products. ru-vid.comUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ as another reviewer mentioned, most projects require a lot of high-dollar equipment that most of us dont have the room or budget for. But, knowing how to do these things, even if we wont be able to practice the full stack project, is still great.

@AtifHasanReflections 3 года назад

I sometimes wonder who are these hopeless people who dislike such wonderful piece of Art!

@Villywoodworking 3 года назад

A lot of people have nothing to do hahahaha I don’t care I made what I like and I’m a beginner so I learn

@johnross3251 3 года назад

Haters

@freddypatterson8653 3 года назад

Biden votes, hehe.

@Villywoodworking 3 года назад

@@freddypatterson8653 👎🏼

@JA-gf6zl 3 года назад

Trump was better

@ianprobyn8824 2 года назад

My eyes decievd me, never thought the surface was level. What a superb optical illusion. And such workmanship.

@Villywoodworking 2 года назад

Thanks you sir

@ralphspinardi6903 2 года назад

Gorgeous work! You mention being new(ish) to woodworking. I'm old and started young. Broke most every safety rule with too many bad scares and some injuries. Still have 10 fingers. I know several woodworkers who don't. Long way to say, IT HAPPENS SO FAST it's impossible to imagine. Please, please give a little more thought to safety. Luck is something that sometimes turns. And yes, I now do everything I can to stay safe in the shop. Again, big praise for your craft.

@kangacrew540 2 года назад

Having wood with really good grain can be amazing too. Great job. Pro look. Easy to sell at the right price. Love your work. Chess boards would be just down your Ally...

@MrArik86 4 месяца назад

I loved every minute of the video, and shuddered when I saw the tablesaw being used. :(

@timffoster 2 года назад

Good job. Suggestion - for the first glue-up, don't glue the sticks all along the same edge (perpendicular to the first stick). Instead, glue each piece at an offset that matches the chevron angle. Then when you cut the first chevron angle, you'll have much less waste.

@Stewarts_Woodworks 4 месяца назад

Can you further explain what you mean?

@dhamithruVLOGS 2 года назад

That's not a cutting board, it's a work of art !!!

@atteljas 3 года назад

You made me feel stupid. Ive done loads of cutting boards but somehow havent thought about making a wavy board. I truly thank you for a kick in the rear. Much apprecited

@Villywoodworking 3 года назад

Your welcome

@GuildOfTheBlackCrow 5 месяцев назад

Don't ever use a table saw like this kid does.

@guggsdusty3674 4 месяца назад

Couldn’t agree more ! Fantastic workmanship but ……… no riving knife , no crown guard and hoodie drawstrings dangling down! Beautiful, beautiful work tho .

@DavidPayne-j5z 18 дней назад

Only extremely dangerous

@tomjohnson9976 14 часов назад

Blade too high as well.

@joelmiller8110 3 года назад

Great video, but I feel I should say for any beginners that your table saw safety isn't up to scratch. You often leave your blade too high, coupled with no riving knife means you are far more likely to get kickback. If you do, you are stood right behind your piece. I've seen (on Stumpy Nubs channel) kickback spear a 2x4 straight through a solid door. OUCH!

@gregtrokey5575 2 года назад

Couldn't agree more...I held my breath for a moment....riving knife, always.

@Fetidaf 2 года назад

I was thinking the same thing; no diving knife, not really using a push block, blade too high…. Disaster waiting to happen

@JohnDoe-bd5sz 2 года назад

Also if you look at the cut edges, it looks to me like his saw is not very sharp.

@Vasislaw 6 месяцев назад

Craftsmanship. Beautiful, just beautiful.

@jercubsfan 3 года назад

That juice groove jig is BRILLIANT

@jarvistiffany1986 2 года назад

If I created something like that I would even use it to cut anything on top of it. I would hang it up on a wall and watch it everyday I get home.

@born2bsalty756 3 года назад

Safetywise a -10 :>

@Stewarts_Woodworks 4 месяца назад

Holy moly I am definitely about to do one of these. Had no idea the chevron pattern was this easy. Thanks!

@williamroozenboom3269 2 года назад

Beautiful piece and a true craftsman. I've made a few similar boards and recently tried to offset the pieces in the first glue-up so they follow the angle of the subsequent cut. It definitely takes more clamps, but when making angled cuts, it significantly reduces waste (those big triangle cut-off pieces). Hope that helps

@AJ-kw8gm 2 года назад

Nice idea! We all learn by listening and sharing knowledge. Ty

@kath182 Год назад

Great jigs!! I love jigs. This guy is so detail oriented, I love it. He makes things like I do, with great attention to detail. ❤

@EllisDesignandTradeCo 2 года назад

I legit thought the board was wavy lol, my brain tricked me!

@Villywoodworking 2 года назад

My job is done 😎

@germcrazyshokoff3623 2 года назад

I was making this cutting board over the weekend and, moving too fast like an idiot, sliced off the tip of my thumb off on the table saw. 48 hours later and now I am heading down to my workshop to finish it up (and show the table saw who’s boss). I hope the final product looks as nice as yours so it was worth the agony! Thanks for the video!

@Villywoodworking 2 года назад

Thanks for watching

@onefeather2 3 года назад

Beautiful and a piece of Art.

@Villywoodworking 3 года назад

Thanks baby

@MultiMooncow 2 месяца назад

Beautiful woodworking. Don’t take unnecessary risks near that blade dude.

@beastmodemaniac7530 3 года назад

i really don't get why there are over 180 dislikes? I mean they must have serious issues. Man this was awesome to watch and so much thought and talent went into this. Thank you for showing the world this complete build. This is just outstanding

@Villywoodworking 3 года назад

Thanks you very much I got one to sell on my Etsy shop if you want one for you or for a gift

@will4417 3 года назад

It might be to tell RU-vid to stop suggesting similar videos. There is a "not interested" option from the main page, but not on the video once you've clicked. Doesn't necessarily mean that those people think this is poor craftsmanship.

@willlock3644 2 года назад

Could be because he spits on his own work at 9:34.

@bhough410 2 года назад

Maybe they didn't like the fact that he didn't use a push stick (especially on cuts way too thin), setting a terrible example for other woodworkers trying to learn a new craft. Maybe they came here to learn how to make this rather than just watch someone make it. He left out some critical directions for how to make this. I.e. degree he cut the original slab on the miter saw, what wood glue he used or that he didn't extensively soak it in mineral oil before using butcher block conditioner (like what's recommended in overwhelming majority of other cutting block vids) etc... It is a gorgeous piece none the less. I will also add his method is easier than some other vids achieving the same result.

@jesseerickson662 Год назад

It's because nobody wants a wavy cutting board

@Anonymous-fx5bu 26 дней назад

That is a really nice cutting board. I hope you water raised the grain before you oiled it, otherwise it's gonna get real fuzzy the first time it's washed.

@PMW420db 3 года назад

This is absolutely amazing craftsmanship. I was considering making my own however after seeing this I want to buy one!

@Villywoodworking 2 года назад

Mais your own it’s so better

@rudigerchristensen1180 2 года назад

Ppe

@Akhazmat907 2 года назад

I want to do this but for a revolver grip. That would look so amazing.

@adrianzapata4723 3 года назад

Beautiful work but wish you didn’t brand the top of the board. Should do the bottom so the cutting surface is unadulterated

@hi79cruisers90 3 года назад

Ur a legend!!! I love you work you inspire me a lot I’m 13 and I I do this sort of stuff in my workshop in my spare Time with my dad and with metal I use all types of metal and all types of wood I love making stuff

@Villywoodworking 3 года назад

Thanks you very much if you want some tip and trick with wood 🪵 juste email me villywoodpecker@gmail.com

@richardvedder776 3 года назад

Amazing! Get a kick out of all the advice in the experts' comments.

@Villywoodworking 3 года назад

Hahah don’t worry 😉 Pro always gonna be Pro 😂😅😅😅 thanks you sir for watching 🙌🏻

@paulmcdonald5287 3 года назад

Its the thumbs down brigade that makes me laugh prob people that can't even hammer a nail into a piece of wood let alone create something that takes a level of skill

@Villywoodworking 3 года назад

@@paulmcdonald5287 😎😎😎

@paulmcdonald5287 3 года назад

@@Villywoodworking I have been turning wood for many years and I know to create something beautiful takes skill and is an art form people that give thumbs down don't really have any idea what it takes to take a piece of wood and turn it into something beautiful or practical the way I see it if your happy with what you have created then thumbs down dosent mean anything nice work and beautiful board

@MeioAmericano 3 года назад

Hello how are you? What is the angle of her first cut you made in the miter?

@nothingbutice3833 3 года назад

Was perfect.... then added rubber bumpers. Very nice. Thanks

@Wimpleman 3 года назад

Anyone else get anxiety from those dangling cords from his hoodie next to powerful machinery?

@TheVectorious 3 года назад

Also him pushing the wood through with his fingers. The push stick is right there!

@purv989 3 года назад

I’m still anxious just thinking about it.

@grantskelton1219 3 года назад

That is a nice looking board

@asterman2463 3 года назад

I made a coffee table the exact same way. I found that during the 1st glue up I could offset each bored by a couple of inches so that I minimized the off cut waste by only cutting the very corner of each color on the first diagonal cut. Other than that exactly the same. Nice vid

@Villywoodworking 3 года назад

Thanks for watching I know if I offset some piece I minimize the waste ! I use my waste to make little board just like the. Big one and sell it for a pair

@hmingsangic7803 3 года назад

Good

@clarklowery943 3 года назад

what are the wood types?

@Villywoodworking 3 года назад

@@clarklowery943 maple 🍁 walnut and mahogany

@nathanielsnyder1511 2 месяца назад

Man beautiful board!!! As far as all the safety police in the comments. They don't understand that some table saw operators understand what causes kick back. That's why they're comfortable using just their hands. They have control, John Heisz from I Build It is a perfect example. He explains it in some of his vids.

@Villywoodworking 2 месяца назад

@@nathanielsnyder1511 exactly

@umangtekriwal4879 3 года назад

Before the title I saw the thumbnail....and thought you were crazy......😂😂😂. Loved it though....

@lisapupillo1724 Год назад

This is definitely one of my favorites!

@marcelocarvalho6281 3 года назад

Perfeito,parabéns,muito bem executado ,show a ilusão de ótica que ela apresenta.

@Farooq_Bhai_ 3 года назад

This was great. Thanks for no music!!

@Villywoodworking 3 года назад

It’s a pleasure thanks for watching

@liammmm3725 3 года назад

No one: Absolutely no one: Me at 12am: Watching not knowing what half these machines are

@Villywoodworking 3 года назад

????

@tylergrove7700 3 года назад

Table saw, planer, router, clamps, glue. That was it.

@djtasso9396 3 года назад

Das ist zu schön um da drauf etwas zu schneiden.... SUPER Arbeit! 1000 likes 👍👍👍

@burnwash8174 3 года назад

Einverstanden.

@luizpaulopretti5219 2 года назад

Espetacular! Verdadeira obra de arte. Parabéns!

@StarshyMaster Год назад

Отлично получилось! Спасибо за идею! Попробуем с мальчишками сделать подобную разделочную доску.

@williamgronowski1683 3 года назад

anyone else get anxiety when his hand was an inch from the table saw blade

@nothingbutice3833 3 года назад

Gonna happen someday

@ivanlourens2682 3 года назад

His hand William, his hand got anxiety.

@masonzizovski449 3 года назад

I think it's a saw stop so he's safe, but still good habit. Plus the brake CAN fail and I wouldn't trust my hand with it.

@drkline69 3 года назад

Push blocks are the way to go.

@zepryspet Год назад

Yeah...and the push stick is right there.

@grinpick 3 года назад

Very cool. I rarely subscribe after watching just one video on a channel. This time I did.

@Villywoodworking 3 года назад

😎 thanks you very much

@howlingink 3 года назад

I love the illusion

@lcbach9201 2 месяца назад

Bom trabalho...parabens👏👏👏

@mikejones-fw2vc 3 года назад

ok, that's pretty dope

@Villywoodworking 3 года назад

Thanks man I work on a new pattern 2.0 gonna be more dope 🤘🏼

@HebuTheLoneWolf 3 года назад

man that looks good. that cutting board is a piece of art

@Villywoodworking 3 года назад

Thanks you very much

@bestevidencevideo4783 3 года назад

very nice project but why are you so careless when using the table saw?

@Villywoodworking 3 года назад

I’m not when you cut a piece with N angle I prefer with hand ✋🏻 for avoid the kick back I look like I’m not but I’m very careful

@unclemoe5733 10 месяцев назад

Sweet

@deweyc9451 3 года назад

That was the most efficient method of producing a chevron effect I have seen. Very nice! Do you have plans to your router jig?

@Villywoodworking 3 года назад

Thanks you in the description of the video you got the link to kings fines woodworking and I bought this guy

@deweyc9451 3 года назад

Watched again, what angle on the miter saw? 45?

@Villywoodworking 3 года назад

@@deweyc9451 no the angle on the mitter saw it’s 30

@iangreene8720 2 года назад

Haha that tall ass blade cuttin thin wood is pro level finger removal technique

@MossyOaks9 3 года назад

Nice board. Would be a lot safer to use a riving knife if you have one for the saw though. Im thinking how you would make that tapered cut safer with a push stick rather than your hand. My butthole would pucker a bit doing that with no riving knife and by hand lol.

@jim6690 3 месяца назад

I used to use my table saw like that. Sure do miss that thumb.

@EnergizerTX 3 года назад

i really like the total design (cut work), and that effect isn't bad either.

@garethjks68 3 года назад

Dude ur hands are way too close to that saw and they should never be in line with it , u also don't use a saw guard, it only has to happen once and it in trouble , nice work btw but stay safe

@garethjks68 3 года назад

Push sticks should be 350 cm long I think and I’d use two , I was a wood machinest once ,

@SmDJeremy 3 года назад

He did many, many unsafe things. Hope it doesn't take losing a few fingers before he changes his practices.

@garrettjones1699 3 года назад

Push sticks are for fembots and gypsies. A real man keeps his fingers close to the moving blade

@alexgamblin4679 3 года назад

It's a Sawstop. Those can't even cut through a hotdog let alone a finger. Also they're his fingers...and who uses a saw guard? Riving knife sure but saw guard?

@neatfreak1000 3 года назад

Man, I flinched when I saw how close his hand got to the blade. Never watched after that. Never saw the end product. Just came right here to the comment section.

@cindyw5435 2 года назад

I'm speechless, this is absolutely incredible! Such talent!

@taylormzalewski 3 года назад

I'm lost on how the depth visual is happening

@Villywoodworking 3 года назад

Tjs illusion is pretty good Thanks for watching

@PBUCKY1969 3 года назад

Beautiful work Villy 👍

@ericmeagher6113 3 года назад

I'm just beginning to start my venture into this woodworking hobby. Thank you for taking the time to upload such an informative video; I loved it and the piece you created. I learned so much about how I could put my same tools to work. It is so comical reading people's comments, so many BOSSES! Most of them probably would never attempt to make a How-to video. It's not easy to do. You take pride in your work without worrying about what others will comment on; congrats. My question, what kind of wood did you use for this project?

@Villywoodworking 3 года назад

Your welcome sir

@inmybox2023 Год назад

I am going to make one, SOOO COOL!!

@nikolaykostenyuk1855 3 года назад

Класс!👍👍👍😁

@kimcheng6068 3 года назад

good job

@usmevans7 3 года назад

Love the router jig.

@VaracolacidVesci 3 года назад

Im doing this for my mom, she will get a lot of miss cuts with it hahahah

@Villywoodworking 3 года назад

Hahaha

@donaldquinn3610 2 года назад

Looks 3d. Excellent thanks

@kreasiumum 3 года назад

The tool is very complete for a home sclae,....good

@rodpotts2666 3 года назад

Very nice! And I dig that router jig.

@Villywoodworking 3 года назад

Look the king fine woodworking you gonna find the plan for the jig

@jeremyharrison5894 3 года назад

Wow! That's super cool!

@Villywoodworking 3 года назад

Thanks 🙏🏻

@jplieurance Год назад

That was wonderful. Thank you.

@dannythemedic 3 года назад

its very nice

@AVUKI Год назад

Великолепный результат 👍

@Primedieselmaranhao 3 года назад

Very very very nice! Congratulations!

@Villywoodworking 3 года назад

Thanks

@Villywoodworking 3 года назад

if you want to see more of woodworking video like that tell me in the comment and please subscribe

@fasterthansid933 3 года назад

Hi. The strips that you first tore down, were they about 30” long. I’m unsure of what length to do mine to end up with a decent sized board at the end without having loads of waste. Super lovely board. 👍

@Villywoodworking 3 года назад

@@fasterthansid933 i don’t remember this at the end my board have 16x13x 1 3/4 may I suggest you with your waste make a little board the sell with the big one my customer love that little board same pattern and You finish with a very low amount of waster You can also cut the angle for the first glue time but for me it’s a pain in the ass to glued And with the little board I made with the waste I got no waste 😏 Thanks for watching

@fasterthansid933 3 года назад

@@Villywoodworking do you know what I never thought of that!!! Awesome idea, many many thanks. 👍

@Villywoodworking 3 года назад

@@fasterthansid933 👌🏻

@buntharikathaweechaiyapak1074 3 года назад

@fernandotomasvalis5189 2 года назад

man you rocked

@williamlott7612 2 года назад

Beautiful. Darlington, South Carolina

@yuriybetca7657 3 года назад

здорово. отличная работа

@nicholasberdzik8787 3 года назад

dude, I so want a cutting board like that. AWESOME

@Villywoodworking 3 года назад

I have one more to sell on my Etsy shop but bigger but same illusion

@Villywoodworking 3 года назад

@nicholasberdzik

@Villywoodworking 3 года назад

I have on more to buy on my Etsy shop J'ai le plaisir de vous présenter cet article de ma boutique #etsy : cutting board ( chevron 3D effect) etsy.me/2OZPxIt